Variation Characteristics of Droughts and Floods in Deyang Area in the Past 30 years

Based on the data of annual average precipitation in Deyang area and its five stations (Mianzhu, Deyang, Zhongjiang, Shifang and Guanghan) from 1984 to 2013, the annual precipitation anomaly percentage was calculated, and then the flood and drought situation in Deyang area was graded to discuss the variation characteristics of droughts and floods in the past 30 years. The results show that the cycle of droughts and floods in Deyang was about 3-5 a. The precipitation anomaly percentage indicates that the climate in Deyang area of Sichuan tended to be dry slowly in the past 30 years, and Deyang gradually entered a dry and warm period.

Pulse-burst laser-based 10kHz Thomson scattering measurements

Thomson scattering (TS), as a popular and reliable diagnostic technique, has successfully measured electron temperatures and electron number densities of plasmas for many years. However, conventional TS techniques using Nd:YAG lasers operate only at tens of hertz. Here, we present the development of a high-repetition-rate TS instrument based on a high-speed, pulse-burst laser system to greatly increase the temporal resolution of measurements. Successful instrument prototype testing was carried out by collecting TS light from laboratory helium and argon plasmas at 10 kHz. Calibration of the instrument detection sensitivity using nitrogen/ oxygen rotational Raman scattering signal is also presented. Quantitative electron number densities and electron temperatures of the plasma were acquired at 10 kHz, for stable plasma discharges as, respectively,~0.9 eV and ~5.37×10^21 m^-3 for the argon plasma, and ~1 eV and ~6.5×10^21 m^-3 for the helium plasma.

Crystal structure of Cr_4AlB_4: A new MAB phase compound discovered in Cr-Al-B system

In this communication, the crystal structure of Cr_4AlB_4, a new MAB phase compound(where M is a transition metal, A is Al or Si, B is boron) discovered in Cr-Al-B system is reported. This new MAB phase was synthesized from a mixture of CrB and Al powders at 1000?C and its crystal structure was determined by a combination of X-ray diffraction, first-principles calculations and energy dispersive X-ray spectroscopy(EDS). Cr_4AlB_4 crystallizes in an orthorhombic structure with Immm space group. The lattice constants are a = 2.9343(6) ?, b = 18.8911(0) ?, c = 2.9733(7) ?, and the atomic positions are Cr1 at 4 g(0, 0.2936(5),0), Cr2 at 4 h(0.5, 0.5859(7), 0), Al at 2 b(0, 0.5, 0.5), B1 at 4 h(0, 0.3839(8), 0.5) and B2 at 4 g(0.5, 0.6646(2),0.5).

(Cr_(0.2)Mn_(0.2)Fe_(0.2)Co_(0.2)Mo_(0.2))B:A novel high-entropy monoboride with good electromagnetic interference shielding performance in K-band

A novel equimolar high-entropy(HE)transition metal monoboride,(Cr_(0.2)Mn_(0.2)Fe_(0.2)Co_(0.2)Mo_(0.2))B,was designed and prepared in powder and bulk form by high temperature elemental reaction method and spark plasma sintering(SPS)method,respectively.XRD analysis shows that HE(Cr_(0.2)Mn_(0.2)Fe_(0.2)Co_(0.2)Mo_(0.2))B possesses orthorhombic structure with Pnma space group.Through Rietveld refinement,the lattice parameters of HE(Cr_(0.2)Mn_(0.2)Fe_(0.2)Co_(0.2)Mo_(0.2))B are a=5.6675,b=2.9714,c=4.2209 and the theoretical density is 6.95 g/cm~3.The Vickers hardness and electrical conductivity of HE(Cr_(0.2)Mn_(0.2)Fe_(0.2)Co_(0.2)Mo_(0.2))B bulk with relative density of 90%is 12.3±0.5 GPa and 0.49±0.04×10~6 S/m,respectively.Due to high electrical conductivity,HE(Cr_(0.2)Mn_(0.2)Fe_(0.2)Co_(0.2)Mo_(0.2))B bulk with 3.0 mm thickness displays superior EMI shielding performance in 18.0–26.5 GHz(K-band),and the average values of SET,SER,and SEAare 23.3 dB,13.9 dB,and 9.4 dB,respectively.The EMI shielding mechanism of HE(Cr_(0.2)Mn_(0.2)Fe_(0.2)Co_(0.2)Mo_(0.2))B mainly results from reflection.

