The quantum entangled photon-pair source,as an essential component of optical quantum systems,holds great potential for applications such as quantum teleportation,quan-tum computing,and quantum imaging.The current wor...The quantum entangled photon-pair source,as an essential component of optical quantum systems,holds great potential for applications such as quantum teleportation,quan-tum computing,and quantum imaging.The current workhorse technique for preparing photon pairs involves performing spon-taneous parametric down conversion(SPDC)in bulk nonlinear crystals.However,the current power consumption and cost of preparing entangled photon-pair sources are relatively high,pos-ing challenges to their integration and scalability.In this paper,we propose a low-power system model for the quantum entan-gled photon-pair source based on SPDC theory and phase matching technology.This model allows us to analyze the per-formance of each module and the influence of component cha-racteristics on the overall system.In our experimental setup,we utilize a 5 mW laser diode and a typical type-II barium metabo-rate(BBO)crystal to prepare an entangled photon-pair source.The experimental results are in excellent agreement with the model,indicating a significant step towards achieving the goal of low-power and low-cost entangled photon-pair sources.This achievement not only contributes to the practical application of quantum entanglement lighting,but also paves the way for the widespread adoption of optical quantum systems in the future.展开更多
为了研究高温空气下C/SiC复合材料断裂韧性和微观结构,采用单边切口梁三点弯曲法实时测试了C/SiC复合材料在高温空气下的断裂韧性,并采用电子扫描显微镜(scanning electron microscope,SEM)和X射线衍射分析仪(X-ray diffraction,XRD)分...为了研究高温空气下C/SiC复合材料断裂韧性和微观结构,采用单边切口梁三点弯曲法实时测试了C/SiC复合材料在高温空气下的断裂韧性,并采用电子扫描显微镜(scanning electron microscope,SEM)和X射线衍射分析仪(X-ray diffraction,XRD)分析了复合材料在不同温度下的破坏断口和失效机制。研究结果表明随测试温度升高,C/SiC复合材料断裂韧性降低,材料的断裂形式由脆性断裂逐渐演变成塑性断裂。从室温升温到1000℃测试温度条件下,C/SiC复合材料的断裂韧性由12.5 MPa·m^(1/2)降低为10.96 MPa·m^(1/2),降幅仅为12%,C/SiC复合材料高温断裂韧性良好。不同温度下,材料呈现出不同形式的断裂形貌。常温下断口形貌主要可以看到纤维拔出的现象,随着温度的升高,该现象基本消失,断裂截面变得更平整,材料的强度主要取决于基体的强度。展开更多
文摘The quantum entangled photon-pair source,as an essential component of optical quantum systems,holds great potential for applications such as quantum teleportation,quan-tum computing,and quantum imaging.The current workhorse technique for preparing photon pairs involves performing spon-taneous parametric down conversion(SPDC)in bulk nonlinear crystals.However,the current power consumption and cost of preparing entangled photon-pair sources are relatively high,pos-ing challenges to their integration and scalability.In this paper,we propose a low-power system model for the quantum entan-gled photon-pair source based on SPDC theory and phase matching technology.This model allows us to analyze the per-formance of each module and the influence of component cha-racteristics on the overall system.In our experimental setup,we utilize a 5 mW laser diode and a typical type-II barium metabo-rate(BBO)crystal to prepare an entangled photon-pair source.The experimental results are in excellent agreement with the model,indicating a significant step towards achieving the goal of low-power and low-cost entangled photon-pair sources.This achievement not only contributes to the practical application of quantum entanglement lighting,but also paves the way for the widespread adoption of optical quantum systems in the future.