Development of Integrated and Intelligent Geodetic and Photogrammetry Satellites with Corresponding Key Technologies

Aerospace surveying and mapping has become the main method of global earth observation.It can be divided into the geodetic observation satellites and the topographic surveying satellites according to the disciplines.In this paper,the geodetic satellites and photographic satellites are introduced respectively.Then,the existing problems in Chinese earth observation satellites are analyzed,and the comprehensive satellite with integrated payloads,the intensive microsatellite constellation and the intelligent observation satellite are proposed as three different development ideas for the future earth observation satellites.The possibility of the three ideas is discussed in detail,as well as the related key technologies.

Multi-task Learning of Semantic Segmentation and Height Estimation for Multi-modal Remote Sensing Images

Deep learning based methods have been successfully applied to semantic segmentation of optical remote sensing images.However,as more and more remote sensing data is available,it is a new challenge to comprehensively utilize multi-modal remote sensing data to break through the performance bottleneck of single-modal interpretation.In addition,semantic segmentation and height estimation in remote sensing data are two tasks with strong correlation,but existing methods usually study individual tasks separately,which leads to high computational resource overhead.To this end,we propose a Multi-Task learning framework for Multi-Modal remote sensing images(MM_MT).Specifically,we design a Cross-Modal Feature Fusion(CMFF)method,which aggregates complementary information of different modalities to improve the accuracy of semantic segmentation and height estimation.Besides,a dual-stream multi-task learning method is introduced for Joint Semantic Segmentation and Height Estimation(JSSHE),extracting common features in a shared network to save time and resources,and then learning task-specific features in two task branches.Experimental results on the public multi-modal remote sensing image dataset Potsdam show that compared to training two tasks independently,multi-task learning saves 20%of training time and achieves competitive performance with mIoU of 83.02%for semantic segmentation and accuracy of 95.26%for height estimation.

A Hybrid Features Based Detection Method for Inshore Ship Targets in SAR Imagery

Convolutional Neural Networks(CNNs)have recently attracted much attention in the ship detection from Synthetic Aperture Radar(SAR)images.However,compared with optical images,SAR ones are hard to understand.Moreover,due to the high similarity between the man-made targets near shore and inshore ships,the classical methods are unable to achieve effective detection of inshore ships.To mitigate the influence of onshore ship-like objects,this paper proposes an inshore ship detection method in SAR images by using hybrid features.Firstly,the sea-land segmentation is applied in the pre-processing to exclude obvious land regions from SAR images.Then,a CNN model is designed to extract deep features for identifying potential ship targets in both inshore and offshore water.On this basis,the high-energy point number of amplitude spectrum is further introduced as an important and delicate feature to suppress false alarms left.Finally,to verify the effectiveness of the proposed method,numerical and comparative studies are carried out in experiments on Sentinel-1 SAR images.

Disordered Multi-view Registration Method Based on the Soft Trimmed Deep Network

Compared with the pair-wise registration of point clouds,multi-view point cloud registration is much less studied.In this dissertation,a disordered multi-view point cloud registration method based on the soft trimmed deep network is proposed.In this method,firstly,the expression ability of feature extraction module is improved and the registration accuracy is increased by enhancing feature extraction network with the point pair feature.Secondly,neighborhood and angle similarities are used to measure the consistency of candidate points to surrounding neighborhoods.By combining distance consistency and high dimensional feature consistency,our network introduces the confidence estimation module of registration,so the point cloud trimmed problem can be converted to candidate for the degree of confidence estimation problem,achieving the pair-wise registration of partially overlapping point clouds.Thirdly,the results from pair-wise registration are fed into the model fusion to achieve the rough registration of multi-view point clouds.Finally,the hierarchical clustering is used to iteratively optimize the clustering center model by gradually increasing the number of clustering categories and performing clustering and registration alternately.This method achieves rough point cloud registration quickly in the early stage,improves the accuracy of multi-view point cloud registration in the later stage,and makes full use of global information to achieve robust and accurate multi-view registration without initial value.

