To expedite the development of industrial technology for producing 2-alkylanthraquinone,a novel pilot test of alkylation-oxidation technology was conducted.The process mainly included anthracene alkylation,separation ...To expedite the development of industrial technology for producing 2-alkylanthraquinone,a novel pilot test of alkylation-oxidation technology was conducted.The process mainly included anthracene alkylation,separation of anthracene and 2-alkylanthracene,oxidation of 2-alkylanthracene,and product purification.Optimal alkylation conditions yielded a 91.1%conversion of anthracene and a 71.73%selectivity for 2-alkylanthracene.To address the separation problem of anthracene and 2-alkylanthracene,solvent-assisted distillation technology was developed,resulting in a 98.9%purity of 2-alkylanthracene and a 91.82%separation yield.When the molar ratio of H2O_(2) to 2-alkylanthracene was 7:1,a 98.96%conversion of 2-alkylanthracene and a 99.94%selectivity for 2-alkylanthraquinone were achieved.A novel composition of 2-alkylanthraquinone,including 2-tert-butylanthraquinone,2-tert-amylanthraquinone,and 2-hexylanthraquinone,was developed.This composition could be effectively separated and purified through a combination of crystallization and washing processes.The elemental composition of the product met the existing standards,and its hydrogenation performance closely matched that of commercially available 2-tert-amylanthraquinone products.展开更多
The authors regret that the printed version of the above article contained an error reference.We hope to correct it here.[14]B.J.M.Christophe Legein,Franck Fayon,Angew.Chem.Int.Ed.,132(2020)19409–19415.
The selective aerobic oxidation of benzyl alcohol to benzaldehyde has attracted considerable attention because benzaldehyde is a high value-added product. The rate of this typical gas–liquid reaction is significantly...The selective aerobic oxidation of benzyl alcohol to benzaldehyde has attracted considerable attention because benzaldehyde is a high value-added product. The rate of this typical gas–liquid reaction is significantly affected by mass transfer. In this study, CoTPP-mediated(CoTPP: cobalt(II) mesotetraphenylporphyrin) selective benzyl alcohol oxidation with oxygen was conducted in a membrane microchannel(MMC) reactor and a bubble column(BC) reactor, respectively. We observed that 83% benzyl alcohol was converted within 6.5 min in the MMC reactor, but only less than 10% benzyl alcohol was converted in the BC reactor. Hydrodynamic characteristics and gas–liquid mass transfer performances were compared for the MMC and BC reactors. The MMC reactor was assumed to be a plug flow reactor,and the dimensionless variance was 0.29. Compared to the BC reactor, the gas–liquid mass transfer was intensified significantly in MMC reactor. It could be ascribed to the high gas holdup(2.9 times higher than that of BC reactor), liquid film mass transfer coefficient(8.2 times higher than that of BC reactor), and mass transfer coefficient per unit interfacial area(3.8 times higher than that of BC reactor). Moreover,the Hatta number for the MMC reactor reached up to 0.61, which was about 15 times higher than that of the BC reactor. The computational fluid dynamics calculations for mass fractions in both liquid and gas phases were consistent with the experimental data.展开更多
The work herein employed a rotating packed bed(RPB)to intensify the sulfonation process of 1,4-diaminoanthraquinone leuco(DL)in an attempt to improve the yield of the product 1,4-diaminoanthra quinone-2-sulfonic acid(...The work herein employed a rotating packed bed(RPB)to intensify the sulfonation process of 1,4-diaminoanthraquinone leuco(DL)in an attempt to improve the yield of the product 1,4-diaminoanthra quinone-2-sulfonic acid(DSA).First,the effects of operating conditions in a stirred tank reactor(STR),including stirring speed,chlorosulfonic acid/DL molar ratio(η),solvent/DL mass ratio(ζ),reaction temperature and dropping speed of chlorosulfonic acid,on the yield of DSA were investigated.The yield of DSA can reach 87.34%under the optimal operating conditions:stirring speed of 500 r·min^(-1),ηof 4.5,ζof 7,reaction temperature of 150℃,dropping speed of 0.61 ml·min^(-1).In addition,the kinetics of the sulfonation process via the shrinking core model revealed that the reaction is controlled by diffusion via a product layer under the reaction temperature of 140℃.Furthermore,the RPB was employed to intensify the mass transfer between liquid and solid phases during the sulfonation reaction process.The results showed that the DSA yield of 92.69%obtained by RPB was 5.35%higher than that by STR,indicating that RPB can significantly intensify the mass transfer in the liquid-solid phase sulfonation reaction process.展开更多
