为了提升硼粉的点火燃烧性能,采用高能球磨与喷雾干燥相结合的技术制备了4种微纳米B-Fe-Bi_(2)O_(3)@AP/PVDF复合物,根据其高热值和高燃烧效率的特点将四种复合物命名为μBHH_(c)、μBHC_(e)、nBHH_(c)及nBHC_(e),并对其形貌结构、热反...为了提升硼粉的点火燃烧性能,采用高能球磨与喷雾干燥相结合的技术制备了4种微纳米B-Fe-Bi_(2)O_(3)@AP/PVDF复合物,根据其高热值和高燃烧效率的特点将四种复合物命名为μBHH_(c)、μBHC_(e)、nBHH_(c)及nBHC_(e),并对其形貌结构、热反应性、点火延迟、质量燃速和凝聚相产物进行了表征分析。结果表明,μBHH_(c)和μBHC_(e)复合物在氩气中最大热值达9.7 k J·g^(-1),最高燃烧效率达66.2%;在氧气中最大热值达14.6 k J·g^(-1),最高燃烧效率达93.3%,空气中氧化峰温在750~760℃之间。n BHH_(c)和n BHC_(e)复合物在氩气中最大热值达9.9 k J·g^(-1),最高燃烧效率达68.9%;在氧气中最大热值达14.8 k J·g^(-1),最高燃烧效率达97.2%,空气中氧化峰温在595~600℃之间。各类复合物的最高燃烧温度达1954~2011℃,其中n BHH_(c)复合物的点火延迟最短(26 ms),且质量燃速最高(1.84 g·s^(-1));μBHC_(e)复合物的点火延迟最长(39 ms),质量燃速也最低(0.80 g·s^(-1))。各类复合物燃烧产物主要由B_(2)O_(3)、B_(4)C及少量未完全燃烧的硼组成,形貌包含5~10μm的球体及10~20μm的片状物质。展开更多
To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to succe...To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first time.The effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first time.The microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical propellant.Meanwhile,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.展开更多
The 2D sandwich model serves as a potent tool in exploring the influence of surface geometry on the combustion attributes of Ammonium perchlorate/Hydroxyl-terminated polybutadiene(AP/HTPB)propellant under rapid pressu...The 2D sandwich model serves as a potent tool in exploring the influence of surface geometry on the combustion attributes of Ammonium perchlorate/Hydroxyl-terminated polybutadiene(AP/HTPB)propellant under rapid pressure decay.The thickness of the sandwich propellant is derived from slicing the 3D random particle packing,an approach that enables a more effective examination of the micro-flame structure.Comparative analysis of the predicted burning characteristics has been performed with experimental studies.The findings demonstrate a reasonable agreement,thereby validating the precision and soundness of the model.Based on the typical rapid depressurization environment of solid rocket motor(initial combustion pressure is 3 MPa and the maximum depressurization rate is 1000 MPa/s).A-type(a flatter surface),B-type(AP recesses from the combustion surface),and C-type(AP protrudes from the combustion surface)propellant combustion processes are numerically simulated.Upon comparison of the evolution of gas-phase flame between 0.1 and 1 ms,it is discerned that the flame strength and form created by the three sandwich models differ significantly at the beginning stage of depressurization,with the flame structures gradually becoming harmonized over time.Conclusions are drawn by comparison extinction times:the surface geometry plays a pivotal role in the combustion process,with AP protrusion favoring combustion the most.展开更多
The stratification phenomenon resulting from differences in the physical properties of solid-liquid components seriously affect the final combustion and explosion characteristics of mixed fuel under the action of osci...The stratification phenomenon resulting from differences in the physical properties of solid-liquid components seriously affect the final combustion and explosion characteristics of mixed fuel under the action of oscillation.The effects of oscillation on the physical stability of mixed fuel with two solid-liquid ratios and three liquid component distribution ratios have been investigated using a self-designed experimental system at oscillation frequencies of 60-300 r/min.The explosion characteristics of mixed fuel before and after oscillation are gained from a 20 L spherical explosion container system.When the mass ratio of liquid components is controlled at 66.9%,64.7%,62.6%the final explosion characteristics are stable,with a maximum difference of only 0.71%.The volume of liquid fuel precipitation increases with increasing oscillation frequency when the mass ratio of liquid components reaches 71.7%,69.6%,67.7%.The fuel explosion overpressure after oscillation decreases with increasing liquid precipitation volume,and the repeatability is poor,with a maximum standard deviation of 82.736,which is much higher than the ratio without stratification.Properly controlling the mass ratio of liquid components of the mixed fuel can effectively combat the impact of oscillation on the physical state and maintain the stability of the final explosion characteristics.展开更多