CFM-UNet:A Joint CNN and Transformer Network via Cross Feature Modulation for Remote Sensing Images Segmentation

The semantic segmentation methods based on CNN have made great progress,but there are still some shortcomings in the application of remote sensing images segmentation,such as the small receptive field can not effectively capture global context.In order to solve this problem,this paper proposes a hybrid model based on ResNet50 and swin transformer to directly capture long-range dependence,which fuses features through Cross Feature Modulation Module(CFMM).Experimental results on two publicly available datasets,Vaihingen and Potsdam,are mIoU of 70.27%and 76.63%,respectively.Thus,CFM-UNet can maintain a high segmentation performance compared with other competitive networks.

Recent Advances in the Geodesy Data Processing

Geodetic functional models,stochastic models,and model parameter estimation theory are fundamental for geodetic data processing.In the past five years,through the unremitting efforts of Chinese scholars in the field of geodetic data processing,according to the application and practice of geodesy,they have made significant contributions in the fields of hypothesis testing theory,un-modeled error,outlier detection,and robust estimation,variance component estimation,complex least squares,and ill-posed problems treatment.Many functional models such as the nonlinear adjustment model,EIV model,and mixed additive and multiplicative random error model are also constructed and improved.Geodetic data inversion is an important part of geodetic data processing,and Chinese scholars have done a lot of work in geodetic data inversion in the past five years,such as seismic slide distribution inversion,intelligent inversion algorithm,multi-source data joint inversion,water reserve change and satellite gravity inversion.This paper introduces the achievements of Chinese scholars in the field of geodetic data processing in the past five years,analyzes the methods used by scholars and the problems solved,and looks forward to the unsolved problems in geodetic data processing and the direction that needs further research in the future.

The Progress of IGS Analysis Center at Wuhan University

As one of the Analysis Centers(AC)of the International GNSS Service(IGS),Wuhan University(WHU)has been contributing to the IGS by providing ultra-rapid as well as rapid orbit and clock solutions for the established GPS and GLONASS since 2012.In the same year,the IGS initiated the Multi-GNSS Experiment(MGEX)to support the analysis of the emerging GNSS systems and prepare the IGS for Multi-GNSS,which includes GPS,GLONASS,the European Galileo system,the Chinese Beidou Navigation Satellite System(BDS),the Japanese Quasi-Zenith Satellite System(QZSS)and the Indian Regional Navigation Satellite System(IRNSS/NaVIC).The major products,i.e.,orbits,Earth Orientation Parameters(EOPs),satellite clock as well as attitude have also been provided by WHU since 2012.More recently,WHU has engaged the third reprocessing of IGS for generating the highly accurate station coordinates as inputs for establishment of the International Terrestrial Reference Frame(ITRF)2020 during 2019—2020.This article presents the recent major advancements of the IGS AC at Wuhan University,including precise products,real-time products,bias products,antenna phase center calibration,and the non-linear motion modeling for GNSS Reference Stations.

Analysis of Anomalous Enhancement in TEC and Electron Density in the China Region Prior to the 17 March 2015 Geomagnetic Storm Based on Ground and Space Observations

Total Electron Content(TEC)and electron density enhancement were observed on the day before 17 March 2015 great storm in the China Region.Observations from ground-and space-based instruments are used to investigate the temporal and spatial evolution of the pre-storm enhancement.TEC enhancement was observed from 24°N to 30°N after 10:00 UT at 105°E,110°E and 115°E longitudes on March 16.The maximum magnitude of TEC enhancement was more than 10 TECU and the maximal relative TEC enhancement exceeded 30%.Compared with geomagnetic quiet days,the electron density of Equatorial Ionization Anomaly(EIA)northern peak from Swarm A/C satellites on March 16 was larger and at higher latitudes.NmF2 enhanced during 11:30—21:00 UT at Shaoyang Station and increased by 200%at~16:00 UT.However,TEC and electron density enhancement were not accompanied by a significant change of hmF2.Most research has excluded some potential mechanisms as the main driving factors for storm-time density enhancements by establishing observational constraints.In this paper,we observed pre-storm enhancement in electron density at different altitudes and Equatorial Electrojet(EEJ)strength results derived from ground magnetometers observations suggest an enhanced eastward electric field from the E region probably played a significant role in this event.

