Deepwater/deep-marine turbidite lobes are the most distal part of a siliciclastic depositional system and hold the largest sediment accumulation on the seafloor. As many giant hydrocarbon provinces have been discovere...Deepwater/deep-marine turbidite lobes are the most distal part of a siliciclastic depositional system and hold the largest sediment accumulation on the seafloor. As many giant hydrocarbon provinces have been discovered within deepwater lobe deposits, they represent one of the most promising exploration targets for hydrocarbon industry. Deepwater exploration is characterized by high cost, high risk but insufficient data because of the deep/ultra–deepwater depth. A thorough understanding of the deepwater turbidite lobe architecture, hierarchy, stacking pattern and internal facies distribution is thus vital. Recently, detailed outcrop characterizations and high–resolution seismic studies have both revealed that the deepwater lobe deposits are characterized into four–fold hierarchical arrangements from ＂beds＂, to ＂lobe elements＂, to ＂lobes＂ and to ＂lobe complex＂. Quantitative compilations have shown that hierarchical components of lobe deposits have similar length to width ratios but different width to thickness ratios depending on different turbidite systems. At all hierarchical scales, sand–prone hierarchical lobe units are always separated by mud–prone bounding units except when the bounding units are eroded by their overlying lobe units thus giving rise to vertical amalgamation and connectivity. Amalgamations often occur at more proximal regions suggesting high flow energy. A mixed flow behavior may occur towards more distal regions, resulting in deposition of ＂hybrid event beds＂. These synthesized findings could（1） help understand the lobe reservoir distribution and compartmentalization therefore benefit the exploration and development of turbidite lobes within the deep marine basins（e.g. South China Sea） and（2） provide rules and quantitative constraints on reservoir modeling. In addition, the findings associated with deepwater turbidite lobes might be a good starting point to understand the sedimentology, architecture and hierarchy of turbidites in deep lacustrine environment.展开更多
The shales in the 2nd Member of Shanxi formation in the east margin of the Ordos Basin were deposited in a marine-nonmarine transitional environment during the Permian.Based on the recent breakthroughs in the shale ga...The shales in the 2nd Member of Shanxi formation in the east margin of the Ordos Basin were deposited in a marine-nonmarine transitional environment during the Permian.Based on the recent breakthroughs in the shale gas exploration and theoretical understandings on the shale gas of the study area,with a comparison to marine shale gas in the Sichuan Basin and marine-nonmarine transitional shale gas in the U.S.,this study presents the geological characteristics and development potential of marine-nonmarine transitional gas in the study area.Four geological features are identified in the 2nd Member of the Shanxi Formation in the study area has:(1)stable sedimentary environment is conductive to deposition of widely distributed organic shale;(2)well-developed micro-and nanoscale pore and fracture systems,providing good storage capacity;(3)high content of brittle minerals such as quartz,leading to effectively reservoir fracturing;and(4)moderate reservoir pressure and relatively high gas content,allowing efficient development of shale gas.The 2nd Member of Shanxi Formation in the east margin of Ordos Basin is rich in shale gas resource.Three favorable zones,Yulin-Linxian,Shiloubei-Daning-Jixian,and Hancheng-Huangling are developed,with a total area of 1.28×104 km2 and resources between 1.8×1012 and 2.9×1012m3,indicating a huge exploration potential.Tests of the 2nd Member of Shanxi Formation in vertical wells show that the favorable intervals have stable gas production and high reserves controlled by single well,good recoverability and fracability.This shale interval has sufficient energy,stable production capacity,and good development prospects,as evidenced by systematic well testing.The east margin of the Ordos Basin has several shale intervals in the Shanxi and Taiyuan formations,and several coal seams interbedded,so collaborative production of different types of natural gas in different intervals can be considered.The study results can provide reference for shale gas exploration and development and promote the rapid exploitation of shale gas in China.展开更多
