Formation control of bromate and trihalomethanes during ozonation of bromide-containing water with chemical addition: Hydrogen peroxide or ammonia?

To ensure the safety of drinking water,ozone (O3) has been extensively applied in drinking water treatment plants to further remove natural organic matter (NOM).However,the surface water and groundwater near the coastal areas often contain high concentrations of bromide ion (Br-).Considering the risk of bromate (Br O3-) formation in ozonation of the sand-filtered water,the inhibitory efficiencies of hydrogen peroxide (H2O2) and ammonia(NH3) on Br O3-formation during ozonation process were compared.The addition of H2O2effectively inhibited Br O3-formation at an initial Br-concentration amended to 350μg/L.The inhibition efficiencies reached 59.6 and 100%when the mass ratio of H2O2/O3was 0.25and>0.5,respectively.The UV254and total organic carbon (TOC) also decreased after adding H2O2,while the formation potential of trihalomethanes (THMs FP) increased especially in subsequent chlorination process at a low dose of H2O2.To control the formation of both Br O3-and THMs,a relatively large dose of O3and a high ratio of H2O2/O3were generally needed.NH3addition inhibited Br O3-formation when the background ammonia nitrogen(NH3–N) concentration was low.There was no significant correlation between Br O3-inhibition efficiency and NH3dose,and a small amount of NH3–N (0.2 mg/L) could obviously inhibit Br O3-formation.The oxidation of NOM seemed unaffected by NH3addition,and the structure of NOM reflected by synchronous fluorescence (SF) scanning remained almost unchanged before and after adding NH3.Considering the formation of Br O3-and THMs,the optimal dose of NH3was suggested to be 0.5 mg/L.