Precise Positioning Method for Seafloor Geodetic Stations Based on the Temporal Variation of Sound Speed Structure

At present,GNSS-Acoustic(GNSS-A)combined technology is widely used in positioning for seafloor geodetic stations.Based on Sound Velocity Profiles(SVPs)data,the equal gradient acoustic ray-tracing method is applied in high-precision position inversion.However,because of the discreteness of the SVPs used in the forementioned method,it ignores the continuous variation of sound velocity structure in time domain,which worsens the positioning accuracy.In this study,the time-domain variation of Sound Speed Structure(SSS)has been considered,and the cubic B-spline function is applied to characterize the perturbed sound velocity.Based on the ray-tracing theory,an inversion model of“stepwise iteration&progressive corrections”for both positioning and sound speed information is proposed,which conducts the gradual correction of seafloor geodetic station coordinates and disturbed sound velocity.The practical data was used to test the effectiveness of our method.The results show that the Root Mean Square(RMS)errors of the residual values of the traditional methods without sound velocity correction,based on quadratic polynomial correction and based on cubic B-spline function correction are 1.43 ms,0.44 ms and 0.21 ms,respectively.The inversion model with sound velocity correction can effectively eliminate the systematic error caused by the change of SSS,and significantly improve the positioning accuracy of the seafloor geodetic stations.

A Self-calibration Bundle Adjustment Algorithm Based on Block Matrix Cholesky Decomposition Technology

In this study,the problem of bundle adjustment was revisited,and a novel algorithm based on block matrix Cholesky decomposition was proposed to solve the thorny problem of self-calibration bundle adjustment.The innovation points are reflected in the following aspects:①The proposed algorithm is not dependent on the Schur complement,and the calculation process is simple and clear;②The complexities of time and space tend to O(n)in the context of world point number is far greater than that of images and cameras,so the calculation magnitude and memory consumption can be reduced significantly;③The proposed algorithm can carry out self-calibration bundle adjustment in single-camera,multi-camera,and variable-camera modes;④Some measures are employed to improve the optimization effects.Experimental tests showed that the proposed algorithm has the ability to achieve state-of-the-art performance in accuracy and robustness,and it has a strong adaptability as well,because the optimized results are accurate and robust even if the initial values have large deviations from the truth.This study could provide theoretical guidance and technical support for the image-based positioning and 3D reconstruction in the fields of photogrammetry,computer vision and robotics.

Suppression of Plasma Bubbles over South America under Weak Geomagnetic Perturbations

During a long-term Equatorial Plasma Bubbles(EPBs)occurrence between October 2020 and March 2021,a significant EPB suppression event was identified on November 22 and the observations from multi-instrument have been utilized to investigate this event.Global-scale Observations of the Limb and Disk(GOLD)satellite observed prominent EPBs between 23:40 UT and 23:55 UT during the long-term occurrence days.However,no dark stripes representing EPBs were observed on November 22,and the Equatorial Ionization Anomaly(EIA)structure remained intact.The Total Electron Content(TEC)maps show that these EPBs appeared in the region between 35°W and 65°W longitudes and the magnitudes of the TEC loss in EPBs regions were about 20 TECU.Except for 22 November,the S4 index was consistently greater than 0.6 throughout November,indicating significant ionospheric scintillation.The Rate Of TEC Index(ROTI)maps revealed that the spatial extent and intensity of EPBs increased after their suppression,and the EPBs were locally generated.The swarm electron density measurements indicated that the variation amplitudes of EPBs at 510 km altitude were approximately 3 to 5 times larger than that at 460 km altitude.The impact region of EPBs at 510 km was between 15°S and 20°N latitudes,while at 460 km,it was between 0°and 17°N latitudes.During the period of EPB suppression,the average h’f at three ionosonde stations decreased by about 50 km,and the vertical drift velocity(V z)approached~0 m/s while it was more than 20 m/s during the long-term occurrence.

