Application of Drawing CAI in Teaching

This article introduces the system and application of teaching software Of 《Key to theExercises of Mechanical Drawing》 (will soon be published by the High Education publishingHouse). In general, CAI software is intended to be used for watching and listening, but can't beoperated personally. In order to improve the teaching effect, we introduce interactive capabilities intothe software, give students the opportunities of doing hands-on practice, increase the informationcontent of teaching in unit time, and leave more thinking face for students.

Optimizing Real-Time Performance of 3D Virtual Mining Environment with MultiGen Creator

System optimization plays a crucial role in developing VR system after 3D modeling, affecting the system's Immersion and Interaction performance enormously. In this article, several key techniques of optimizing a virtual mining system were discussed: optimizing 3D models to keep the polygon number in VR system within target hardware's processing ability; optimizing texture database to save texture memory with perfect visual effect; optimizing database hierarchy structure to accelerate model retrieval; and optimizing LOD hierarchy structure to speed up rendering.

Numerical Simulation of Injection Molding Cooling Process Based on 3D Surface Model

The design of the cooling system of injection molds directly affects both productivity and the quality of the final part. Using the cooling process CAE system to instruct the mold design, the efficiency and quality of design can be improved greatly. At the same time, it is helpful to confirm the cooling system structure and optimize the process conditions. In this paper, the 3D surface model of mold cavity is used to replace the middle-plane model in the simulation by Boundary Element Method, which break the bottleneck of the application of the injection molding simulation softwares base on the middle-plane model. With the improvements of this paper, a practical and commercial simulation software of injection molding cooling process named as HsCAE3D6.0 is developed.

The Study of RAIM Performance by Simulation

Receiver Autonomous Integrity Monitoring （RAIM） is a software algorithm available in some GPS receivers which gives an indication if the position solution given by the GPS receiver is suitable to use. The detail algorithm of the parity space method of RAIM technique is presented. Using FDI and FDE methods, the simulations of RAIM performance have been done in three different phases independently with respect to the bias of the fault satellite. Case study of simulation results is discussed and each performance of RAIM is analyzed. According to the analysis of simulation results, the parity space method of RAIM can meet the integrity requirements for nonprecision, terminal and enroute flight phase. It also indicates that the results of performance of FDE are better than that of FDI.

The 3D Modeling of Blades of Multiphase Flow Helico-Axial Pump's Rotor Based on Solidworks

The structure of multiphase flow helico-axial pump＇s rotor and how to model the rotor, especially the blades of the rotor, based on the Solidworks software. More important, the principle of the blade design is mainly introduced. Under the guide of the principle, the 3D coordinates of the blade data points can be got by matlab programming. In the paper, the design step and the modeling step are particularly described through a concrete example.

Hibernate Combined TableViewer in the Application of Medicines Inventory Management System

To solve the data persistence problem in the management system, this paper used the popular object-relational mapping framework Hibernate to achieve the persistence layer which in a medicines inventory management system. This paper described the advantages and principles of the Hibernate, and then showed the written work of the configuration files, mapping files, persistent classes, etc. Finally, the paper showed how to display the specific data information in the TableViewer based on the Eclipse RCP framework. It is observed that, operating the objects in the Hibernate framework is more flexible and efficient than using JDBC directly. Ad in addition, the application based on Eclipse RCP framework can take over many excellent features of Eclipse, and the developers can improve their efficiency by these features.

A New Design of Student Apartment Bed Based on Kansei Engineering and Ergonomics

Aiming at the defects of the products available on the market at present and basing on the Kansei Engineering and Ergonomics, a new kind of student apartment bed which can prove its humanity more clearly is designed, and its design direction is gotten through the questionnaire and the design starts from the real actual needs of students. After the original design was finished, the later investigation on the students was engaged with and made the engineering analysis. The conclusion is that the sum of ＂perfect＂ and ＂good＂ membership rates is up to 64%, hence the comprehensive assessment of the design is perfect. That is to say, this design is able to realize and meet the needs of users, and there is no doubt that it will have a good business prospects.

The combination of user centered design and industrial design: Balance between subjective and objective design

Traditional Industrial Design has been an important aspect in the New Product Development process within the last dec- ades. User centered design is a growing research field for product innovation which needs support from both design knowledge and research methodologies. Both TID and UCD focus on user＇s perspective when doing multi-disciplinary work. They take care of style, usability, and balancing the users need and reality. The skills from TID help design expression and realization to communicate effi- ciently with other participants by informative images and real prototypes. The methods from UCD help the idea generation and op- portunity discoveries by facilitating workshops and conducting interview with participants. TID and UCD represent different per- spectives of the subjective and the objective respectively.

A noise removal algorithm for DR Images based on adaptive estimation of threshold

When DR （Digital Radiography） images are filtered, it is necessary to preserve the edges and key details. But the existing methods may inevitably take fine details mistaken for noise to remove. In order to solve the problem an improved anisotropic diffu- sion filtering model is proposed. Firstly, a novel diffusion function is introduced based on Perona and Malik model, which well overcomes the high rate of convergence. Secondly, the gradient threshold is modified to an adaptive estimation function, so it is bet- ter at adaptive threshold regulations according to the pixels and iteration times. Finally, the edges are extracted from the restored im- ages and the results are evaluated quantificationally. It is shown from the experiments that the proposed method is effective not only in noise reduction but also in details preserved.

A research on the contact stress of roller bearing based on crowning analysis

According to elastic contact theory, contact model between roller and race is established. Compared with the Hertz results, the results are proved, based on which contact stress distribution of different crowning and initial contact length is given, then the appropriate value is derived. On the basis, inertia force and different radial force is given into consideration. Via analysis, it con- cludes that under balanced pure radial load condition the largest contact stress between roller and race increases along with crowning value increasing. With the same crowning value, the largest contact stress between roller and race decreases in the first and increases at the end along with initial contact length increasing. Contact stress between roller and outer race increases along with revolution speed increasing.