Based on anatomy of key areas and data points and analysis of typical features of shell layer in Guanyinqiao Member, basic characteristics of key interfaces, mainly bentonite layers, in the Upper Ordovician Wufeng For...Based on anatomy of key areas and data points and analysis of typical features of shell layer in Guanyinqiao Member, basic characteristics of key interfaces, mainly bentonite layers, in the Upper Ordovician Wufeng Formation-Lower Silurian Longmaxi Formation in the Sichuan Basin and its surrounding areas and the relationship between these key interfaces with the deposition of organic-rich shale have been examined systematically. The Wufeng Formation-Longmaxi Formation has four types of marker beds with interface attributes, namely, the characteristic graptolite belt, Guanyinqiao Member shell layer, section with dense bentonite layers, and concretion section, which can be taken as key interfaces for stratigraphic division and correlation of the graptolite shale. The shell layer in Guanyinqiao Member is the most standard key interface in Wufeng Formation-Longmaxi Formation, and can also be regarded as an important indicator for judging the depositional scale of organic-rich shale in key areas. There are 8 dense bentonite sections of two types mainly occurring in 7 graptolite belts in these formations. They have similar interface characteristics with the shell layer in Guanyinqiao Member in thickness and natural gamma response, and belong to tectonic interfaces(i.e., event deposits). They have three kinds of distribution scales: whole region, large part of the region, and local part, and can be the third, fourth and fifth order sequence interfaces, and have a differential control effect on organic-rich shale deposits. The horizon the characteristic graptolite belt occurs first is the isochronous interface, which is not directly related to the deposition of organic-rich shale. Concretions only appear in local areas, and show poor stability in vertical and horizontal directions, and have no obvious relationship with the deposition of the organic-rich shale.展开更多
Through lithofacies analysis and architecture anatomy of the Carboniferous Ross Sandstone turbidites outcropped at western Ireland,the depositional model of deepwater turbidite lobes is established.Seven types of lith...Through lithofacies analysis and architecture anatomy of the Carboniferous Ross Sandstone turbidites outcropped at western Ireland,the depositional model of deepwater turbidite lobes is established.Seven types of lithofacies are recognized including goniatites-rich shale,laminated shale,laminated siltstone,massive sandstone,fine-medium sandstone with mud-clast,basal gravel,and chaotic mudstone,which can be subdivided into units of three origins,turbidite lobe,turbidite channel,and slide-slump;and four hierarchical levels,lobe complex,lobe,lobe element and single sandstone layer.The lobes show apparent compensational stacking pattern,lobe elements display typical thickening-upward cycles on vertical profile,and the higher the hierarchical level,the better the preservation of the hierarchical boundary is.In general,turbidite lobe deposits appear as tabular,parallel/sub-parallel sandstone and mudstone interbeds,and change from thick,massive sandstone in the proximal end to thinner sandstone and mudstone interbeds from axis to fringe,with the sand-shale ratio and degree of sandstone amalgamation decreasing.展开更多
基金funded by China Postdoctoral Science Foundation (Grant No.2016M591016)
文摘Deepwater/deep-marine turbidite lobes are the most distal part of a siliciclastic depositional system and hold the largest sediment accumulation on the seafloor. As many giant hydrocarbon provinces have been discovered within deepwater lobe deposits, they represent one of the most promising exploration targets for hydrocarbon industry. Deepwater exploration is characterized by high cost, high risk but insufficient data because of the deep/ultra–deepwater depth. A thorough understanding of the deepwater turbidite lobe architecture, hierarchy, stacking pattern and internal facies distribution is thus vital. Recently, detailed outcrop characterizations and high–resolution seismic studies have both revealed that the deepwater lobe deposits are characterized into four–fold hierarchical arrangements from ＂beds＂, to ＂lobe elements＂, to ＂lobes＂ and to ＂lobe complex＂. Quantitative compilations have shown that hierarchical components of lobe deposits have similar length to width ratios but different width to thickness ratios depending on different turbidite systems. At all hierarchical scales, sand–prone hierarchical lobe units are always separated by mud–prone bounding units except when the bounding units are eroded by their overlying lobe units thus giving rise to vertical amalgamation and connectivity. Amalgamations often occur at more proximal regions suggesting high flow energy. A mixed flow behavior may occur towards more distal regions, resulting in deposition of ＂hybrid event beds＂. These synthesized findings could（1） help understand the lobe reservoir distribution and compartmentalization therefore benefit the exploration and development of turbidite lobes within the deep marine basins（e.g. South China Sea） and（2） provide rules and quantitative constraints on reservoir modeling. In addition, the findings associated with deepwater turbidite lobes might be a good starting point to understand the sedimentology, architecture and hierarchy of turbidites in deep lacustrine environment.
