Spin–orbit torque in perpendicularly magnetized[Pt/Ni]multilayers

The performance of spin–orbit torque(SOT)in heavy metal/ferromagnetic metal periodic multilayers has attracted widespread attention.In this paper,we have successfully fabricated a series of perpendicular magnetized[Pt(2-t)/Ni(t)]_4 multilayers,and studied the SOT in the multilayers by varying the thickness of Ni layer t.The current induced magnetization switching was achieved with a critical current density of 1×10^(7)A/cm^(2).The damping-like SOT efficiencyξ_(DL)was extracted from an extended harmonic Hall measurement.We demonstrated that theξ_(DL)can be effectively modulated by t_(Pt)/t_(Ni)ratio of Pt and Ni in the multilayers.The SOT investigation about the[Pt/Ni]N multilayers might provide new material candidates for practical perpendicular SOT-MRAM devices.

提高石油天然气长输管道清管器定位效率的研究

结合石油天然气长输管道项目实际情况与工作经验，运用QC(quality control)小组活动的方式对374个清管测径段落进行跟踪分析，并对其中51个清管器被卡的段落进行了详细研究。通过对管道压力的变化、空气压缩机真实排气量的测算，以及对清管器的漏气量等参数进行分析和计算后，制定了提高被卡主清管器定位效率的措施，为石油天然气长输管道项目的预投产施工作业奠定坚实的基础。

水压试验与气压试验的对比分析

分析了水压试验和气压试验的优缺点。通过对工程的工期要求、施工技术、安全质量、工程环境等方面进行分析，得出在不同工况下进行水压试验和气压试验的相关建议，为项目的预投产施工作业打下了基础。

Solid-to-molecular-orientational-hexatic melting induced by local environment determined defect proliferations

Two-dimensional(2D)melting is a fundamental research topic in condensed matter physics,which can also provide guidance on fabricating new functional materials.Nevertheless,our understanding of 2D melting is still far from being complete due to existence of possible complicate transition mechanisms and absence of effective analysis methods.Here,using Monte Carlo simulations,we investigate 2D melting of 60°rhombs which melt from two different surface-fullycoverable crystals,a complex hexagonal crystal(cHX)whose primitive cell contains three rhombs,and a simple rhombic crystal(RB)whose primitive cell contains one rhomb.The melting of both crystals shows a sequence of solid,hexatic in molecular orientation(Hmo),and isotropic phases which obey the Berezinskii-Kosterlitz-Thouless-Halperin-Nelson-Young(BKTHNY)theory.However,local polymorphic configuration(LPC)based analysis reveals different melting mechanisms:the cHX-Hmotransition is driven by the proliferation of point-like defects during which defect-associated LPCs are generated sequentially,whereas the RB-Hmotransition is driven by line defects where defect-associated LPCs are generated simultaneously.These differences result in the observed different solid-Hmotransition points which areφA=0.812 for the cHX-HmoandφA=0.828 for the RB-Hmo.Our work will shed light on the initial-crystal-dependence of 2D melting behavior.

本征柔性有机电子器件的研究进展

本征柔性有机电子学是近年来涌现的一项变革性的前沿交叉学科,它赋予电子材料可印刷、可折叠和可拉伸等特性,使其应用于健康医疗、柔性显示、传感探测、人工智能和脑机接口等前沿领域.为了进一步拓展本征柔性有机电子器件的应用场景,设计开发高性能、高显示度、高稳定性的本征柔性材料和有机电子器件是当前的研究重点.本文主要介绍了近年来本征柔性有机电子学相关领域的前沿研究进展,重点讨论了本征柔性材料与有机电子器件的设计和制备策略、本征柔性材料图案化工艺和集成电路,分析了本征柔性有机电子学领域的技术瓶颈和前沿问题,总结和展望了本征柔性有机电子器件的应用前景与未来发展趋势.

An aqueous rechargeable Fe//LiMn_(2)O_()hybrid battery with superior electrochemical performance beyond mainstream Fe-based batteries

Aqueous rechargeable batteries(ARBs)are generally safer than non-aqueous analogues,they are also less-expensive,and more friendly to the environment.However,the inherent disadvantage of the narrow electrochemical window of H2O seriously restricts the energy density and output voltage of ARBs,especially aqueous rechargeable Fe-based batteries.Herein,we introduce a new battery system:the anode contains C@Fe/Fe_(2)O_(3)composite,which is interfaced with an alkaline electrolyte;the cathode contains LiMn_(2)O_()in contact with a neutral electrolyte.A Li^(+)-conducting membrane is carefully selected to decouple the electrode-electrolyte,which effectively widens the electrochemical window to above 2.65 V,thereby enables an aqueous rechargeable iron battery.Its average output voltage is 1.83 V and its energy density is 235.3 Wh/kg at 549 W/kg.In this work,we propose the energy storage mechanism with the aid of density functional theory(DFT).The calculated reduction potential of the anode agrees with the experimental value.Furthermore,this battery system demonstrates long cycle lifespan of approximately 2500 cycles at 2 A/g,corresponding to a capacity retention of 82.1%.These results are very far superior than those of mainstream aqueous rechargeable Fe-based batteries,which guarantee future investigation for storing electricity energy.