Parameter Selection and Performance Analysis of Mobile Terminal Models Based on Unity3D

Mobile platform is now widely seen as a promising multimedia service with a favorable user group and market prospect. To study the influence of mobile terminal models on the quality of scene roaming, a parameter setting platform of mobile terminal models is established to select the parameter selection and performance index on different mobile platforms in this paper. This test platform is established based on model optimality principle, analyzing the performance curve of mobile terminals in different scene models and then deducing the external parameter of model establishment. Simulation results prove that the established test platform is able to analyze the parameter and performance matching list of a mobile terminal model.

Finite element analysis of shape control for continuous hot rolling mills of super wide strip steel

The efficacy of shape control is the core of this technology and the main basis of automatic shape control system model designing. This passage constructs the three-dimensional elastic deformation model of CVCplus roll system in 2250 mm hot rolling mill. Comparing and analyzing different influence of working factors on control characteristic, the shape control characteristic of CVCplus roll system in its whole work time is studied, and the cause is analyzed and the difference of the roll gap curve and crown adjustable area in early and latter work time is compared. The outcome has crucial meaning in both theory and production.

Optimal design of the link lengths for a planar parallel manipulator

This paper addresses geometry design of a new kind of 2-DOF parallel manipulator actuated horizontally by linear actua- tors. The first step of the optimum design involves developing a non-dimensional structure of the planar 2-DOF parallel manipulator. The global conditioning index, global velocity index, global stiffness index and global payload index of the 2-DOF parallel manipu- lators are investigated, and the geometrical parameters without dimension are determined with respect to the specification on per- formances. Finally, based on the optimum non-dimensional result, the optimum dimensional parameters are achieved which is suit- able for the desired workspace. The optimum methodology of this paper is convenient and can be extended to other parallel mecha-

Conception Innovation Design System Based on PDM Framework

The system is based on the globally shared product model conforming to VRML Standard, and uses SmarTeam (PDM) system to integrate and encapsulate CAD, CAE and other application software for product development. The system takes sugarcane harvester? mobile telephone design analysis and evaluation as an example, and utilizes fuzzy evaluation principle to evaluate the design and simulation analysis results for decisions making. The platform provides a collaborative intelligent environment for the design of products, aiming at integrating people, process and data in the virtual product development. The multi-layered system architecture provides capability for KBM and conception innovation design process with a single unified data and process model so as to achieve true process streamlining and data integrity throughout the entire product development lifecycle, and hence improves enterprises efficiency.

A Method of Digitally Reconstructed Radiographs Based on Medical CT Images

A complete and detail method is described to get digitally reconstructed radiographs （DRRs）. Casting rays to traverse CT images, computing CT values of resample points by interpolation, then converting CT value to its attenuation coefficient by using simplified segment function. Finally, DRRs enhancement is made to get the better display of region of interest （ROI）, and a new way is adopted to adjust the customization coefficient. The experimental results show that the proposed method is effective in generating the satisfied DRRs.

Fuzzy Identification Based on Tire/Road Adhesion Feature

For identifying the tire/road friction coefficient accurately in real-time to meet the needs of automobile electronic control system and then improving the active safety performance of automobile, the road recognition method based on fuzzy control algorithm was studied in this paper. Adopt a 7-DOF vehicle dynamic model, wheel slip ratio 2 and longitudinal forces Fx as the input of fuzzy controller with fuzzy rules was proposed. The output is the weight coefficient of p-2 functional expression which is related to cl, c2 and c3 proposed by Burckhardt etc. By a simulation experiment of automobile brake on the condition of driving straight or veering on a single road and docking pavement, to some extent, indicates that this method is able to guarantee the real-time and accuracy of the road identification.

Slicing 3D CAD Model Directly with ObjectARX

An algorithm for compensating the varying section contour within the extent of each layer thickness is proposed to improve the rapid prototyping part’s shape and size precision.

Analysis of the method on industrial design guided by individual spontaneous behavior

There is a close relationship between individual spontaneous behavior and Industrial design. As individual spontaneous behavior can sent especial meaning for industrial design, there is a great necessity for creating design guided by this behavior. The design method carries out in four steps, first step is to focus on the analysis of individual action phase, pay attention to the explora- tion of the relationship between actions and tool ,and then list the importance order in the action phase, the third step is to take out the in-depth anatomical analysis of the stage, analyze the reason of the operational difficulty .and at last carries out the design concept to resolve the problem. All in all, this method revolves around the main stage of spontaneous behavior, and analyzes it in interim and solves the problem in stage.

The Coherence Cube Computing Method with Self-adaptive Time Window Based on Wavelet Transform

The coherence cube technology has become an important technology for the seismic attribute interpretation, which extracts the discontinuities of the events through analyzing the similarities of adjacent seismic channels to identify the fault form. The coherence cube technology which uses constant time window lengths can not balance the shallow layers and the deep layers, because the frequency band of seismic data varies with time. When analyzing the shallow layers, the time window will crossover a lot of events, which will lead to weak focusing ability and failure to delineate the details. While the time window will not be long enough for analyzing deep layers, which will lead to low accuracy because the coherences near the zero points of the events are heavily influenced by noise. For solving the problem, we should make a research on the coherence cube technology with self-adaptive time window. This paper determines the sample points＆#39; time window lengths in real time by computing the instantaneous frequency bands with Wavelet Transformation, which gives a coherence computing method with the self-adaptive time window lengths. The result shows that the coherence cube technology with self-adaptive time window based on Wavelet Transformation improves the accuracy of fault identification, and supresses the noise effectively. The method combines the advantages of long time window method and short time window method.