To investigate the flow behavior of 2219 Al alloy during warm deformation, the thermal compression test was conducted in the temperature range of 483-573 K and the strain rate range of 0.001-5 s^-1 on a Gleeble-3500 t...To investigate the flow behavior of 2219 Al alloy during warm deformation, the thermal compression test was conducted in the temperature range of 483-573 K and the strain rate range of 0.001-5 s^-1 on a Gleeble-3500 thermomechanical simulation unit. The true stress-true strain curves obtained showed that the flow stress increased with the decrease in temperature and/or the increase in strain rate and the softening mechanism primarily proceeded via dynamic recovery. The modification on the conventional Arrhenius-type constitutive model approach was made, the material variables and activation energy were determined to be dependent on the deformation parameters. The modified flow stresses were found to be in close agreement with the experimental values. Furthermore, the activation energy obtained under different deformation conditions showed that it decreased with the rise in temperature and/or strain rate, and was also affected by the coupled effect of strain and strain rate.展开更多
In order to simulate the microstructure evolution during hot compressive deformation,models of dynamic recrystallization(DRX)by cellular automaton(CA)method for7055aluminum alloy were established.The hot compression t...In order to simulate the microstructure evolution during hot compressive deformation,models of dynamic recrystallization(DRX)by cellular automaton(CA)method for7055aluminum alloy were established.The hot compression tests were conducted toobtain material constants,and models of dislocation density,nucleation rate and recrystallized grain growth were fitted by leastsquare method.The effects of strain,strain rate,deformation temperature and initial grain size on microstructure variation werestudied.The results show that the DRX plays a vital role in grain refinement in hot deformation.Large strain,high temperature andsmall strain rate are beneficial to grain refinement.The stable size of recrystallized grain is not concerned with initial grain size,butdepends on strain rate and temperature.Kinetic characteristic of DRX process was analyzed.By comparison of simulated andexperimental flow stress–strain curves and metallographs,it is found that the established CA models can accurately predict themicrostructure evolution of7055aluminum alloy during hot compressive deformation.展开更多
基金supported by the National Natural Science Foundation of China (No. 51975596)the Fundamental Research Funds for the Central Universities of Central South University, China (No. CX20220285)。
基金Projects(U1637601,51405520,51327902) supported by the National Natural Science Foundation of ChinaProject(ZZYJKT2017-06) supported by State Key Laboratory of High Performance Complex Manufacturing of Central South University,China
文摘To investigate the flow behavior of 2219 Al alloy during warm deformation, the thermal compression test was conducted in the temperature range of 483-573 K and the strain rate range of 0.001-5 s^-1 on a Gleeble-3500 thermomechanical simulation unit. The true stress-true strain curves obtained showed that the flow stress increased with the decrease in temperature and/or the increase in strain rate and the softening mechanism primarily proceeded via dynamic recovery. The modification on the conventional Arrhenius-type constitutive model approach was made, the material variables and activation energy were determined to be dependent on the deformation parameters. The modified flow stresses were found to be in close agreement with the experimental values. Furthermore, the activation energy obtained under different deformation conditions showed that it decreased with the rise in temperature and/or strain rate, and was also affected by the coupled effect of strain and strain rate.
基金financial supports from the National Natural Science Foundation of China(Nos.51705248,52005517)the State Key Laboratory for High-Performance Complex Manufacturing,Central South University,China(No.ZZYJKT2021-05)+1 种基金Key Research and Development Plan of Heilongjiang Province,China(No.GA21D003)the Natural Science Foundation of Hunan Province,China(No.2020JJ4703)。
基金Projects(51175257,51405520) supported by the National Natural Science Foundation of China
文摘In order to simulate the microstructure evolution during hot compressive deformation,models of dynamic recrystallization(DRX)by cellular automaton(CA)method for7055aluminum alloy were established.The hot compression tests were conducted toobtain material constants,and models of dislocation density,nucleation rate and recrystallized grain growth were fitted by leastsquare method.The effects of strain,strain rate,deformation temperature and initial grain size on microstructure variation werestudied.The results show that the DRX plays a vital role in grain refinement in hot deformation.Large strain,high temperature andsmall strain rate are beneficial to grain refinement.The stable size of recrystallized grain is not concerned with initial grain size,butdepends on strain rate and temperature.Kinetic characteristic of DRX process was analyzed.By comparison of simulated andexperimental flow stress–strain curves and metallographs,it is found that the established CA models can accurately predict themicrostructure evolution of7055aluminum alloy during hot compressive deformation.