Electrohydrodynamic printing for high resolution patterning of flexible electronics toward industrial applications

Electrohydrodynamic(EHD)printing technique,which deposits micro/nanostructures through high electric force,has recently attracted significant research interest owing to their fascinating characteristics in high resolution(<1μm),wide material applicability(ink viscosity 1–10000 cps),tunable printing modes(electrospray,electrospinning,and EHD jet printing),and compatibility with flexible/wearable applications.Since the laboratory level of the EHD printed electronics'resolution and efficiency is gradually approaching the commercial application level,an urgent need for developing EHD technique from laboratory into industrialization have been put forward.Herein,we first discuss the EHD printing technique,including the ink design,droplet formation,and key technologies for promoting printing efficiency/accuracy.Then we summarize the recent progress of EHD printing in fabrication of displays,organic field-effect transistors(OFETs),transparent electrodes,and sensors and actuators.Finally,a brief summary and the outlook for future research effort are presented.

Electric-Induced Cycloelimination for Simulating Structural Plasticity in Organic Nociceptors

Continuous lifelong acquisition,updating,and finetuning of knowledge and skills is of crucial significance for the survival of humans.However,current neuromorphic devices exhibit obvious catastrophic forgetting when restimulated by new information.This remains a challenge for neuromorphic devices and artificial intelligence to achieve continuous learning.Herein,we propose an electric-induced cycloelimination strategy to realize an organic transistor nociceptor that can simulate synaptic and structural plasticity.The system benefits from the ring-opening characteristics of cross-linked poly(vinyl cinnamate)under a strong pulse voltage,during which new energy-level trap states are formed.The prepared organic transistor nociceptors exhibit both structural and synaptic plasticity.They simulate the characteristics of human nociceptors,including threshold,relaxation,sensitization,and maladaptation behavior.For the first time,we have simulated and explored the structural plasticity behavior in organisms based on electronic devices.More remarkably,the transistor nociceptors realize the reinput of information without forgetting the initial informa tion.The strategy developed for the preparation of organic transistor nociceptors provides insights for addressing the catastrophic forgetting in the lifelong learning of intelligent neuromorphic devices.

High-performance flexible organic field effect transistors with print-based nanowires

Polymer nanowire(NW)organic field-effect transistors(OFETs)integrated on highly aligned large-area flexible substrates are candidate structures for the development of high-performance flexible electronics.This work presents a universal technique,coaxial focused electrohydrodynamic jet(CFEJ)printing technology,to fabricate highly aligned 90-nm-diameter polymer arrays.This method allows for the preparation of uniformly shaped and precisely positioned nanowires directly on flexible substrates without transfer,thus ensuring their electrical properties.Using indacenodithiophene-co-benzothiadiazole(IDT-BT)and poly(9,9-dioctylfluorene-co-benzothiadiazole)(F8-BT)as example materials,5 cm^(2) arrays were prepared with only minute size variations,which is extremely difficult to do using previously reported methods.According to 2D-GIXRD analysis,the molecules inside the nanowires mainly adopted face-onπ-stacking crystallite arrangements.This is quite different from the mixed arrangement of thin films.Nanowire-based OFETs exhibited a high average hole mobility of 1.1 cm^(2) V^(−1) s^(−1) and good device uniformity,indicating the applicability of CFEJ printing as a potential batch manufacturing and integration process for high-performance,scalable polymer nanowire-based OFET circuits.This technique can be used to fabricate various polymer arrays,enabling the use of organic polymer semiconductors in large-area,high-performance electronic devices and providing a new path for the fabrication of flexible displays and wearable electronics in the future.