基金Supported by the China National Science and Technology Major Project(2017ZX05035,2016ZX05041)
文摘The shales in the 2nd Member of Shanxi formation in the east margin of the Ordos Basin were deposited in a marine-nonmarine transitional environment during the Permian.Based on the recent breakthroughs in the shale gas exploration and theoretical understandings on the shale gas of the study area,with a comparison to marine shale gas in the Sichuan Basin and marine-nonmarine transitional shale gas in the U.S.,this study presents the geological characteristics and development potential of marine-nonmarine transitional gas in the study area.Four geological features are identified in the 2nd Member of the Shanxi Formation in the study area has:(1)stable sedimentary environment is conductive to deposition of widely distributed organic shale;(2)well-developed micro-and nanoscale pore and fracture systems,providing good storage capacity;(3)high content of brittle minerals such as quartz,leading to effectively reservoir fracturing;and(4)moderate reservoir pressure and relatively high gas content,allowing efficient development of shale gas.The 2nd Member of Shanxi Formation in the east margin of Ordos Basin is rich in shale gas resource.Three favorable zones,Yulin-Linxian,Shiloubei-Daning-Jixian,and Hancheng-Huangling are developed,with a total area of 1.28×104 km2 and resources between 1.8×1012 and 2.9×1012m3,indicating a huge exploration potential.Tests of the 2nd Member of Shanxi Formation in vertical wells show that the favorable intervals have stable gas production and high reserves controlled by single well,good recoverability and fracability.This shale interval has sufficient energy,stable production capacity,and good development prospects,as evidenced by systematic well testing.The east margin of the Ordos Basin has several shale intervals in the Shanxi and Taiyuan formations,and several coal seams interbedded,so collaborative production of different types of natural gas in different intervals can be considered.The study results can provide reference for shale gas exploration and development and promote the rapid exploitation of shale gas in China.
基金Supported by the PetroChina Science and Technology Project(2021DJ1904)PetroChina Exploration and Production Company Marine Shale Gas Selection Project(kt2018-01-06)。
文摘Based on anatomy of key areas and data points and analysis of typical features of shell layer in Guanyinqiao Member, basic characteristics of key interfaces, mainly bentonite layers, in the Upper Ordovician Wufeng Formation-Lower Silurian Longmaxi Formation in the Sichuan Basin and its surrounding areas and the relationship between these key interfaces with the deposition of organic-rich shale have been examined systematically. The Wufeng Formation-Longmaxi Formation has four types of marker beds with interface attributes, namely, the characteristic graptolite belt, Guanyinqiao Member shell layer, section with dense bentonite layers, and concretion section, which can be taken as key interfaces for stratigraphic division and correlation of the graptolite shale. The shell layer in Guanyinqiao Member is the most standard key interface in Wufeng Formation-Longmaxi Formation, and can also be regarded as an important indicator for judging the depositional scale of organic-rich shale in key areas. There are 8 dense bentonite sections of two types mainly occurring in 7 graptolite belts in these formations. They have similar interface characteristics with the shell layer in Guanyinqiao Member in thickness and natural gamma response, and belong to tectonic interfaces(i.e., event deposits). They have three kinds of distribution scales: whole region, large part of the region, and local part, and can be the third, fourth and fifth order sequence interfaces, and have a differential control effect on organic-rich shale deposits. The horizon the characteristic graptolite belt occurs first is the isochronous interface, which is not directly related to the deposition of organic-rich shale. Concretions only appear in local areas, and show poor stability in vertical and horizontal directions, and have no obvious relationship with the deposition of the organic-rich shale.
基金Supported by the China National Science and Technology Major Project(2017ZX05035)
文摘Through lithofacies analysis and architecture anatomy of the Carboniferous Ross Sandstone turbidites outcropped at western Ireland,the depositional model of deepwater turbidite lobes is established.Seven types of lithofacies are recognized including goniatites-rich shale,laminated shale,laminated siltstone,massive sandstone,fine-medium sandstone with mud-clast,basal gravel,and chaotic mudstone,which can be subdivided into units of three origins,turbidite lobe,turbidite channel,and slide-slump;and four hierarchical levels,lobe complex,lobe,lobe element and single sandstone layer.The lobes show apparent compensational stacking pattern,lobe elements display typical thickening-upward cycles on vertical profile,and the higher the hierarchical level,the better the preservation of the hierarchical boundary is.In general,turbidite lobe deposits appear as tabular,parallel/sub-parallel sandstone and mudstone interbeds,and change from thick,massive sandstone in the proximal end to thinner sandstone and mudstone interbeds from axis to fringe,with the sand-shale ratio and degree of sandstone amalgamation decreasing.
