Extraction of Total Phenolic Compounds, Flavonoids, Anthocyanins and Tannins from Grape Byproducts by Response Surface Methodology. Influence of Solid-Liquid Ratio, Particle Size, Time, Temperature and Solvent Mixtures on the Optimization Process

The current work concerns the optimization process of phenolic compounds solid liquid extraction from grape byproducts at high temperatures and short incubation times. The effect of five experimental parameters (solidliquid ratio, particle size, time, temperature and solvent mixture) mostly believed to affect the extraction process was undertaken. A first response surface methodology experimental design was used to optimize the solid-liquid ratio and milling time parameters. A second design was used for the optimization of the quantitative and qualitative parameters. The quantitative parameters studied are: total phenolic compounds, flavonoid content, total monomeric anthocyanin composition and tannin concentration. The qualitative parameters analyzed are: antiradical activity and antioxidant capacity. The second design was based on the use of time, temperature and solvent mixture as optimization parameters. The assays were first conducted separately revealing the best experimental conditions for the maximization of each response variable alone. A simultaneous response surface methodology of all the responses taken together was then conducted, showing the optimal extraction conditions to be: 93 minutes at 94?C and in 66% ethanol/water solvent. The maximal response values obtained for each parameter are: Total Phenolic Compounds yield (5.5 g GAE/100g DM), Flavonoid Content (5.4 g GAE/100g DM), Total Monomeric Anthocyanin yield (70.3 mg/100g DM), Tannin Concentration (12.3 g/L), Antiradical Activity (67.3%) and Total Antioxidant Capacity (393 mgAAE/L). All of the optimal values were acquired at 3 mL/g solid-liquid ratio and 6.8 min milling time. The obtained extracts could be used as natural bioactive compounds in several industrial applications.

Multiple Response Optimization of High Temperature, Low Time Aqueous Extraction Process of Phenolic Compounds from Grape Byproducts

In this study phenolic compounds extraction from grape byproducts was conducted using pure water as a solvent. High temperatures and low time incubation periods were used in the aim of reducing the cost of the process and heightening the phenolic compounds yield. Response surface methodology (RSM) was realized to study the effect of time and temperature on crushed and uncrushed grape pomace. The phenolic content was evaluated considering the quantity (total phenolics (TPC), flavonoids (FC), total monomeric anthocyanins (TMA) and tannins (TC)), and quality (antiradical activity (AA) and antioxidant capacity (AC)) of the extracts. High temperature low time extraction design used in this study was compared to the extraction process at moderate temperatures with relatively long periods of time. This was proved to ameliorate the quantitative extraction of phenolic compounds from grape pomace without affecting their bioactivity. Moreover, multiple response optimization showed the optimal extraction parameters to be 81?C and 140 minutes for the unmilled pomace samples, and 88?C and 5 minutes for the milled. TPC, FC, TMA, TC, AA and AC are almost the same for both optimums. Thus the possibility of replacing the milling process by the extraction time prolongation (for the unmilled pomace) of 135 minutes seems to be very plausible. HPLC analysis showed different quantity and diversity of extracted phenolics for the optimums. However this difference did not significantly affect the overall activity, showing that PC in the different extracts act in complete synergy all together leading to important biological properties. The obtained results using the extraction strategy adopted in this work could lead to several industrial applications.