A Novel Anti-Collision Algorithm for Large Scale of UHF RFID Tags Access Systems

When the radio frequency identification(RFID)system inventories multiple tags,the recognition rate will be seriously affected due to collisions.Based on the existing dynamic frame slotted Aloha(DFSA)algorithm,a sub-frame observation and cyclic redundancy check(CRC)grouping combined dynamic framed slotted Aloha(SUBF-CGDFSA)algorithm is proposed.The algorithm combines the precise estimation method of the quantity of large-scale tags,the large-scale tags grouping mechanism based on CRC pseudo-randomcharacteristics,and the Aloha anti-collision optimization mechanism based on sub-frame observation.By grouping tags and sequentially identifying themwithin subframes,it accurately estimates the number of remaining tags and optimizes frame length accordingly to improve efficiency in large-scale RFID systems.Simulation outcomes demonstrate that this proposed algorithmcan effectively break through the system throughput bottleneck of 36.8%,which is up to 30%higher than the existing DFSA standard scheme,and has more significant advantages,which is suitable for application in largescale RFID tags scenarios.

多卤化策略构筑双极性晶体管和具有良好噪声容限的高增益反相器

双极性半导体聚合物在有机场效应晶体管(OFETs)和逻辑电路中具有良好的应用前景.本文报道了一种多卤化策略,合成了第一个多卤化环化靛蓝(FClBAI)及其聚合物(PFClBAI-V).PFClBAI-V具有超窄的光学带隙(0.99 eV),其HOMO和LUMO能级分别为-5.40和-3.86 eV.基于PFClBAI-V的OFETs表现出良好的平衡双极性半导体性能,其最大空穴和电子迁移率分别为1.72和1.22 cm^(2)Vs.此外,其p型阈值电压和n型阈值电压非常接近.基于PFClBAI-V的反相器的增益高达136,同时噪声容限达到了68.5%,这些结果是基于双极性聚合物的反相器的最高值之一.上述结果表明多卤化是一种获得平衡双极性晶体管和高性能反相器的有效策略.

Highly sensitive,scalable,and rapid SARS-CoV-2 biosensor based on In_(2)O_(3)nanoribbon transistors and phosphatase

Developing convenient and accurate SARS-CoV-2 antigen test and serology test is crucial in curbing the global COVID-19 pandemic.In this work,we report an improved indium oxide(In2O3)nanoribbon field-effect transistor(FET)biosensor platform detecting both SARS-CoV-2 antigen and antibody.Our FET biosensors,which were fabricated using a scalable and cost-efficient lithography-free process utilizing shadow masks,consist of an In_(2)O_(3)channel and a newly developed stable enzyme reporter.During the biosensing process,the phosphatase enzymatic reaction generated pH change of the solution,which was then detected and converted to electrical signal by our In_(2)O_(3)FETs.The biosensors applied phosphatase as enzyme reporter,which has a much better stability than the widely used urease in FET based biosensors.As proof-of-principle studies,we demonstrate the detection of SARS-CoV-2 spike protein in both phosphate-buffered saline(PBS)buffer and universal transport medium(UTM)(limit of detection[LoD]:100 fg/mL).Following the SARS-CoV-2 antigen tests,we developed and characterized additional sensors aimed at SARS-CoV-2 IgG antibodies,which is important to trace past infection and vaccination.Our spike protein IgG antibody tests exhibit excellent detection limits in both PBS and human whole blood((LoD):1 pg/mL).Our biosensors display similar detection performance in different mediums,demonstrating that our biosensor approach is not limited by Debye screening from salts and can selectively detect biomarkers in physiological fluids.The newly selected enzyme for our platform performs much better performance and longer shelf life which will lead our biosensor platform to be capable for real clinical diagnosis usage.

Air-stable n-type transistors based on assembled aligned carbon nanotube arrays and their application in complementary metal-oxide-semiconductor electronics

Carbon nanotubes(CNTs)are ideal candidates for beyond-silicon nano-electronics because of their high mobility and low-cost processing.Recently,assembled massively aligned CNTs have emerged as an important platform for semiconductor electronics.However,realizing sophisticated complementary nano-electronics has been challenging due to the p-type nature of carbon nanotubes in air.Fabrication of n-type behavior field effect transistors(FETs)based on assembled aligned CNT arrays is needed for advanced CNT electronics.Here in this paper,we report a scalable process to make n-type behavior FETs based on assembled aligned CNT arrays.Air-stable and high-performance n-type behavior CNT FETs are achieved with high yield by combining the atomic layer deposition dielectric and metal contact engineering.We also systematically studied the contribution of metal contacts and atomic layer deposition passivation in determining the transistor polarity.Based on these experimental results,we report the successful demonstration of complementary metal-oxide-semiconductor inverters with good performance,which paves the way for realizing the promising future of carbon nanotube nano-electronics.