期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
轨道车辆用异种奥氏体不锈钢激光搭接焊接头的晶间腐蚀行为 被引量:3
1
作者 赵瑞荣 杨志斌 +3 位作者 韩晓辉 王素环 杨蔚 史春元 《热加工工艺》 CSCD 北大核心 2018年第13期60-63,共4页
采用高功率光纤激光焊接设备对0.8 mm厚SUS301L-DLT和2.0 mm厚EN1.4318+2G奥氏体不锈钢板进行了激光搭接焊工艺试验,并对接头分别进行了草酸腐蚀、硝酸腐蚀和电化学腐蚀试验,分析了接头及其母材在不同腐蚀条件下的晶间腐蚀行为。结果表... 采用高功率光纤激光焊接设备对0.8 mm厚SUS301L-DLT和2.0 mm厚EN1.4318+2G奥氏体不锈钢板进行了激光搭接焊工艺试验,并对接头分别进行了草酸腐蚀、硝酸腐蚀和电化学腐蚀试验,分析了接头及其母材在不同腐蚀条件下的晶间腐蚀行为。结果表明,焊接接头及母材经过草酸溶液浸蚀后,其晶界组织均为第一类阶梯组织,而在硝酸溶液热浸蚀时,接头的腐蚀率高于其母材金属。在硫酸溶液腐蚀介质中,焊接接头及其母材的双环电化学动电位再活化(DL-EPR)曲线上均出现再活化峰,其中接头的再活化率值较母材大,表明奥氏体不锈钢激光搭接焊接头的抗晶间腐蚀性能下降。 展开更多
关键词 轨道车辆 奥氏体不锈钢 激光搭接焊 晶间腐蚀
下载PDF
EFFECTS OF In_2O_3 DOPING AND SINTERING TEMPERATURE ON THE ELECTRICAL PROPERTIES OF ZnO VARISTORS 被引量:2
2
作者 zhao ruirong Chen Jianxzen Jiang Hanying(Institute of Metallurgical Physicochemistry and Materials, Central SouthUniversity of Technology, Changsha 410083, China) 《Journal of Central South University》 SCIE EI CAS 1997年第1期13-15,共3页
ZnO varistors are prepared using the 0.1-0.3mm ZnO powders. The effects of the sintering temperature, contents of In2O3 doping on the non-linear properties of ZnO varistors have been investigated. Theresults show that... ZnO varistors are prepared using the 0.1-0.3mm ZnO powders. The effects of the sintering temperature, contents of In2O3 doping on the non-linear properties of ZnO varistors have been investigated. Theresults show that this kind of ZnO powder has a high sintering activity. It is suitable for making the low voltage varistors. The Vc decreases with the increase of sintered temperature, when the In2O3 content is fixed(0. 98 %, mass fraction), and increases with the increase of In2O3 contents when the temperature is steady. 展开更多
关键词 ZNO VARISTORS In2O3-doping SINTERING TEMPERATURE
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部