The design objectives of modern aircraft engines include high load capacity,efficiency,and stability.With increasing loads,the phenomenon of corner separation in compressors intensifies,affecting engine performance an...The design objectives of modern aircraft engines include high load capacity,efficiency,and stability.With increasing loads,the phenomenon of corner separation in compressors intensifies,affecting engine performance and stability.Therefore,the adoption of appropriate flow control technology holds significant academic and engineering significance.This study employs the Reynolds-averaged Navier-Stokes(RANS)method to investigate the effects and mechanisms of active/passive Co-flow Jet(CFJ)control,implemented by introducing full-height and partial height jet slots between the suction surface and end wall of a compressor cascade.The results indicate that passive CFJ control significantly reduces the impact of corner separation at small incidence,with partial-height control further enhancing the effectiveness.The introduction of active CFJ enables separation control at large incidence,improving blade performance under different operating conditions.Active control achieves this by reducing the scale of corner separation vortices,effectively reducing the size of the separation region and enhancing blade performance.展开更多
BACKGROUND Although substantial evidence supports the advantages of cold snare polypectomy(CSP)in terms of polypectomy efficacy and reduced postoperative adverse events,few studies have examined the cost differences b...BACKGROUND Although substantial evidence supports the advantages of cold snare polypectomy(CSP)in terms of polypectomy efficacy and reduced postoperative adverse events,few studies have examined the cost differences between CSP and traditional endoscopic mucosal resection(EMR)for the treatment of intestinal polyps.AIM To compare the efficacy-cost of EMR and CSP in the treatment of intestinal polyps.METHODS A total of 100 patients with intestinal polyps were included in the retrospective data of our hospital from April 2022 to May 2023.According to the treatment methods,they were divided into EMR(n=46)group and CSP(n=54)group.The baseline data of the two groups were balanced by 1:1 propensity score matching(PSM),and the cost-effectiveness analysis was performed on the two groups after matching.The recurrence rate of the two groups of patients was followed up for 1 year,and they were divided into recurrence group and non-recurrence group according to whether they recurred.Multivariate logistic regression analysis was used to screen out the influencing factors affecting the recurrence of intestinal polyps after endoscopic resection.RESULTS Significant disparities were observed in the number of polyps and smoking background between the two groups before PSM(P<0.05).Following PSM,the number of polyps and smoking history were well balanced between the EMR and CSP groups.The direct cost incurred by the CSP group was markedly higher than that incurred by the EMR group.Concurrently,the cost-effectiveness ratio in the CSP group was substantially reduced when juxtaposed with that in the EMR group(P<0.05).Upon completion of the 1-year follow-up,the rate of recurrence after endoscopic intestinal polypectomy was 38.00%.Multivariate methods revealed that age≥60 years,male sex,number of polyps≥3,and pathological type of adenoma were risk factors for recurrence after endoscopic intestinal polypectomy(all P<0.05).CONCLUSION CSP was more cost-effective for the treatment of intestinal polyps.An age≥60 years,male sex,having a number of polyps≥3,and pathological type of adenoma are independent influencing factors for recurrence.展开更多
Feature detection and matching play important roles in many fields of computer vision, such as image understanding, feature recognition, 3D-reconstruction, video analysis, etc. Extracting features is usually the first...Feature detection and matching play important roles in many fields of computer vision, such as image understanding, feature recognition, 3D-reconstruction, video analysis, etc. Extracting features is usually the first step for feature detection or matching, and the gradient feature is one of the most used selections. In this paper, a new image feature-absence importance （AI） feature, which can directly characterize the local structure information, is proposed. Greatly different from the most existing features, the proposed absence importance feature is mainly based on the consideration that the absence of the important pixel will have a great effect on the local structure. Two absence importance features, mean absence importance （MAI） and standard deviation absence importance （SDAI）, are defined and used subsequently to construct new algorithms for feature detection and matching. Experiments demonstrate that the proposed absence importance features can be used as an important complement of the gradient feature and applied successfully to the fields of feature detection and matching.展开更多
An experimental setup for cold extrusion process with electric-hydraulic chattering was developed and its working principle was introduced. The finite element （FE） model for a kind of cup part （material： 20Cr） wa...An experimental setup for cold extrusion process with electric-hydraulic chattering was developed and its working principle was introduced. The finite element （FE） model for a kind of cup part （material： 20Cr） was built by using the software Deform-3D. FE simulation experiments with and without electric-hydraulic chattering were carried out to analyze the velocity fields and the metal grid flow lines. The extrusion ex- periments of the cup part were also performed under different conditions. The difference of metal flow lines with and without electric-hydraulic chattering was discussed via a scanning electron microscope （SEM） and the Keyence super-depth three-dimensional microscopic system. The results showed that with the electric-hydraulic chattering, the velocity of material flow increases, whereas deformation resistance decreases. Electric hydraulic chattering results in easy metal flow, small bending degree of metal flow lines, slender and dense metal grains, and thereby an improved quality of the deformed parts.展开更多
