Three magnitude 〉6 earthquakes struck Qaidam, Qinghai province, China, in November 10th 2008, August 28th and 31st 2009 respectively. The Zongwulongshan fault has often been designated as the active seismogenic struc...Three magnitude 〉6 earthquakes struck Qaidam, Qinghai province, China, in November 10th 2008, August 28th and 31st 2009 respectively. The Zongwulongshan fault has often been designated as the active seismogenic structure, although it is at odd with the data. Our continuous GPS station （CGPS）, the Xiao Qaidam station, located in the north of the Qaidam basin, is less than 30 km to the southwest of the 2008 earthquake. This CGPS station recorded the near field co-seismic deformation. Here we analyzed the co-seismic dislocation based on the GPS time series and the rupture processes from focal mechanism for the three earthquakes. The afiershocks were relocated to constrain the spatial characteristics of the 2008 and 2009 Qaidam earthquakes. Field geological and geomorphological investigation and interpretation of satellite images show that the Xitieshan fault and Zongwulongshan fault were activated as left lateral thrust during the late Quaternary. Evidence of folding can also be identified. Integrated analyses based on our data and the regional tectonic environment show that the Xitieshan fault is the fault responsible for the 2008 Qaidam earthquake, which is a low dip angle thrust with left lateral strike slip. The Zongwulongshan fault is the seismogenic fault of the 2009 earthquakes, which is a south dipping back thrust of the northern marginal thrust system of the Qaidam basin. Folding takes a significant part of the deformation in the northern marginal thrust system of the Qaidam basin, dominating the contemporary structure style of the northern margin of the Qaidam basin and Qilianshan tectonic system. In this region, this fault and fold system dominates the earthquake activities with frequent small magnitude earthquakes.展开更多
Western Sichuan and its vicinity are located in the juncture of three big active blocks, namely, the Chuandian (Sichuan and Yunnan), the Bayan Har and the South China blocks, on the eastern margin of the Qinghai-Xizan...Western Sichuan and its vicinity are located in the juncture of three big active blocks, namely, the Chuandian (Sichuan and Yunnan), the Bayan Har and the South China blocks, on the eastern margin of the Qinghai-Xizang(Tibet) Plateau. Many groups of active faults that are capable of generating earthquakes are developed there. Because there exist lateral secondary active faults, the Chuandian block can be further divided into the central Yunnan and northwestern Sichuan sub_blocks; while the Longmenshan sub_block can be divided on the east end of the Bayan Har block. Joint exploration of deep crustal structure shows that there exist low-velocity and high-conductivity layers in the crust of the Chuandian and Bayan Har blocks, which are one of the important factors that make the upper crust prone to earthquake. The results of geological study and modern GPS observation show that blocks of different orders all have SE-or SSE-trending sliding, clockwise rotation and upwelling movement; but there are some differences in amplitude. This paper has also given the geological or GPS slip rates of main active fault zones and discussed the main scientific problems still existing now.展开更多
The May 12, 2008, Ms8.0 Wenchuan earthquake was the outcome of a recent movement of an active intra-continental thrust fault zone. The seismogenic fault of this earthquake underwent oblique-slip faulting along the cen...The May 12, 2008, Ms8.0 Wenchuan earthquake was the outcome of a recent movement of an active intra-continental thrust fault zone. The seismogenic fault of this earthquake underwent oblique-slip faulting along the central fault and pure thrust faulting along the range-front fault of the Longmenshan fault zone. The former had a steep dip and large vertical displacement, and the latter had a gentle dip and little vertical displacement. The fault zone consisted of compressive double fault ramps rup turing with right-lateral strike-slip components resulting from strain partitioning of a deep oblique slip fault in the brittle zone of the upper crust. The kinematic pattern and rupture mechanisms are complex for the seismogenic fault, as indicated by the geometric pattern of its surface ruptures, the coseismic displacement distribution and focal mechanisms of the main shock and aftershocks. As a tear fault, the NW-trending, left-lateral, strike-slip Xiaoyudong fault zone has accommodated NE-trending displacements with different shortening amounts. However, because of intense compression on the southwestern segment of the seismogenic fault, the left-lateral, strike-slip Xiaoyudong fault also carries a clear compression component. Normal faulting with a strike-slip component controls the formation of a fault-trough along the central fault, which is characterized by thrusting with a strike-slip component and strike-slip with thrusting. The fault-troughs are the product of the interaction of slip and grav ity on the seismogenic fault under specific geological and geomorphic conditions. Gravitational force exaggerated the vertical component of fault displacement, which by no means represents the actual maximum vertical displacement of the seismogenic fault.展开更多
