The effect of deep cryogenic cycle treatment(DCT)on Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5)(Vit-1)bulk metallic glass(BMG)prepared from high-purity raw materials was investigated.After DCT,no obvious rejuvenation ...The effect of deep cryogenic cycle treatment(DCT)on Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5)(Vit-1)bulk metallic glass(BMG)prepared from high-purity raw materials was investigated.After DCT,no obvious rejuvenation of the samples was detected.With an increasing number of cryogenic cycles,the hardness of the samples first decreased and then increased,the room-temperature compression plasticity first increased and then generally remained unchanged,and the impact toughness underwent almost no obvious change.The absence of rejuvenation was attributed to the high fragility index(47-50)and high glass forming ability(GFA)of the material.As lower purity of the raw materials is expected in practical applications,DCT of Vit-1 BMG prepared from low-purity raw materials was also performed.After DCT,the samples prepared with the lower-purity raw materials were clearly rejuvenated,and the room-temperature mechanical properties improved significantly.Both the compression plasticity and impact toughness reached peak values after 5 cryogenic cycles.The initial impurities(including Y and O)had a complex and comprehensive effect on the deformation mechanism of the BMG during DCT.Our findings indicate that the structural heterogeneity,fragility index,and GFA of the BMG alter the effect of DCT.展开更多
基金financially supported by the National Science Foundation for Distinguished Young Scholars of China(Grant No.51725504)the open funding via State Key Laboratory of Materials Processing and Die&Mould Technology(Grant No.P2019-011)+1 种基金the Guangdong Provincial Natural Science Foundation of China(Grant No.2020A1515011524)the Fundamental Research Funds for the Central Universities,HUST(Grant No.2018KFYRCPT001).
文摘The effect of deep cryogenic cycle treatment(DCT)on Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5)(Vit-1)bulk metallic glass(BMG)prepared from high-purity raw materials was investigated.After DCT,no obvious rejuvenation of the samples was detected.With an increasing number of cryogenic cycles,the hardness of the samples first decreased and then increased,the room-temperature compression plasticity first increased and then generally remained unchanged,and the impact toughness underwent almost no obvious change.The absence of rejuvenation was attributed to the high fragility index(47-50)and high glass forming ability(GFA)of the material.As lower purity of the raw materials is expected in practical applications,DCT of Vit-1 BMG prepared from low-purity raw materials was also performed.After DCT,the samples prepared with the lower-purity raw materials were clearly rejuvenated,and the room-temperature mechanical properties improved significantly.Both the compression plasticity and impact toughness reached peak values after 5 cryogenic cycles.The initial impurities(including Y and O)had a complex and comprehensive effect on the deformation mechanism of the BMG during DCT.Our findings indicate that the structural heterogeneity,fragility index,and GFA of the BMG alter the effect of DCT.