Phase pure and well crystalline Cr2AlB2:A key precursor for two-dimensional CrB

Phase pure and well crystalline Cr2AlB2 powders are synthesized by heating the mixtures of CrB and Al powders at 900~℃.Cr2AlB2 exhibits nanolaminated morphology which transforms from flake-like crystallite to needle-like grain with the increase of holding time.The morphology-structure relationships of Cr2AlB2 are delicately discussed.Meanwhile,as the precursor for fabrication of Cr2AlB2,high purity CrB powders are also prepared by high-temperature reaction of B and Cr elemental powders at 1800℃.CrB grains grow into regular plate-like morphology.Through Rietveld structure refinement,new sets of diffraction data are presented for both CrB and Cr2AlB2 and overlapped peak positions and intensities are revealed which make up for the deficiency of the existing data in ICDD PDF#32-0277(CrB)and ICDD PDF#72-1847(Cr2AlB2).Moreover,since MAB phases are precursors for preparing MBenes,2D-CrBnanosheets are successfully prepared by completely etching out Al atomic layers from Cr2AlB2.2D-CrB crystalizes in CrB structure with two-dimensional lamellar morphology.Simultaneously the formation mechanism of 2D-CrB is vividly depicted.A system of materials preparation from CrB to Cr2AlB2 and then to 2D-CrB is well established.

First demonstration of possible two-dimensional MBene CrB derived from MAB phase Cr_2AlB_2

In this communication, the possibility for the preparation of two-dimensional MBene CrB from MAB phase Cr2AlB2 is demonstrated for the first time. Herein M is a transition metal, A is a group IIIAor IVA element and B is boron; MAB phases are layered transition metal ternary borides, MBene is used to emphasize the loss of A group element from the parent MAB phases and to highlight the 2 D nature. The possible 2 D CrB nano sheets are prepared by selectively etching out Al layers from Cr2AlB-2 by immersing the Cr2AlB2 powders in dilute HCl solution at room temperature. The as-prepared 2 D CrB nano sheets are examined using X-ray diffraction and scanning electron microscopy and energy dispersive X-ray spectroscopy（EDS）. In addition, different structure models are built to explain the observed phenomena.The discovery in this work opens a door to the synthesis of a large number of new 2 D MBenes from MAB phases.

咖啡酸酯类衍生物作为神经保护剂的构效关系研究（英文）

本研究以多活性的咖啡酸苯乙酯为先导化合物,设计和合成了一系列咖啡酸酯类衍生物,在细胞水平上测定了化合物的抗炎、抗氧化活性,并利用平行人工膜透过实验评价了化合物的血脑屏障透过能力。结果显示,CAPE分子结构中的酚羟基、双键的结构改变对化合物的神经保护活性有重要影响,本文对相关构效关系进行了初步总结。另外,改造后的化合物在血脑屏障透过能力方面有显著提升。这些结果为今后CAPE的结构优化提供了重要依据。

Facile Generation of Strained Peptidyl Thiolactones from Hydrazides and Its Application in Assembling MUC-1 VNTR OIigomers

An efficient method for the activation of C-terminal 4-mecaptoproline-or penicillamine-containing peptide hydrazides in ligation re-actions is reported herein.The corresp on ding peptide hydrazides can be readily prepared using solid-phase peptide synthesis,and subsequently activated by acetylacet one(acac)without exoge nous thiol additives.Strained peptidyl thiolactones could be the possible reactive in termediates that drastically accelerate the reacti on rates at the sterically demandi ng proline and valine sites.This developed protocol allows for sequential peptide ligations in a one-pot manner,and expedites the assembly of mucin 1(MUC-1)variable number tandem repeat(VNTR)trimers in various glycosylated forms.

相似的吡啶酮类化合物具有显著不同的抗HIV-1逆转录酶活性（英文）

在结构多样的非核苷类逆转录酶抑制剂中,吡啶酮类化合物对于HIV-1野生株病毒和突变株病毒均表现出了良好活性。在对课题组前期的吡啶酮类抑制剂LAM-trans进行结构改造的过程中,我们发现在4位引入氮原子可以显著改善化合物的水溶性,但是结构中哌啶N原子的质子化导致了化合物与结合口袋疏水作用力的减弱。特别的是,质子化改变了脂环在疏水口袋中的取向,进而阻碍了关键卤素键的形成并最终导致抗HIV-1逆转录酶活性的巨大改变。这些研究结果,为以后吡啶酮类化合物的结构改造提供了一定的理论基础和实验依据。

Natural human–computer interaction control of multi operators in collaborative virtual maintenance based on optical human motion capture system

Aiming at the human–computer interaction control(HCIC)requirements of multi operators in collaborative virtual maintenance(CVM),real-time motion capture and simulation drive of multi operators with optical human motion capture system(HMCS)is proposed.The detailed realization process of real-time motion capture and data drive for virtual operators in CVM environment is presented to actualize the natural and online interactive operations.In order to ensure the cooperative and orderly interactions of virtual operators with the input operations of actual operators,collaborative HCIC model is established according to specific planning,allocating and decision-making of different maintenance tasks as well as the human–computer interaction features and collaborative maintenance operation features among multi maintenance trainees in CVM process.Finally,results of the experimental implementation validate the effectiveness and practicability of proposed methods,models,strategies and mechanisms.

