Progress of Lyman-alpha-based beam emission spectroscopy(Ly BES)diagnostic on the HL-2A tokamak

An edge Lyman-alpha-based beam emission spectroscopy(LyBES)diagnostic,using a heating NBI(neutral beam injection)system,is currently under development on the HL-2A tokamak.The 20-channel edge LyBES,which is intended to measure the density fluctuation in plasma edge(from R=1960 mm to R=2026 mm)with an improved spatial resolution of 3.3 mm,is a complement to the existing conventional beam emission spectroscopy(BES)diagnostic.In this article,we introduce the progress of LyBES diagnostic,including the collection optics,the monochromator,and the detector system.The reflectance of the collection mirrors is measured to be~82%at 122 nm,and the aberration geometrical radius of the collection optics is tested to be~150μm in the aimed area.The linear dispersion of the LyBES monochromator is designed to be~0.09 nm mm^(-1).The bandwidth of the detector system with the 5×10^(7)V A^(-1)preamplifier gain is measured to be~280 kHz,and the peak-to-peak noise of the detector system is tested to be~16 mV.The finalized design,components development and testing of the LyBES diagnostic have been completed at present,and an overall performance of the LyBES diagnostic is to be confirmed in the next HL-2A campaign.

Optical design of a novel near-infrared phase contrast imaging(NI-PCI)diagnostic on the HL-2A tokamak

The optical design of near-infrared phase contrast imaging(NI-PCI)diagnosis on HL-2A is introduced in this paper.This scheme benefits from the great progress of near-infrared laser technology and is a broadening of traditional phase contrast technology.This diagnostic can work as a keen tool to measure plasma wavenumber spectra by inferring string-integrated plasma density fluctuations.Design of both the front optical path which is the path before the laser transmitting into the tokamak plasma and the rear optics which is the path after the laser passing through the plasma is detailed.The 1550 nm laser is chosen as the probe beam and highprecision optical components are designed to fit the laser beam,in which a phase plate with a 194-nm-deep silver groove is the key.Compared with the conventional 10.6μm laser-based PCI system on HL-2A,NI-PCI significantly overcomes the unwanted phase scintillation effect and promotes the measurement capability of high-wavenumber turbulence with an increased maximal measurable wavenumber from 15 cm^(-1)to 32.6 cm^(-1).

Structure influence of alkyl chains of thienothiophene-porphyrins on the performance of organic solar cells

Two new A-D-A porphyrin derivatives,denoted as XLP-I and XLP-II,were prepared through extending theπ-conjugation of thienothiophene-porphyrin center with phenylethynyl bridges and electron-deficient ethylrhodanine terminal units,and varying the structures of alkyl chain(linear vs branched)on peripheral thienothiophene substitutions of porphyrin rings.Both molecules show strong absorption in UV–visible–near-infrared region,good thermal stability,suitable energy levels,and ordered molecular packing in solid state.In organic solar cells,PC71BM was used as electron acceptor,and porphyrin small molecules were used as electron donors.The device based on XLP-I exhibits a power conversion efficiency(PCE)of 8.30%,an open circuit voltage(Voc)of 0.894 eV,and a fill factor(FF)of 62.1%.In contrast,the device based on XLP-II presents an inferior performance with a PCE of 3.14%,a Voc of 0.847 eV,and a FF of 49.3%.The better performance of XLP-I based device is mainly attributed to its optimized film morphology,excellent absorption,and well-balanced charge transport properties.

Synthesis,insecticidal activity and stability study of novel nitromethylene neonicotinoids with five-membered aromatic heterocycles

Twenty-four novel neonicotinoid analogues with nitromethylene and five-membered aromatic heterocycles were designed and synthesized.All target molecular structures have been confirmed by analytical and spectral data.Some compounds exhibited notable insecticidal activities against aphid(Aphis medicaginis)and brown planthopper(Nilaparvata lugens).The aqueous stability test confirmed that the stabilities of those compounds were superior to the leading compound,and the photostability was even better than that of imidacloprid.

Skin layer of A380 aluminium alloy die castings and its blistering during solution treatment

Skin layer is a characteristic microstructure of aluminium die castings, which would effect the surface blistering during solution treatment. In this study, the microstructures of skin layer were investigated by the methods of optical microscope (OM), scanning electron microscope (SEM) and electron probe microanalyzer (EPMA). High resolution X-ray CT was used to compare the skin layer with normal surface before and after solution treatment. With the aid of computational fluid dynamics (CFD), the formation mechanism of the skin layer was discussed based on microstructure distribution, solute segregation, porosity distribution and surface blistering. The results suggested that the skin layer is related to a succession of complex processes before the filling process finished. Pore clusters or laminar defects would be formed in skin layers during solution treatm ent and cause severe surface blistering.