文摘为了提升硼粉的点火燃烧性能,采用高能球磨与喷雾干燥相结合的技术制备了4种微纳米B-Fe-Bi_(2)O_(3)@AP/PVDF复合物,根据其高热值和高燃烧效率的特点将四种复合物命名为μBHH_(c)、μBHC_(e)、nBHH_(c)及nBHC_(e),并对其形貌结构、热反应性、点火延迟、质量燃速和凝聚相产物进行了表征分析。结果表明,μBHH_(c)和μBHC_(e)复合物在氩气中最大热值达9.7 k J·g^(-1),最高燃烧效率达66.2%;在氧气中最大热值达14.6 k J·g^(-1),最高燃烧效率达93.3%,空气中氧化峰温在750~760℃之间。n BHH_(c)和n BHC_(e)复合物在氩气中最大热值达9.9 k J·g^(-1),最高燃烧效率达68.9%;在氧气中最大热值达14.8 k J·g^(-1),最高燃烧效率达97.2%,空气中氧化峰温在595~600℃之间。各类复合物的最高燃烧温度达1954~2011℃,其中n BHH_(c)复合物的点火延迟最短(26 ms),且质量燃速最高(1.84 g·s^(-1));μBHC_(e)复合物的点火延迟最长(39 ms),质量燃速也最低(0.80 g·s^(-1))。各类复合物燃烧产物主要由B_(2)O_(3)、B_(4)C及少量未完全燃烧的硼组成,形貌包含5~10μm的球体及10~20μm的片状物质。
基金supported by the National Natural Science Foundation of China (Grant No.22005143)Young Elite Scientists Sponsorship Program by CAST (Grant No.2022QNRC001)。
文摘To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first time.The effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first time.The microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical propellant.Meanwhile,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.
基金supported by the National Natural Science Foundation of China(Grant No.51176076)。
文摘The 2D sandwich model serves as a potent tool in exploring the influence of surface geometry on the combustion attributes of Ammonium perchlorate/Hydroxyl-terminated polybutadiene(AP/HTPB)propellant under rapid pressure decay.The thickness of the sandwich propellant is derived from slicing the 3D random particle packing,an approach that enables a more effective examination of the micro-flame structure.Comparative analysis of the predicted burning characteristics has been performed with experimental studies.The findings demonstrate a reasonable agreement,thereby validating the precision and soundness of the model.Based on the typical rapid depressurization environment of solid rocket motor(initial combustion pressure is 3 MPa and the maximum depressurization rate is 1000 MPa/s).A-type(a flatter surface),B-type(AP recesses from the combustion surface),and C-type(AP protrudes from the combustion surface)propellant combustion processes are numerically simulated.Upon comparison of the evolution of gas-phase flame between 0.1 and 1 ms,it is discerned that the flame strength and form created by the three sandwich models differ significantly at the beginning stage of depressurization,with the flame structures gradually becoming harmonized over time.Conclusions are drawn by comparison extinction times:the surface geometry plays a pivotal role in the combustion process,with AP protrusion favoring combustion the most.
文摘The stratification phenomenon resulting from differences in the physical properties of solid-liquid components seriously affect the final combustion and explosion characteristics of mixed fuel under the action of oscillation.The effects of oscillation on the physical stability of mixed fuel with two solid-liquid ratios and three liquid component distribution ratios have been investigated using a self-designed experimental system at oscillation frequencies of 60-300 r/min.The explosion characteristics of mixed fuel before and after oscillation are gained from a 20 L spherical explosion container system.When the mass ratio of liquid components is controlled at 66.9%,64.7%,62.6%the final explosion characteristics are stable,with a maximum difference of only 0.71%.The volume of liquid fuel precipitation increases with increasing oscillation frequency when the mass ratio of liquid components reaches 71.7%,69.6%,67.7%.The fuel explosion overpressure after oscillation decreases with increasing liquid precipitation volume,and the repeatability is poor,with a maximum standard deviation of 82.736,which is much higher than the ratio without stratification.Properly controlling the mass ratio of liquid components of the mixed fuel can effectively combat the impact of oscillation on the physical state and maintain the stability of the final explosion characteristics.
