The microstructures of different treated Al-5Mg-0.5Sc-0. 1Zr alloys have been studied with opticalmicroscopy and transmission electron microscope (TEM). Coherent particles with the matrix were found inas-cast sample. ...The microstructures of different treated Al-5Mg-0.5Sc-0. 1Zr alloys have been studied with opticalmicroscopy and transmission electron microscope (TEM). Coherent particles with the matrix were found inas-cast sample. composite Al3Sc/Al3Zr particles were found after 13 h homogenized treatment under 470℃.Coherent precipitates pinned dislocations and low-angle grain boundaries. and then restrained recrystallization. All kinds of particles of different treatments were not larger than 40nm. After high-temperaturestabilization treatments, most particles remain coherent with the matrix. The reasons of microstructurechange at different treated conditions have been analyzed.展开更多
The objective of this study is to investigate the possibility of continuous extrusion forming (Conform process) and microstructural evolution the of Cu-Mg alloy. The results indicate that Conform process can break as-...The objective of this study is to investigate the possibility of continuous extrusion forming (Conform process) and microstructural evolution the of Cu-Mg alloy. The results indicate that Conform process can break as-cast grains and refine the structure, meanwhile. This process can improve the degree of the structure homogeneity. The TEM and EBSD techniques were used to investigate the morphology, grain size and misorientation of the samples at cavity entrance and cavity export. Refined structures after shear deformation include broken grains and subgrains formed by dislocation reconstruction. Due to the relatively high deformation temperature, dynamic recrystallization occurred during deformation. The subgrain rotation nucleation took place, and grain boundary migration resulted in grain growth. However, the coarse grains were refined by anneal twins.展开更多
文摘The microstructures of different treated Al-5Mg-0.5Sc-0. 1Zr alloys have been studied with opticalmicroscopy and transmission electron microscope (TEM). Coherent particles with the matrix were found inas-cast sample. composite Al3Sc/Al3Zr particles were found after 13 h homogenized treatment under 470℃.Coherent precipitates pinned dislocations and low-angle grain boundaries. and then restrained recrystallization. All kinds of particles of different treatments were not larger than 40nm. After high-temperaturestabilization treatments, most particles remain coherent with the matrix. The reasons of microstructurechange at different treated conditions have been analyzed.
文摘The objective of this study is to investigate the possibility of continuous extrusion forming (Conform process) and microstructural evolution the of Cu-Mg alloy. The results indicate that Conform process can break as-cast grains and refine the structure, meanwhile. This process can improve the degree of the structure homogeneity. The TEM and EBSD techniques were used to investigate the morphology, grain size and misorientation of the samples at cavity entrance and cavity export. Refined structures after shear deformation include broken grains and subgrains formed by dislocation reconstruction. Due to the relatively high deformation temperature, dynamic recrystallization occurred during deformation. The subgrain rotation nucleation took place, and grain boundary migration resulted in grain growth. However, the coarse grains were refined by anneal twins.
