The anisotropic two-dimensional （2D） layered material rhenium disulfide （ReSe2） has attracted considerable attention because of its unusual properties and promising applications in electronic and optoelectronic de...The anisotropic two-dimensional （2D） layered material rhenium disulfide （ReSe2） has attracted considerable attention because of its unusual properties and promising applications in electronic and optoelectronic devices. However, because of its low lattice symmetry and interlayer decoupling, anisotropic growth and out-of-plane growth occur easily, yielding thick flakes, dendritic structure, or flower-like structure. In this stud34 we demonstrated a bottom-up method for the controlled and scalable synthesis of ReSe2 by van der Waals epitaxy. To achieve controllable growth, a micro-reactor with a confined reaction space was constructed by stacking two mica substrates in the chemical vapor deposition system. Within the confined reaction space, the nucleation density and growth rate of ReSe2 were significantly reduced, favoring the large-area synthesis of ReSe2 with a uniform monolayer thickness. The morphological evolution of ReSe2 with growth temperature indicated that the anisotropic growth was suppressed at a low growth temperature （〈600 ℃）. Field-effect transistors employing the grown ReSe2 exhibited p-type conduction with a current ON/OFF ratio up to 10s and a hole carrier mobility of 0.98 cm^2/（V·s）. Furthermore, the ReSe2 device exhibited an outstanding photoresponse to near-infrared light, with responsivity up to 8.4 and 5.1 A/W for 850- and 940-nm light, respectively. This work not only promotes the large-scale application of ReSe2 in high-performance electronic devices but also clarifies the growth mechanism of low-lattice symmetry 2D materials.展开更多
The development of compressible supercapacitors strongly relies on the design of electrode materials combining superior compressibility,high conductivity with the stable electrochemical cycling performance.In this wor...The development of compressible supercapacitors strongly relies on the design of electrode materials combining superior compressibility,high conductivity with the stable electrochemical cycling performance.In this work,we report a facile yet scalable strategy to construct a highly compressible supercapacitor by integrating the current collector,active materials and the separator into one device.We use the highly compressive melamine foam(MF)as scaffold and the Ti_(3)C_(2)T_(x)nanosheets as the active materials.Filling the few-layer Ti_(3)C_(2)T_(x)nanosheets into the skeleton of MF by capillary force followed by freeze-drying yields the MF/Ti_(3)C_(2)T_(x)composite with superior structural integrity that can be compressed at a large strain of 50%for 100 cycles.The electrochemical performances of the all-in-one supercapacitor were systematically investigated under diverse compression strains.The improved conductivity and reduced ion diffusion length allow the all-in-one supercapacitor to exhibit fast ion and electron kinetics even at high strain of 60%,delivering a maximal volumetric specific energy of 0.37 mWh∙cm^(-3)at power density of 0.42 mW∙cm^(-3)and extraordinary cycling performance during the 2,500 compression cycles.展开更多
基金The authors acknowledge the insightful suggestions and comments from Dr. S. C. Zhang and N. N. Mao at Peking University. This work was supported by the National Natural Science Foundation of China （Nos. 51502167 and 21473110）, and the fundamental Research Funds for the Central Universities （No. GK201502003）, L. Z. and J. K. acknowledge the funding by the Center for Integrated Quantum Materials under NSF （No. DMR-1231319）.
文摘The anisotropic two-dimensional （2D） layered material rhenium disulfide （ReSe2） has attracted considerable attention because of its unusual properties and promising applications in electronic and optoelectronic devices. However, because of its low lattice symmetry and interlayer decoupling, anisotropic growth and out-of-plane growth occur easily, yielding thick flakes, dendritic structure, or flower-like structure. In this stud34 we demonstrated a bottom-up method for the controlled and scalable synthesis of ReSe2 by van der Waals epitaxy. To achieve controllable growth, a micro-reactor with a confined reaction space was constructed by stacking two mica substrates in the chemical vapor deposition system. Within the confined reaction space, the nucleation density and growth rate of ReSe2 were significantly reduced, favoring the large-area synthesis of ReSe2 with a uniform monolayer thickness. The morphological evolution of ReSe2 with growth temperature indicated that the anisotropic growth was suppressed at a low growth temperature （〈600 ℃）. Field-effect transistors employing the grown ReSe2 exhibited p-type conduction with a current ON/OFF ratio up to 10s and a hole carrier mobility of 0.98 cm^2/（V·s）. Furthermore, the ReSe2 device exhibited an outstanding photoresponse to near-infrared light, with responsivity up to 8.4 and 5.1 A/W for 850- and 940-nm light, respectively. This work not only promotes the large-scale application of ReSe2 in high-performance electronic devices but also clarifies the growth mechanism of low-lattice symmetry 2D materials.
基金This work was supported by the National Natural Science Foundation of China(No.51772181)the Fundamental Research Funds for the Central Universities(No.2019TS006)+1 种基金the Natural Science Basic Research Plan of Shaanxi Province(No.2019JLP-12)Shaanxi Sanqin Scholars Innovation Team.
文摘The development of compressible supercapacitors strongly relies on the design of electrode materials combining superior compressibility,high conductivity with the stable electrochemical cycling performance.In this work,we report a facile yet scalable strategy to construct a highly compressible supercapacitor by integrating the current collector,active materials and the separator into one device.We use the highly compressive melamine foam(MF)as scaffold and the Ti_(3)C_(2)T_(x)nanosheets as the active materials.Filling the few-layer Ti_(3)C_(2)T_(x)nanosheets into the skeleton of MF by capillary force followed by freeze-drying yields the MF/Ti_(3)C_(2)T_(x)composite with superior structural integrity that can be compressed at a large strain of 50%for 100 cycles.The electrochemical performances of the all-in-one supercapacitor were systematically investigated under diverse compression strains.The improved conductivity and reduced ion diffusion length allow the all-in-one supercapacitor to exhibit fast ion and electron kinetics even at high strain of 60%,delivering a maximal volumetric specific energy of 0.37 mWh∙cm^(-3)at power density of 0.42 mW∙cm^(-3)and extraordinary cycling performance during the 2,500 compression cycles.
