SiC_w/Al composite was fabricated through a squeeze cast route and coldrolled to about 30 percent, 50 percent and 70 percent reduction In thickness, respectively. Thelength of whiskers in the composite before and afte...SiC_w/Al composite was fabricated through a squeeze cast route and coldrolled to about 30 percent, 50 percent and 70 percent reduction In thickness, respectively. Thelength of whiskers in the composite before and after rolling was examined using SEM. Some of therolled composites were recrystallization annealed to remove the work hardening of matrix alloy. Thetensile strength of the rolled and annealed SiC_w/Al composites was examined and then associatedwith the change of the whisker length and the work hardening of matrix alloy. It was found that thetensile strength is a function of the degree of cold rolling. For the cold rolled composites, withthe increase in the degree of cold rolling, the tensile strength increases at first, and decreaseswhen the degree of cold rolling exceeds 50 percent. For the annealed ones, however; the tensilestrength decreases monotonously with the increase in rolling degree. The different changes intensile strength between the rolled and annealed composites could be attributed to the result of thecompetition between the work hardening of matrix resulting from the cold rolling and the worksoftening arising from the change of whisker length.展开更多
基金This work is financially supported by the National Natural Science Foundation if China(No.50071031)
文摘SiC_w/Al composite was fabricated through a squeeze cast route and coldrolled to about 30 percent, 50 percent and 70 percent reduction In thickness, respectively. Thelength of whiskers in the composite before and after rolling was examined using SEM. Some of therolled composites were recrystallization annealed to remove the work hardening of matrix alloy. Thetensile strength of the rolled and annealed SiC_w/Al composites was examined and then associatedwith the change of the whisker length and the work hardening of matrix alloy. It was found that thetensile strength is a function of the degree of cold rolling. For the cold rolled composites, withthe increase in the degree of cold rolling, the tensile strength increases at first, and decreaseswhen the degree of cold rolling exceeds 50 percent. For the annealed ones, however; the tensilestrength decreases monotonously with the increase in rolling degree. The different changes intensile strength between the rolled and annealed composites could be attributed to the result of thecompetition between the work hardening of matrix resulting from the cold rolling and the worksoftening arising from the change of whisker length.