As one of the few renewable aromatic resources,the research of depolymerization of lignin into highvalue chemicals has attracted extensive attention in recent years.Catalytic wet aerobic oxidation(CWAO)is an effective...As one of the few renewable aromatic resources,the research of depolymerization of lignin into highvalue chemicals has attracted extensive attention in recent years.Catalytic wet aerobic oxidation(CWAO)is an effective technology to convert lignin like sodium lignosulfonate(SL),a lignin derivative,into aromatic aldehydes such as vanillin and syringaldehyde.However,how to improve the yield of aromatic aldehyde and conversion efficiency is still a challenge,and many operating conditions that significantly affect the yield of these aromatic compounds have rarely been investigated systematically.In this work,we adopted the stirred tank reactor(STR)for the CWAO process with nano-CuO as catalyst to achieve the conversion of SL into vanillin and syringaldehyde.The effect of operating conditions including reaction time,oxygen partial pressure,reaction temperature,SL concentration,rotational speed,catalyst amount,and NaOH concentration on the yield of single phenolic compound was systematically investigated.The results revealed that all these operating conditions exhibit a significant effect on the aromatic aldehyde yield.Therefore,they should be regulated in an optimal value to obtain high yield of these aldehydes.More importantly,the reaction kinetics of the lignin oxidation was explored.This work could provide basic data for the optimization and design of industrial operation of lignin oxidation.展开更多
In this work, the solubility data of 9-fluorenone in 11 pure solvents(methanol, ethanol, n-propanol, isopropanol, n-butanol, iso-butanol, acetonitrile, ethyl formate, ethyl acetate, dimethyl sulfoxide, n-hexane)were m...In this work, the solubility data of 9-fluorenone in 11 pure solvents(methanol, ethanol, n-propanol, isopropanol, n-butanol, iso-butanol, acetonitrile, ethyl formate, ethyl acetate, dimethyl sulfoxide, n-hexane)were measured by the gravimetric method from 278.15 K to 318.15 K under atmospheric pressure. The results showed that the solubility of 9-fluorenone in all tested solvents increased with the raised temperature. The solubility data were correlated by the modified Apelblat equation, λh model and NRTL(nonradom two fluid) model. The average relative deviation(ARD) correlated by three thermodynamic models in different solvents was all below 5%, which indicated that the three thermodynamic models fit the solubility data well. Furthermore, the mixing thermodynamic properties of 9-fluorenone in pure solvent systems were calculated via NRTL model. The results indicated the dissolution process of 9-fluorenone is spontaneous and entropically favorable. The solubility and the mixing thermodynamic properties provided in this paper would play an important role in industrial manufacture and follow-up operation of 9-fluorenone.展开更多
基金supported by a grant from the National Natural Science Foundation of China(NSFC 22378437)the SINOPEC Excellent Youth Funds(ST22174).
文摘To expedite the development of industrial technology for producing 2-alkylanthraquinone,a novel pilot test of alkylation-oxidation technology was conducted.The process mainly included anthracene alkylation,separation of anthracene and 2-alkylanthracene,oxidation of 2-alkylanthracene,and product purification.Optimal alkylation conditions yielded a 91.1%conversion of anthracene and a 71.73%selectivity for 2-alkylanthracene.To address the separation problem of anthracene and 2-alkylanthracene,solvent-assisted distillation technology was developed,resulting in a 98.9%purity of 2-alkylanthracene and a 91.82%separation yield.When the molar ratio of H2O_(2) to 2-alkylanthracene was 7:1,a 98.96%conversion of 2-alkylanthracene and a 99.94%selectivity for 2-alkylanthraquinone were achieved.A novel composition of 2-alkylanthraquinone,including 2-tert-butylanthraquinone,2-tert-amylanthraquinone,and 2-hexylanthraquinone,was developed.This composition could be effectively separated and purified through a combination of crystallization and washing processes.The elemental composition of the product met the existing standards,and its hydrogenation performance closely matched that of commercially available 2-tert-amylanthraquinone products.
文摘The authors regret that the printed version of the above article contained an error reference.We hope to correct it here.[14]B.J.M.Christophe Legein,Franck Fayon,Angew.Chem.Int.Ed.,132(2020)19409–19415.
