To study the hot deformation behavior of a new powder metallurgy nickel-based superalloy,hot compression tests were conducted in the temperature range of 1020−1110℃ with the strain rates of 0.001−1 s^−1.It is found t...To study the hot deformation behavior of a new powder metallurgy nickel-based superalloy,hot compression tests were conducted in the temperature range of 1020−1110℃ with the strain rates of 0.001−1 s^−1.It is found that the flow stress of the superalloy decreases with increasing temperature and decreasing strain rate.An accurate constitutive equation is established using a hyperbolic-sine type expression.Moreover,processing map of the alloy is constructed to optimize its hot forging parameters.Three domains of dynamic recrystallization stability and instability regions are identified from the processing map at a strain of 0.7,respectively.The adiabatic shear band,intergranular crack and a combination of intergranular crack and wedge crack are demonstrated to be responsible for the instabilities.Comprehensively analyzing the processing map and microstructure,the optimal isothermal forging conditions for the superalloy is determined to be t=1075−1105℃ andε&=10^−3−10−2.8 s^−1.展开更多
基金Project(2016YFB0700300)supported by the National Key Research and Development Program of ChinaProject(51774335)supported by the National Natural Science Foundation of China。
文摘To study the hot deformation behavior of a new powder metallurgy nickel-based superalloy,hot compression tests were conducted in the temperature range of 1020−1110℃ with the strain rates of 0.001−1 s^−1.It is found that the flow stress of the superalloy decreases with increasing temperature and decreasing strain rate.An accurate constitutive equation is established using a hyperbolic-sine type expression.Moreover,processing map of the alloy is constructed to optimize its hot forging parameters.Three domains of dynamic recrystallization stability and instability regions are identified from the processing map at a strain of 0.7,respectively.The adiabatic shear band,intergranular crack and a combination of intergranular crack and wedge crack are demonstrated to be responsible for the instabilities.Comprehensively analyzing the processing map and microstructure,the optimal isothermal forging conditions for the superalloy is determined to be t=1075−1105℃ andε&=10^−3−10−2.8 s^−1.