Evalution of the Accuracy and Performance of Multi-GNSS(MGEX)Positioning for Long Baselines by Using Different Software

The Global Positioning System(GPS)is a GNSS constellation,but GNSS is not always GPS.GPS is one of the GNSS constellations used around the world.The GNSS constellations include GPS(US),QZSS(Japan),Beidou/BDS(China),Galileo(EU),and GLONASS(Russia).In 1999,the European Commission(EC)proposed the European Galileo satellite navigation system for the first time.A four-phase development was proposed,including public and private sector finance.Galileo was intended for both civilian and government use,and is managed and controlled by civil authorities.Galileo is made up of 30 satellites,a number of globally distributed ground stations,and a ground control and monitoring system,all of which are extremely similar to the structure,format,and layout of GPS.In this study,we investigate GPS/GLONASS/Galileo/Beidou/IRNSS/QZSS Navigation Satellite System integration algorithm for long baselines ranging from 1500 km to 3000 km in China,Japan and Mongolia.The positioning performance with GPS/GLONASS/Galileo/BDS/IRNSS/QZSS,GPS-only,Galileo-only,GLONASS-only and BDS-only,etc.is compared in terms of the positioning accuracy.An improvement of positioning accuracy over long baselines can be found with GPS/GLONASS/Galileo/BDS/QZSS/IRNSS compared with that of GPS-only and that of BDS-only.The obtained differences of the two baselines(Topcon Magnet Tools Software(Multi-GNSS)-(CSRS-PPP(GPS/GLONASS),(Trimble-RTX(GPS/GLONASS),(AUSPOS(GPS/GLONASS))Online Processing Software)by using GPS/GLONASS/Galileo/BDS/QZSS/IRNSS signals is between 40 cm and 111.5 cm on three days.

Chinese Gravimetry Augment and Mass Change Exploring Mission Status and Future

The satellite gravimetry technology effectively recovers the global Earth’s gravity field.Since 2000s,HL-SST satellite CHAMP,LL-SST satellite GRACE,Gravity Gradient Measurement(GGM)satellite GOCE have been launched successfully,producing some Earth’s gravity models solely from satellites data.However,the space and time resolution of the Earth’s gravity fields do not adequately satisfy scientific objectives.The main reason is that the gravimetry satellites are not enough and observation data insufficient.The paper outlines the current and future status of Chinese gravity satellite missions.The Chinese gravimetry satellite system,named Chinese Gravimetry augment and Mass change exploring mission(ChiGaM),successfully launched in Dec.2021 after four years of production and over a year of calibration and valiation.The accelerometer,K-band ranging system and the three stellar sensors,among others,were precisely calibrated and trimmed.The satellite mass center was determined and coordinated with the proof center of accelerometer with an accuracy 100μm.The inter-satellite ranging system and BDS/GPS receiver operate together seamlessly.The range and range rate noise is less than 3μm/Hz^(1/2) and 1μm/s/Hz^(1/2),respectively,in band of 0.025~0.1 Hz.The electrostatic suspension accelerometer is working well.Its high-sensitive axis noise level is 3×10^(-10) m/s^(2)/Hz^(1/2)near the frequency 0.1 Hz,and 1×10^(-9) m/s^(2)/Hz^(1/2) for the less-sensitive axis.Meanwhile the BDS/GPS receiver is used to achieve data for precise orbit determination,yielding an orbit result with accuracy better than 2 cm.When compared with KBR observations,the RMS of the bias is less than 1 mm.Besides above mission,next gravimetric satellite is being developed now.TQ-2 mission is designed as a totally experimental satellite for gravitational wave detection at low Earth orbit,which can detect the Earth’s gravity field simultaneously.The Bender-type mission is considered the most promising configuration for TQ-2 and consists of two polar satellites and two inclined satellites.Due to the extra observations at the east-west direction derived from the inclined satellite pair,significant improvements has been made in detecting temporal signals with higher accuracy and spatial-temporal resolution.To achieve the scientific goal,the ACC MBW can shift from 0.001~0.1 Hz to 0.004~0.1 Hz for ACC,and the LRI MBW can shift from 0.01~1 Hz to 0.1~1 Hz.For future research,a gravimetric potential survey using cold-atomic-clock based on the general relativity theory,cold atom gradiometer should be pursued.Gravimetric technologies should be mined and researched,and the gravimetry satellite constellation should be developed,so as to improve the time resolution and space resolution for meeting the requirements of geophysics,geodesy,earthquake,water resources environment,oceanography,etc.