基金financially supported by the National Key Research and Development Program of China (2020YFA0210900)the National Natural Science Foundation of China (21938001 and 21878344)+1 种基金Guangdong Provincial Key Research and Development Programme (2019B110206002)the Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program (2017BT01C102)。
文摘The selective aerobic oxidation of benzyl alcohol to benzaldehyde has attracted considerable attention because benzaldehyde is a high value-added product. The rate of this typical gas–liquid reaction is significantly affected by mass transfer. In this study, CoTPP-mediated(CoTPP: cobalt(II) mesotetraphenylporphyrin) selective benzyl alcohol oxidation with oxygen was conducted in a membrane microchannel(MMC) reactor and a bubble column(BC) reactor, respectively. We observed that 83% benzyl alcohol was converted within 6.5 min in the MMC reactor, but only less than 10% benzyl alcohol was converted in the BC reactor. Hydrodynamic characteristics and gas–liquid mass transfer performances were compared for the MMC and BC reactors. The MMC reactor was assumed to be a plug flow reactor,and the dimensionless variance was 0.29. Compared to the BC reactor, the gas–liquid mass transfer was intensified significantly in MMC reactor. It could be ascribed to the high gas holdup(2.9 times higher than that of BC reactor), liquid film mass transfer coefficient(8.2 times higher than that of BC reactor), and mass transfer coefficient per unit interfacial area(3.8 times higher than that of BC reactor). Moreover,the Hatta number for the MMC reactor reached up to 0.61, which was about 15 times higher than that of the BC reactor. The computational fluid dynamics calculations for mass fractions in both liquid and gas phases were consistent with the experimental data.
基金financially supported by the National Key Research and Development Program of China(2016YFB0301500)the National Natural Science Foundation of China(21878009)。
文摘The work herein employed a rotating packed bed(RPB)to intensify the sulfonation process of 1,4-diaminoanthraquinone leuco(DL)in an attempt to improve the yield of the product 1,4-diaminoanthra quinone-2-sulfonic acid(DSA).First,the effects of operating conditions in a stirred tank reactor(STR),including stirring speed,chlorosulfonic acid/DL molar ratio(η),solvent/DL mass ratio(ζ),reaction temperature and dropping speed of chlorosulfonic acid,on the yield of DSA were investigated.The yield of DSA can reach 87.34%under the optimal operating conditions:stirring speed of 500 r·min^(-1),ηof 4.5,ζof 7,reaction temperature of 150℃,dropping speed of 0.61 ml·min^(-1).In addition,the kinetics of the sulfonation process via the shrinking core model revealed that the reaction is controlled by diffusion via a product layer under the reaction temperature of 140℃.Furthermore,the RPB was employed to intensify the mass transfer between liquid and solid phases during the sulfonation reaction process.The results showed that the DSA yield of 92.69%obtained by RPB was 5.35%higher than that by STR,indicating that RPB can significantly intensify the mass transfer in the liquid-solid phase sulfonation reaction process.
基金supported by the National Key Research and Development Program of China(2019YFA0210302)the National Natural Science Foundation of China(21878009).
文摘As one of the few renewable aromatic resources,the research of depolymerization of lignin into highvalue chemicals has attracted extensive attention in recent years.Catalytic wet aerobic oxidation(CWAO)is an effective technology to convert lignin like sodium lignosulfonate(SL),a lignin derivative,into aromatic aldehydes such as vanillin and syringaldehyde.However,how to improve the yield of aromatic aldehyde and conversion efficiency is still a challenge,and many operating conditions that significantly affect the yield of these aromatic compounds have rarely been investigated systematically.In this work,we adopted the stirred tank reactor(STR)for the CWAO process with nano-CuO as catalyst to achieve the conversion of SL into vanillin and syringaldehyde.The effect of operating conditions including reaction time,oxygen partial pressure,reaction temperature,SL concentration,rotational speed,catalyst amount,and NaOH concentration on the yield of single phenolic compound was systematically investigated.The results revealed that all these operating conditions exhibit a significant effect on the aromatic aldehyde yield.Therefore,they should be regulated in an optimal value to obtain high yield of these aldehydes.More importantly,the reaction kinetics of the lignin oxidation was explored.This work could provide basic data for the optimization and design of industrial operation of lignin oxidation.
基金supported by Tianjin Municipal Natural Science Foundation (21JCYBJC00600)。
文摘In this work, the solubility data of 9-fluorenone in 11 pure solvents(methanol, ethanol, n-propanol, isopropanol, n-butanol, iso-butanol, acetonitrile, ethyl formate, ethyl acetate, dimethyl sulfoxide, n-hexane)were measured by the gravimetric method from 278.15 K to 318.15 K under atmospheric pressure. The results showed that the solubility of 9-fluorenone in all tested solvents increased with the raised temperature. The solubility data were correlated by the modified Apelblat equation, λh model and NRTL(nonradom two fluid) model. The average relative deviation(ARD) correlated by three thermodynamic models in different solvents was all below 5%, which indicated that the three thermodynamic models fit the solubility data well. Furthermore, the mixing thermodynamic properties of 9-fluorenone in pure solvent systems were calculated via NRTL model. The results indicated the dissolution process of 9-fluorenone is spontaneous and entropically favorable. The solubility and the mixing thermodynamic properties provided in this paper would play an important role in industrial manufacture and follow-up operation of 9-fluorenone.
