Removal of pathogenic indicator microorganisms during partial nitrification:the role of free nitrous acid

Digested wastewater contains pathogenic microorganisms and high ammonia concentrations,which can pose a potential risk to public health.Effective removal of pathogens and nitrogen is crucial for the post-treatment of digested wastewater.Partial nitrification-anammox is an energy-saving nitrogen removal process.Free nitrous acid(FNA),an intermediate product of partial nitrification,has the potential to inactivate microorganisms.However,the efficiency and mechanisms of FNA-related inactivation in pathogens during partial nitrification remains unclear.In this study,Enterococcus and Escherichia coli(E.coli)were selected to investigate the efficiency and mechanisms of FNA-related inactivation in partial nitrification process.The results revealed that 83%±13%and 59%±27%of E.coli and Enterococcus were removed,respectively,in partial nitrification process at FNA concentrations of 0.023−0.028 mg/L.When the concentration of FNA increased from 0 to 0.5 mg/L,the inactivation efficiencies of E.coli and Enterococcus increased from 0 to 99.9%and 89.9%,respectively.Enterococcus exhibited a higher resistance to FNA attack compared to E.coli.3D-laser scanning microscopy(3D-LSM)and scanning electron microscopy(SEM)revealed that FNA exposure caused the surface collapse of E.coli and Enterococcus,as well as visible pore formation on the surface of E.coli cells.4',6-Diamidino-2-phenylindole dihydrochloride n-hydrate(DAPI)/propidium iodide(PI)and biomolecule leakage confirmed that inactivation of E.coli and Enterococcus occurred due to breakdown of cell walls and cell membranes.These findings indicate that partial nitrification process can be used for the removal of residual pathogenic microorganisms.

Optimization of microwave pretreatment of lignocellulosic waste for enhancing methane production： Hyacinth as an example

The effect of microwave pretreatment on the anaerobic degradation of hyacinth was investigated using response surface methodology （RSM）. The components oflignin and the other constituents of hyacinth were altered by microwave pretreatment. Comparison of the near-infrared spectra of hyacinth pretreated by microwave irradiation and water-heating pretreatment revealed that no new compounds were generated during hyacinth pretreatment by microwave irradiation. Atomic force microscopy observations indicated that the physical structures of hyacinth were disrupted by microwave pretreatment. The yield of methane per gram of the microwave-irradiated substrate increased by 38.3% as compared to that of the substrate pretreated via water-heating. A maximum methane yield of 221 mL·g-sub^-1 was obtained under the optimum pretreatment conditions （substrate concentration （pSC） = 20.1 g·L^-1 and pretreatment time （PT） = 14.6 min） using RSM analysis. A maximum methane production rate of 0.76 mL·h^-1· g-sub^-1 was obtained by applying PSC = 9.5 g·L^-1 and PT= 11 min. Interactive item coefficient analysis showed that methane production was dependent on the PSC and PT, separately, whereas the interactive effect of the PSC and PT on methane production was not significant. The same trend was also observed for the methane production rate.