For news video images, caption recognizing is a useful and important step for content understanding. Caption locating is usually the first step of caption recognizing and this paper proposes a simple but effective cap...For news video images, caption recognizing is a useful and important step for content understanding. Caption locating is usually the first step of caption recognizing and this paper proposes a simple but effective caption locating algorithm called maximum feature score region （MFSR） based method, which mainly consists of two stages： In the first stage, up/down boundaries are attained by turning to edge map projection. Then, maximum feature score region is defined and left/right boundaries are achieved by utilizing MFSR. Experiments show that the proposed MFSR based method has superior and robust performance on news video images of different types.展开更多
The relativistic mean field(RMF)model has achieved great success in describing various nuclear phenomena.However,several serious defects are common.For instance,the pseudo-spin symmetry of high-l orbits is distinctly ...The relativistic mean field(RMF)model has achieved great success in describing various nuclear phenomena.However,several serious defects are common.For instance,the pseudo-spin symmetry of high-l orbits is distinctly violated in general,leading to spurious shell closures N Z 58 and 92.This leads to problems in describing structure properties,including shell structures,nuclear masses,etc.Guided by the pseudo-spin symmetry restoration[Geng et al.,Phys.Rev.C,100:051301(2019)],a new RMF Lagrangian DD-LZ1 is developed by considering the density-dependent meson-nucleon coupling strengths.With the newly obtained RMF Lagrangian DD-LZ1,satisfactory descriptions can be obtained for the bulk properties of nuclear matter and finite nuclei.In particular,significant improvements on describing the single-particle spectra are achieved by DD-LZ1.In particular,the spurious shell closures Z 58 and 92,commonly found in previous RMF calculations,are eliminated by the new effective interaction DD-LZ1,and consistently the pseudo-spin symmetry(PSS)around the Fermi levels is reasonably restored for both low-l and high-l orbits.Moreover,the description of nuclear masses is also notably improved by DD-LZ1,as compared to the other RMF Lagrangians.展开更多
基金National Science&Technology Major Project(Grant No.2017-II-0004-0016)National Nature Science Foundation of China(Grant No.52176044)。
文摘The design objectives of modern aircraft engines include high load capacity,efficiency,and stability.With increasing loads,the phenomenon of corner separation in compressors intensifies,affecting engine performance and stability.Therefore,the adoption of appropriate flow control technology holds significant academic and engineering significance.This study employs the Reynolds-averaged Navier-Stokes(RANS)method to investigate the effects and mechanisms of active/passive Co-flow Jet(CFJ)control,implemented by introducing full-height and partial height jet slots between the suction surface and end wall of a compressor cascade.The results indicate that passive CFJ control significantly reduces the impact of corner separation at small incidence,with partial-height control further enhancing the effectiveness.The introduction of active CFJ enables separation control at large incidence,improving blade performance under different operating conditions.Active control achieves this by reducing the scale of corner separation vortices,effectively reducing the size of the separation region and enhancing blade performance.
文摘BACKGROUND Although substantial evidence supports the advantages of cold snare polypectomy(CSP)in terms of polypectomy efficacy and reduced postoperative adverse events,few studies have examined the cost differences between CSP and traditional endoscopic mucosal resection(EMR)for the treatment of intestinal polyps.AIM To compare the efficacy-cost of EMR and CSP in the treatment of intestinal polyps.METHODS A total of 100 patients with intestinal polyps were included in the retrospective data of our hospital from April 2022 to May 2023.According to the treatment methods,they were divided into EMR(n=46)group and CSP(n=54)group.The baseline data of the two groups were balanced by 1:1 propensity score matching(PSM),and the cost-effectiveness analysis was performed on the two groups after matching.The recurrence rate of the two groups of patients was followed up for 1 year,and they were divided into recurrence group and non-recurrence group according to whether they recurred.Multivariate logistic regression analysis was used to screen out the influencing factors affecting the recurrence of intestinal polyps after endoscopic resection.RESULTS Significant disparities were observed in the number of polyps and smoking background between the two groups before PSM(P<0.05).Following PSM,the number of polyps and smoking history were well balanced between the EMR and CSP groups.The direct cost incurred by the CSP group was markedly higher than that incurred by the EMR group.Concurrently,the cost-effectiveness ratio in the CSP group was substantially reduced when juxtaposed with that in the EMR group(P<0.05).Upon completion of the 1-year follow-up,the rate of recurrence after endoscopic intestinal polypectomy was 38.00%.Multivariate methods revealed that age≥60 years,male sex,number of polyps≥3,and pathological type of adenoma were risk factors for recurrence after endoscopic intestinal polypectomy(all P<0.05).CONCLUSION CSP was more cost-effective for the treatment of intestinal polyps.An age≥60 years,male sex,having a number of polyps≥3,and pathological type of adenoma are independent influencing factors for recurrence.
