Research and development of prevention and control measures on the transmission of pathogens in compartments of passenger transport

Contagious pathogens like COVID-19 transmitted via respiratory droplets spread effortlessly in the passenger compartments of transport,significantly jeopardizing passengers’safety when taking public transportation.To date,studies on the fundamental theories of airborne droplet transmission and the engineering application of decontamination techniques are insufficient for the prevention and control of pathogens transmitting in the compartments of passenger transport.It is essential to systematically investigate the control approaches to restrain pathogens from transmitting in passenger compartments.Herein,a theoretical framework for calculating the transmission of pathogens in a complex compartment environment was proposed,and experimental platforms that satisfy the Biosafety Level-2 Laboratory safety level for compartment environment simulations were built based on a set of real train cabins.On these bases,numerical investigations on the motion of pathogen-laden droplets were conducted,and decontamination techniques were examined experimentally.Thereby,control measures on the pathogen transmission and pathogen decontamination schemes were proposed.Moreover,highly efficient decontamination devices were developed,and coping strategies for epidemic emergencies were devised.The outcomes provide theoretical and technical support for developing the next generation of transportation and the prevention and control measures cooperatively considering regular and pandemic times.

Structural optimization design of a bolster based on a simulation-driven design

A simulation-driven design method which uses multiple optimization methods can effectively promote innovative structural design tion analysis can enormously improve the efficiency of modelling and solving.This study establishes a general workflow of structural and reduce the product development cycle.Meanwhile,the sub-model technology which has more detailed simulation and optimizaoptimization for a stainless-steel metro bolster by combining the simulation-driven design method and sub-model technology.In the sub-model definition phase,the end underframe sub-model which contains the bolster is obtained based on the whole car body finite element(FE)model,and the effectiveness of the end underframe sub-model is also proved.In the conceptual design phase,the is determined according to manufacturing processes and design experiences.In the detailed design phase,the thickness of each topology path inside the bolster is obtained by the topology method and the optimized structure of the inner ribs inside the bolster part of the bolster is determined by size optimization.The simulation analyses indicate that the requirements of static strength and can be decreased by 17.79% compared with the original bolster structure,which means that not only the lightweight design goal fatigue strength are fulfilled by the optimized bolster structure.Besides,the weight can be reduced by 11.18% and the weld length is achicved.but also the welding auantity and manufacturing difficulty are geatly reduced.The results show the effectiveness of the simulation-driven design method based on the sub-model technology in the structural optimization for key parts of rail transit vehicles.

The influence of the leading-edge angle of subgrade on the aerodynamic loads of a high-speed train in a wind tunnel

The purpose of this study is to establish the correlation between the boundary layer over the subgrade and the aerodynamic loads act-ing on the train model in conventional wind tunnel tests.Firstly,flow characteristics around the subgrade with different leading-edge angles(15°,30°and 45°)are investigated through the particle image velocimetry(PIV)experimental test method.Then,wind tunnel tests of the aerodynamic performance of a high-speed train are carried out.The results are compared with previous experimental data obtained by moving model tests.Results show that,due to the presence of a boundary layer,the pressure acting on the lower part of the train head decreases,while other locations are not significantly affected.This is the reason for the reduction of the aerodynamic drag and lift on the train.In addition,the reduction effects become more obvious when the thickness of the boundary layer increases.The experimental results obtained could serve as a calibration of aerodynamic forces for wind tunnel tests on high-speed trains.