An Edge-assisted, Object-oriented Random Forest Approach for Refined Extraction of Tea Plantations Using Multi-temporal Sentinel-2 and High-resolution Gaofen-2 Imagery

As a consumed and influential natural plant beverage,tea is widely planted in subtropical and tropical areas all over the world.Affected by(sub)tropical climate characteristics,the underlying surface of the tea distribution area is extremely complex,with a variety of vegetation types.In addition,tea distribution is scattered and fragmentized in most of China.Therefore,it is difficult to obtain accurate tea information based on coarse resolution remote sensing data and existing feature extraction methods.This study proposed a boundary-enhanced,object-oriented random forest method on the basis of high-resolution GF-2 and multi-temporal Sentinel-2 data.This method uses multispectral indexes,textures,vegetable indices,and variation characteristics of time-series NDVI from the multi-temporal Sentinel-2 imageries to obtain abundant features related to the growth of tea plantations.To reduce feature redundancy and computation time,the feature elimination algorithm based on Mean Decrease Accuracy(MDA)was used to generate the optimal feature set.Considering the serious boundary inconsistency problem caused by the complex and fragmented land cover types,high resolution GF-2 image was segmented based on the MultiResolution Segmentation(MRS)algorithm to assist the segmentation of Sentinel-2,which contributes to delineating meaningful objects and enhancing the reliability of the boundary for tea plantations.Finally,the object-oriented random forest method was utilized to extract the tea information based on the optimal feature combination in the Jingmai Mountain,Yunnan Province.The resulting tea plantation map had high accuracy,with a 95.38%overall accuracy and 0.91 kappa coefficient.We conclude that the proposed method is effective for mapping tea plantations in high heterogeneity mountainous areas and has the potential for mapping tea plantations in large areas.

Recent Progress on Hydrogeodesy in China

Modern geodetic technologies,including high-precision ground-based gravity measurements,satellite gravimetry,satellite altimetry,Global Navigation Satellite Systems(GNSS),and Interferometric Synthetic Aperture Radar(InSAR),offer a wealth of observations for monitoring global hydrological processes with exceptional accuracy and spatio-temporal resolutions.Mass redistribution and Earth’s surface deformation over land related to global and regional water cycling can be inferred from modern gravimetry,altimetry,GNSS,and InSAR techniques.Hydrogeodesy becomes an emerging field of geodesy aiming to analyze the changes of water in the Earth system.The paper introduces the China’s advances in hydrogeodesy in recent years.It brings together multiple geodetic teams’work from China,showcasing the application of modern geodetic technologies in the field of hydrology,including research on terrestrial water storage,groundwater storage,glaciers/ice sheets,and reservoir water storage.

The Deformation Analysis of the 3D Alignment Control Network Based on the Multiple Congruence Models

In the construction and maintenance of particle accelerators,all the accelerator elements should be installed in the same coordinate system,only in this way could the devices in the actual world be consistent with the design drawings.However,with the occurrence of the movements of the reinforced concrete cover plates at short notice or building deformations in the long term,the control points upon the engineering structure will be displaced,and the fitness between the subnetwork and the global control network may be irresponsible.Therefore,it is necessary to evaluate the deformations of the 3D alignment control network.Different from the extant investigations,in this paper,to characterize the deformations of the control network,all of the congruent models between the points measured in different epochs have been identified,and the congruence model with the most control points is considered as the primary or fundamental model,the remaining models are recognized as the additional ones.Furthermore,the discrepancies between the primary S-transformation parameters and the additional S-transformation parameters can reflect the relative movements of the additional congruence models.Both the iterative GCT method and the iterative combinatorial theory are proposed to detect multiple congruence models in the control network.Considering the actual work of the alignment,it is essential to identify the competitive models in the monitoring network,which can provide us a hint that,even the fitness between the subnetwork and the global control network is good,there are still deformations which may be ignored.The numerical experiments show that the suggested approaches can describe the deformation of the 3D alignment control network roundly.