基金supported by National Natural Science Foundation of China(Nos.61201395,61272394,61472119 and 61472373)the program for Science & Technology Innovation Talents in Universities of Henan Province(No.13HASTIT039)the Program for Young Backbone Teachers in Universities of Henan Province(Nos.2012GGJS-057 and 2013GGJS-052)
文摘Feature detection and matching play important roles in many fields of computer vision, such as image understanding, feature recognition, 3D-reconstruction, video analysis, etc. Extracting features is usually the first step for feature detection or matching, and the gradient feature is one of the most used selections. In this paper, a new image feature-absence importance （AI） feature, which can directly characterize the local structure information, is proposed. Greatly different from the most existing features, the proposed absence importance feature is mainly based on the consideration that the absence of the important pixel will have a great effect on the local structure. Two absence importance features, mean absence importance （MAI） and standard deviation absence importance （SDAI）, are defined and used subsequently to construct new algorithms for feature detection and matching. Experiments demonstrate that the proposed absence importance features can be used as an important complement of the gradient feature and applied successfully to the fields of feature detection and matching.
文摘An experimental setup for cold extrusion process with electric-hydraulic chattering was developed and its working principle was introduced. The finite element （FE） model for a kind of cup part （material： 20Cr） was built by using the software Deform-3D. FE simulation experiments with and without electric-hydraulic chattering were carried out to analyze the velocity fields and the metal grid flow lines. The extrusion ex- periments of the cup part were also performed under different conditions. The difference of metal flow lines with and without electric-hydraulic chattering was discussed via a scanning electron microscope （SEM） and the Keyence super-depth three-dimensional microscopic system. The results showed that with the electric-hydraulic chattering, the velocity of material flow increases, whereas deformation resistance decreases. Electric hydraulic chattering results in easy metal flow, small bending degree of metal flow lines, slender and dense metal grains, and thereby an improved quality of the deformed parts.
基金supported by National Natural Science Foundation of China(Nos.61272394,61201395 and61472119)the program for Science&Technology Innovation Talents in Universities of Henan Province(No.13HASTIT039)+1 种基金Henan Polytechnic University Innovative Research Team(No.T2014-3)Henan Polytechnic University Fund for Distinguished Young Scholars(No.J2013-2)
文摘For news video images, caption recognizing is a useful and important step for content understanding. Caption locating is usually the first step of caption recognizing and this paper proposes a simple but effective caption locating algorithm called maximum feature score region （MFSR） based method, which mainly consists of two stages： In the first stage, up/down boundaries are attained by turning to edge map projection. Then, maximum feature score region is defined and left/right boundaries are achieved by utilizing MFSR. Experiments show that the proposed MFSR based method has superior and robust performance on news video images of different types.
基金Supported by National Natural Science Foundation of China(11675065,11875152,11905088)Fundamental Research Funds for the central universities(lzujbky-2019-11)the Supercompuer Center of HIRFL。
文摘The relativistic mean field(RMF)model has achieved great success in describing various nuclear phenomena.However,several serious defects are common.For instance,the pseudo-spin symmetry of high-l orbits is distinctly violated in general,leading to spurious shell closures N Z 58 and 92.This leads to problems in describing structure properties,including shell structures,nuclear masses,etc.Guided by the pseudo-spin symmetry restoration[Geng et al.,Phys.Rev.C,100:051301(2019)],a new RMF Lagrangian DD-LZ1 is developed by considering the density-dependent meson-nucleon coupling strengths.With the newly obtained RMF Lagrangian DD-LZ1,satisfactory descriptions can be obtained for the bulk properties of nuclear matter and finite nuclei.In particular,significant improvements on describing the single-particle spectra are achieved by DD-LZ1.In particular,the spurious shell closures Z 58 and 92,commonly found in previous RMF calculations,are eliminated by the new effective interaction DD-LZ1,and consistently the pseudo-spin symmetry(PSS)around the Fermi levels is reasonably restored for both low-l and high-l orbits.Moreover,the description of nuclear masses is also notably improved by DD-LZ1,as compared to the other RMF Lagrangians.
