Ni0.4Zn0.6Fe2-xNdxO4（x = 0-0.07） ferrites doped with different amounts of Nd2O3 were prepared using standard ceramic technique. The samples were uniaxially pressed and sintered at 1250℃ for 4 h in air. The phase st...Ni0.4Zn0.6Fe2-xNdxO4（x = 0-0.07） ferrites doped with different amounts of Nd2O3 were prepared using standard ceramic technique. The samples were uniaxially pressed and sintered at 1250℃ for 4 h in air. The phase structure and microstructure of the samples were investigated using X-ray diffraction and scanning electron microscope, respectively. The complex permeability was measured using the impedance analyzer in the range of 1-100 MHz. The results indicate that with increasing Nd^3＋ content, the relative density and lattice parameter a of the sintered samples increase, whereas the real part of permeability （μ′） and the magnetic loss tangent （tan δ） decrease. The substitution of Nd^3＋ for Fe^3＋ forms a secondary phase on the grain boundary of the matrix, which strongly restrains the grain growth of the matrix.展开更多
The PrMg12-type composite alloy of PrMg_(11)Ni + x wt% Ni (x=100,200) with an amorphous and nanocrystalline microstructure were synthesized through the mechanical milling.Effects of milling duration and Ni content on ...The PrMg12-type composite alloy of PrMg_(11)Ni + x wt% Ni (x=100,200) with an amorphous and nanocrystalline microstructure were synthesized through the mechanical milling.Effects of milling duration and Ni content on the microstructures and electrochemical hydrogen storage performances of the ball-milled alloys were methodically studied.The ball-milled alloys obtain the optimum discharge capacities at the first cycle.Increasing Ni content dramatically enhances the electrochemical property of alloys.Milling time varying may obviously impact the electrochemical performance of these alloys.The discharge capacities show a significant upward trend with milling duration prolonging,but milling for a longer time more than 40 h induces a slight decrease in the discharge capacity of the x=200 alloy.As milling duration increases,the cycle stability clearly lowers,while it first declines and then augments under the same condition for the x=200 alloy.The high-rate discharge abilities of the ball-milled alloys show the optimum values with milling time varying.展开更多
文摘Ni0.4Zn0.6Fe2-xNdxO4（x = 0-0.07） ferrites doped with different amounts of Nd2O3 were prepared using standard ceramic technique. The samples were uniaxially pressed and sintered at 1250℃ for 4 h in air. The phase structure and microstructure of the samples were investigated using X-ray diffraction and scanning electron microscope, respectively. The complex permeability was measured using the impedance analyzer in the range of 1-100 MHz. The results indicate that with increasing Nd^3＋ content, the relative density and lattice parameter a of the sintered samples increase, whereas the real part of permeability （μ′） and the magnetic loss tangent （tan δ） decrease. The substitution of Nd^3＋ for Fe^3＋ forms a secondary phase on the grain boundary of the matrix, which strongly restrains the grain growth of the matrix.
基金Funded by National Natural Science Foundation of China(Nos.51871125,51901105 and 51761032)Inner Mongolia Natural Science Foundation(No.2019BS05005)。
文摘The PrMg12-type composite alloy of PrMg_(11)Ni + x wt% Ni (x=100,200) with an amorphous and nanocrystalline microstructure were synthesized through the mechanical milling.Effects of milling duration and Ni content on the microstructures and electrochemical hydrogen storage performances of the ball-milled alloys were methodically studied.The ball-milled alloys obtain the optimum discharge capacities at the first cycle.Increasing Ni content dramatically enhances the electrochemical property of alloys.Milling time varying may obviously impact the electrochemical performance of these alloys.The discharge capacities show a significant upward trend with milling duration prolonging,but milling for a longer time more than 40 h induces a slight decrease in the discharge capacity of the x=200 alloy.As milling duration increases,the cycle stability clearly lowers,while it first declines and then augments under the same condition for the x=200 alloy.The high-rate discharge abilities of the ball-milled alloys show the optimum values with milling time varying.
