All-fiber, wavelength-tunable ultrafast praseodymium fiber laser

The interest in tunable ultrafast fiber lasers operating in the 1.3 μm region has seen a significant increase due to rising demands for bandwidth as well as the zero-dispersion characteristic of silica fibers in this wavelength region. In this work, a tunable mode-locked praseodymium-doped fluoride fiber(PDFF) laser using single-walled carbon nanotubes as a saturable absorber is demonstrated. The mode-locked pulses are generated at a central wavelength of 1302 nm with a pulse repetition rate of 5.92 MHz and pulse width of 1.13 ps. The tunability of the mode-locked PDFF laser covers a tuning range of 11 nm.

Tunable passively Q-switched ytterbium-doped fiber laser with mechanically exfoliated GaSe saturable absorber

A tunable passively Q-switched ytterbium-doped fiber laser using few-layer gallium selenide（GaSe） as a saturable absorber（SA） is demonstrated.The few-layer GaSe SA,which is fabricated by the mechanical exfoliation method,is able to generate a Q-switched fiber laser that has a maximum repetition rate of 92.6 kHz and a minimum pulsed width of 2.3 μs.The highest pulse energy exhibited by the generated pulse is 18.8 nJ with a signal to noise ratio of ~40 dB.The tunability of the proposed laser covers from 1042 to 1082 nm,giving a tuning range of 40 nm.

Sideband-controllable soliton pulse with bismuth-based erbium-doped fiber

A sideband-controllable soliton mode-locked erbium-doped fiber laser is successfully demonstrated utilizing the nonlinear polarization rotation technique. The sidebands can be produced or suppressed by performing simple polarization light tuning with a polarization controller. It is believed that the elimination of the sidebands is due to the dispersive waves that are filtered out by the polarization-dependent isolator in the resonator. With the elimination of the Kelly sidebands, the obtained 3 d B bandwidth is 10.6 nm and the attainable pulse duration is0.86 ps. In this experiment, it is proven that the existence of Kelly sidebands limits the attainable pulse duration.

Passive Q-switching in an erbium-doped fiber laser using tungsten sulphoselenide as a saturable absorber

A highly stable Q-switched laser incorporating a mechanically exfoliated tungsten sulphoselenide （WSSe） thin sheet saturable absorber （SA） is proposed and demonstrated. The SA assembly, formed by sandwiching a thin WSSe sheet between two fiber ferrules within the erbium-doped fiber laser, is used to effectively modulate the laser cavity losses. The WSSe-based SA has a saturation intensity of ~0.006 MW∕cm^2 and a modulation depth of 7.8%, giving an optimum Q-switched laser output with a maximum repetition rate of 61.81 kHz and a minimum pulse width of 2.6 μs. The laser＇s highest output power of 0.45 mW and highest pulse energy of 7.31 nJ are achieved at the maximum pump power of 280.5 mW. The tunability of the cavity＇s output at the maximum pump power is analyzed with a C-band tunable bandpass filter, giving a broad tunable range of ~40 nm, from 1530 nm to 1570 nm. The output performance of the tunable Q-switched laser correlates well with the gain spectrum of erbium-doped fibers, with the shift in the gain profile as a result of the saturated SA.