The Solar Upper Transition Region Imager(SUTRI)Onboard the SATech-01 Satellite

The Solar Upper Transition Region Imager(SUTRI)onboard the Space Advanced Technology demonstration satellite(SATech-01),which was launched to a Sun-synchronous orbit at a height of~500 km in 2022 July,aims to test the on-orbit performance of our newly developed Sc/Si multi-layer reflecting mirror and the 2k×2k EUV CMOS imaging camera and to take full-disk solar images at the Ne VII 46.5 nm spectral line with a filter width of~3 nm.SUTRI employs a Ritchey-Chrétien optical system with an aperture of 18 cm.The on-orbit observations show that SUTRI images have a field of view of~416×416 and a moderate spatial resolution of~8″without an image stabilization system.The normal cadence of SUTRI images is 30 s and the solar observation time is about16 hr each day because the earth eclipse time accounts for about 1/3 of SATech-01's orbit period.Approximately15 GB data is acquired each day and made available online after processing.SUTRI images are valuable as the Ne VII 46.5 nm line is formed at a temperature regime of~0.5 MK in the solar atmosphere,which has rarely been sampled by existing solar imagers.SUTRI observations will establish connections between structures in the lower solar atmosphere and corona,and advance our understanding of various types of solar activity such as flares,filament eruptions,coronal jets and coronal mass ejections.

A New Post-hoc Flat Field Measurement Method for the Solar X-Ray and Extreme Ultraviolet Imager Onboard the FengYun-3E Satellite

Extreme ultraviolet(EUV)observations are widely used in solar activity research and space weather forecasting since they can observe both the solar eruptions and the source regions of the solar wind.Flat field processing is indispensable to remove the instrumental non-uniformity of a solar EUV imager in producing high-quality scientific data from original observed data.FengYun-3E(FY-3E)is a meteorological satellite operated in a Sunsynchronous orbit,and the routine EUV imaging data from the Solar X-ray and Extreme Ultraviolet Imager(X-EUVI)onboard FY-3E has the characteristic of concentric rotation.Taking advantage of the concentric rotation,we propose a post-hoc flat field measurement method for its EUV 195A channel in this paper.This method removes the small-scale and time-varying component of coronal activities by taking the median value for each pixel along the time axis of a concentric rotation data cube,and then derives the large-scale and invariable component of the quiet coronal radiation,and finally generates a flat field image.The flat field can be generated with cadences from hundreds of minutes(one orbit)to several days.Higher flat field accuracy can be achieved by employing more data.Further analysis shows that our method is able to measure the instrumental spot-like nonuniformity possibly caused by contamination on the detector,which mostly disappears after the in-orbit selfcleaning process.It can also measure the quasi-periodic grid-like non-uniformity,possibly from the obscuration of the support mesh on the rear filter.After flat field correction,these instrumental non-uniformities from the original data are effectively removed.Moreover,the X-EUVI 195A data after dark and flat field corrections are consistent with the 193A imaging data from the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory,verifying the suitability of the method.The post-hoc method does not occupy observation time,which is advantageous for space weather operations.Our method is not only suitable for FY-3E/X-EUVI but also a candidate method for the flat field measurement of future solar EUV telescopes.