基金financially supported by National Natural Science Foundation of China (No. 40802052)Part of the installation of the CGPS network was funded through a cooperation between the CEA and the French ANR funding agency (N° ANR-05-CATT-006)
文摘Three magnitude 〉6 earthquakes struck Qaidam, Qinghai province, China, in November 10th 2008, August 28th and 31st 2009 respectively. The Zongwulongshan fault has often been designated as the active seismogenic structure, although it is at odd with the data. Our continuous GPS station （CGPS）, the Xiao Qaidam station, located in the north of the Qaidam basin, is less than 30 km to the southwest of the 2008 earthquake. This CGPS station recorded the near field co-seismic deformation. Here we analyzed the co-seismic dislocation based on the GPS time series and the rupture processes from focal mechanism for the three earthquakes. The afiershocks were relocated to constrain the spatial characteristics of the 2008 and 2009 Qaidam earthquakes. Field geological and geomorphological investigation and interpretation of satellite images show that the Xitieshan fault and Zongwulongshan fault were activated as left lateral thrust during the late Quaternary. Evidence of folding can also be identified. Integrated analyses based on our data and the regional tectonic environment show that the Xitieshan fault is the fault responsible for the 2008 Qaidam earthquake, which is a low dip angle thrust with left lateral strike slip. The Zongwulongshan fault is the seismogenic fault of the 2009 earthquakes, which is a south dipping back thrust of the northern marginal thrust system of the Qaidam basin. Folding takes a significant part of the deformation in the northern marginal thrust system of the Qaidam basin, dominating the contemporary structure style of the northern margin of the Qaidam basin and Qilianshan tectonic system. In this region, this fault and fold system dominates the earthquake activities with frequent small magnitude earthquakes.
文摘Western Sichuan and its vicinity are located in the juncture of three big active blocks, namely, the Chuandian (Sichuan and Yunnan), the Bayan Har and the South China blocks, on the eastern margin of the Qinghai-Xizang(Tibet) Plateau. Many groups of active faults that are capable of generating earthquakes are developed there. Because there exist lateral secondary active faults, the Chuandian block can be further divided into the central Yunnan and northwestern Sichuan sub_blocks; while the Longmenshan sub_block can be divided on the east end of the Bayan Har block. Joint exploration of deep crustal structure shows that there exist low-velocity and high-conductivity layers in the crust of the Chuandian and Bayan Har blocks, which are one of the important factors that make the upper crust prone to earthquake. The results of geological study and modern GPS observation show that blocks of different orders all have SE-or SSE-trending sliding, clockwise rotation and upwelling movement; but there are some differences in amplitude. This paper has also given the geological or GPS slip rates of main active fault zones and discussed the main scientific problems still existing now.
基金supported by Wenchuan Fault Scientific Drilling Program
文摘The May 12, 2008, Ms8.0 Wenchuan earthquake was the outcome of a recent movement of an active intra-continental thrust fault zone. The seismogenic fault of this earthquake underwent oblique-slip faulting along the central fault and pure thrust faulting along the range-front fault of the Longmenshan fault zone. The former had a steep dip and large vertical displacement, and the latter had a gentle dip and little vertical displacement. The fault zone consisted of compressive double fault ramps rup turing with right-lateral strike-slip components resulting from strain partitioning of a deep oblique slip fault in the brittle zone of the upper crust. The kinematic pattern and rupture mechanisms are complex for the seismogenic fault, as indicated by the geometric pattern of its surface ruptures, the coseismic displacement distribution and focal mechanisms of the main shock and aftershocks. As a tear fault, the NW-trending, left-lateral, strike-slip Xiaoyudong fault zone has accommodated NE-trending displacements with different shortening amounts. However, because of intense compression on the southwestern segment of the seismogenic fault, the left-lateral, strike-slip Xiaoyudong fault also carries a clear compression component. Normal faulting with a strike-slip component controls the formation of a fault-trough along the central fault, which is characterized by thrusting with a strike-slip component and strike-slip with thrusting. The fault-troughs are the product of the interaction of slip and grav ity on the seismogenic fault under specific geological and geomorphic conditions. Gravitational force exaggerated the vertical component of fault displacement, which by no means represents the actual maximum vertical displacement of the seismogenic fault.