Investigation on environment monitoring system for a combination of hydroponics and aquaculture in greenhouse

This work develops a distributed environmental monitoring system for the combination of hydroponics and aquaculture based on the internet of things technology,which mainly includes the information perception layer,the information transmission layer and the sys-tem architecture.The system has employed multiple sensors terminal to real-time acqui-sition,including air and water temperatures,dissolved oxygen etc.LoRa protocol is suitable for sending small data and the 4G was employed to collect data and send to the cloud plat-form.Java is used to develop background applications,to access cloud platforms and local data processing.Based on the collection and processing of environmental data and cloud service platform,the mobile application program client and remote login desktop have been developed.It has been implemented and tested in Tongzhou,Beijing for 3 months in 2020.The results showed the proposed monitoring system stability for overall operation and accuracy data transmission,which can support the actual hydroponics and aquacul-ture production management.After analysis of monitoring data collected from the devel-oped monitoring system,indoor air and water temperature have the obvious correlation with atmospheric pressure(0.7 and 0.9)and outdoor temperature(1.0 and 0.9),respectively.

Modeling and simulation methods of sea clutter based on measured data

The modeling and simulation of sea clutter are important in detecting radar targets in sea backgrounds.Because the nonstationary property of sea clutter is ignored in traditional statistical models,a new method based on measured sea clutter is proposed in this paper.First,we convert the measured sea clutter data under different sea conditions[xI,xQ]into real amplitude SM.Instantaneous phaseθis then extracted from the coherent radar’s baseband data.Second,we select a candidate statistic model and estimate its parameters based on SM by utilizing maximum likelihood estimation.Finally,we generate random series A using corresponding random data generator and then add instantaneous phaseθinto A,i.e.,y=Ae^(jθ),to obtain simulated sea clutter series.Through a comparison of simulated sea clutter and measured sea clutter data via histogram,the validity of the proposed method is proved.

Data compensation based on the additional feature information for collaborative interactive operation with optical human motion capture system

As the effective capture region of optical motion capture system is limited by quantity,installation mode,resolution and focus of infrared cameras,the reflective markers on certain body parts(such as wrists,elbows,etc.)of multi-actual trainees may be obscured when they perform the collaborative interactive operation.To address this issue,motion data compensation method based on the additional feature information provided by the electromagnetic spatial position tracking equipment is proposed in this paper.The main working principle and detailed realization process of the proposed method are introduced step by step,and the practical implementation is presented to illustrate its validity and efficiency.The results show that the missing capture data and motion information of relevant obscured markers on arms can be retrieved with the proposed method,which can avoid the simulation motions of corresponding virtual operators being interrupted and deformed during the collaborative interactive operation process performed by multiactual trainees with optical human motion capture system in a limited capture range.

Real-time interactive motion control of virtual human in virtual maintenance based on limited information

In order to provide a simple and efficient approach to perform the real-time interactive motion control of virtual human in virtual maintenance environment(VME),the motion control method of virtual human based on limited input information is proposed.With the space position tracking system with only one sensor the action sequences and motion models of virtual human,the human motions and hand actions in VME are driven by the sensor data in stages and in real time through the transmission condition control in the process of maintenance operation.And the input data and information is processed based on the method of Kalman filtering and wavelet transforming to improve the control effects.An experimental VME is also established to validate the control efficiency,and the experiment results show that the space motion control of virtual human in VME can be performed based on limited information with proposed control strategy.

Design and simulation of a novel E-mode GaN MIS-HEMT based on a cascode connection for suppression of electric field under gate and improvement of reliability

We proposed a novel Al Ga N/Ga N enhancement-mode（E-mode） high electron mobility transistor（HEMT） with a dual-gate structure and carried out the detailed numerical simulation of device operation using Silvaco Atlas. The dual-gate device is based on a cascode connection of an E-mode and a D-mode gate. The simulation results show that electric field under the gate is decreased by more than 70% compared to that of the conventional E-mode MIS-HEMTs（from 2.83 MV/cm decreased to 0.83 MV/cm）. Thus, with the discussion of ionized trap density, the proposed dual-gate structure can highly improve electric field-related reliability, such as, threshold voltage stability. In addition, compared with HEMT with field plate structure, the proposed structure exhibits a simplified fabrication process and a more effective suppression of high electric field.