Maintenance of Millimeter-level Geodetic Reference Framework

The high-precision terrestrial reference frame,as the spatial benchmark for geodesy,is an important national infrastructure.However,due to the influence of nonlinear factors related to geophysical phenomena,the overall maintenance accuracy of the ITRF framework is still at the centimeter level.Therefore,accurately characterizing the true trajectories of linear motion,nonlinear motion,and geocentric motion of the reference station is the key to achieve the construction and maintenance technology of a millimeter level terrestrial reference framework.Based on long-term global and regional GNSS observation data,more Chinese geodesy scientists devoted much efforts to the maintenance of millimeter-level geodetic reference framework.The main contributions of this work included the followings:①Dynamic maintenance of millimeter-level terrestrial reference frame;②Research progress on the method of maintenance of regional reference frame based on GNSS;③The progress of CGCS2000 frame maintenance in millimeter level accuracy;④Reprocessing and reanalysis of two-decade GNSS observation in continental China;⑤Research on current GNSS velocity field model and deformation in Chinese mainland;⑥The preliminary realization and evaluation of CTRF2020.

Using WGM2012 to Compute Gravity Anomaly Corrections of Leveling Observations in China

Gravity Anomaly Correction(GAC)is a very important term in leveling data processing.In most cases,it is troublesome for field surveyors to measure gravity when leveling.In this paper,based on the complete Bouguer Gravity Anomaly(BGA)map of WGM2012,the feasibility of replacing in-situ gravity surveying in China is investigated.For leveling application,that is to evaluate the accuracy of WGM2012 in China.Because WGM2012 is organized with a standard rectangle grid,two interpolation methods,bilinear interpolating and Inverse Distance Weighted(IDW)interpolating,are proposed.Four sample areas in China,i.e.,Hanzhong,Chengdu,Linzhi and Shantou,are selected to evaluate the systems bias and precision of WGM2012.Numerical results show the average system bias of WGM2012 BGA in west China is about-100.1 mGal(1 mGal=10^(-5) m/s^(2))and the standard deviation is about 30.7 mGal.Tests in Shantou indicate the system bias in plain areas is about-130.4 mGal and standard deviation is about 6.8 mGal.All these experiments means the accuracy of WGM2012 is limited in high mountain areas of western China,but in plain areas,such as Shantou,WGM2012 BGA map is quite good for most leveling applications after calibrating the system bias.

Status of UnDifferenced and Uncombined GNSS Data Processing Activities in China

With the continued development of multiple Global Navigation Satellite Systems(GNSS)and the emergence of various frequencies,UnDifferenced and UnCombined(UDUC)data processing has become an increasingly attractive option.In this contribution,we provide an overview of the current status of UDUC GNSS data processing activities in China.These activities encompass the formulation of Precise Point Positioning(PPP)models and PPP-Real-Time Kinematic(PPP-RTK)models for processing single-station and multi-station GNSS data,respectively.Regarding single-station data processing,we discuss the advancements in PPP models,particularly the extension from a single system to multiple systems,and from dual frequencies to single and multiple frequencies.Additionally,we introduce the modified PPP model,which accounts for the time variation of receiver code biases,a departure from the conventional PPP model that typically assumes these biases to be time-constant.In the realm of multi-station PPP-RTK data processing,we introduce the ionosphere-weighted PPP-RTK model,which enhances the model strength by considering the spatial correlation of ionospheric delays.We also review the phase-only PPP-RTK model,designed to mitigate the impact of unmodelled code-related errors.Furthermore,we explore GLONASS PPP-RTK,achieved through the application of the integer-estimable model.For large-scale network data processing,we introduce the all-in-view PPP-RTK model,which alleviates the strict common-view requirement at all receivers.Moreover,we present the decentralized PPP-RTK data processing strategy,designed to improve computational efficiency.Overall,this work highlights the various advancements in UDUC GNSS data processing,providing insights into the state-of-the-art techniques employed in China to achieve precise GNSS applications.

Fault Diagnosis and Separation for a Distributed Rotary-laser Scanning System

The wMPS is a laser-based measurement system used for large scale metrology.However,it is susceptible to external factors such as vibrations,which can lead to unreliable measurements.This paper presents a fault diagnosis and separation method which can counter this problem.To begin with,the paper uses simple models to explain the fault diagnosis and separation methods.These methods are then mathematically derived using statistical analysis and the principles of the wMPS.A comprehensive solution for fault diagnosis and separation is proposed,considering the characteristics of the wMPS.The effectiveness of this solution is verified through experimental observations.It can be concluded that this approach can detect and separate false observations,thereby enhancing the reliability of the wMPS.