Large-scale solar sails can provide power to spacecraft for deep space exploration.A new type of telescopic tubular mast(TTM)driven by a bistable carbon fiber-reinforced polymer tube was designed in this study to solv...Large-scale solar sails can provide power to spacecraft for deep space exploration.A new type of telescopic tubular mast(TTM)driven by a bistable carbon fiber-reinforced polymer tube was designed in this study to solve the problem of contact between the sail membrane and the spacecraft under light pressure.Compared with the traditional TTM,it has a small size,light weight,high extension ratio,and simple structure.The anti-blossoming and self-unlocking structure of the proposed TTM was described.We aimed to simplify the TTM with a complex structure into a beam model with equal linear mass density,and the simulation results showed good consistency.The dynamic equation was derived based on the equivalent model,and the effects of different factors on the vibration characteristics of the TTM were analyzed.The performance parameters were optimized based on a multiobjective genetic algorithm,and prototype production and load experiments were conducted.The results show that the advantages of the new TTM can complete the deployment of large-scale solar sails,which is valuable for future deep space exploration.展开更多
Sail is the core part of autonomous sailboat and wing sail is a new type of sail. Wing sail generates not only propulsion but also lateral force and heeling moment. The latter two will affect the navigation status and...Sail is the core part of autonomous sailboat and wing sail is a new type of sail. Wing sail generates not only propulsion but also lateral force and heeling moment. The latter two will affect the navigation status and bring resistance. Double sail can effectively reduce the center of wind pressure and heeling moment. In order to study the effect of distance between two sails, airfoil and attack angle on the total lift coefficient of double sail propulsion system, pressure coefficient distribution and lift coefficient calculation model have been established based on vortex panel method. By using the basic finite solution, the fluid dynamic forces on the two-dimensional sails are computed.The results show that, the distance in the range of 0 to 1 time chord length, when using the same airfoil in the fore and aft sail, the total lift coefficient of the double sail increases with the increase of distance, finally reaches a stable value in the range of one to three times chord length. Lift coefficients of thicker airfoils are more sensitive to the change of distance. The thicker the airfoil, the longer distance is required of the total lift coefficient toward stable.When different airfoils are adopted in fore and aft sail, the total lift coefficient increases with the increase of the thickness of aft sail. The smaller the thickness difference is, the more sensitive to the distance change the lift coefficient is. The thinner the fore sail is, the lower the influence will be on the lift coefficient of aft sail.展开更多
To analyze the influence of the chord length ratio and angle of attack on lift coefficients and explore the interaction mechanism between the two,we established a calculation model of the pressure distribution coeffic...To analyze the influence of the chord length ratio and angle of attack on lift coefficients and explore the interaction mechanism between the two,we established a calculation model of the pressure distribution coefficient on the airfoil surface and lift coefficient of a dual-wing sail on the basis of the vortex panel method.Computational fluid dynamics was used in auxiliary calculation and analysis.Results revealed a reciprocal interference between the front-wing and rear-wing sails.The total lift coefficient of the dual-sail increased with an increase in the front sail chord length.The lift coefficient of the rear sail decreased with an increase in the front sail chord length or angle of attack.The front sail wake affected the pressure distribution on the upper and lower surfaces of the rear sail leading edge.展开更多
Using data from automatic surface weather stations, buoys, lidar and Doppler, the diurnal variation and the three-dimensional structure of the sea breezes near the sailing sites of the Good Luck Beijing- 2006 Qingdao ...Using data from automatic surface weather stations, buoys, lidar and Doppler, the diurnal variation and the three-dimensional structure of the sea breezes near the sailing sites of the Good Luck Beijing- 2006 Qingdao International Regatta from 18 to 31 August 2006 are analyzed. Results show that excluding rainy days and days affected by typhoon, the sea breezes occur nearly every day during this period. When Qingdao is located at the edge of the subtropical high at 500 hPa, the sea breeze is usually stronger, around 3-4 m s^-1. It starts at around 1100 to 1300 LST and lasts about 6 hours. The direction of the sea breeze tends to be southeasterly. When Qingdao is under the control of the subtropical high, the sea breeze is usually weaker, less than 2.5 m s^-1 throughout the day, and begins later, between 1300 and 1500 LST. In this case, the direction of the sea breeze is variable from easterly to southeasterly. Most sea breezes in Qingdao are very shallow, up to 300 meters deep. Strong sea breezes can reach 1.5 km in depth and can push as far as 100 km inland. If the Huanghai sea breeze moves inland and meets the sea breeze of the Jiaozhou Bay in the western part of Qingdao, the sea breeze will strengthen and form three boundaries due to the interaction of the two sea breezes.展开更多
The spinning solar sail of large scale has been well developed in recent years. Such a solar sail can be considered as a rigid-flexible multibody system mainly composed of a spinning central rigid hub, a number of fle...The spinning solar sail of large scale has been well developed in recent years. Such a solar sail can be considered as a rigid-flexible multibody system mainly composed of a spinning central rigid hub, a number of flexible thin tethers, sail membranes, and tip masses. A simplified interplanetary kite-craft accelerated by radiation of the Sun (IKAROS) model is established in this study by using the absolute-coordinate-based (ACB) method that combines the natural coordinate formulation (NCF) describing the central rigid hub and the absolute nodal coordinate formulation (ANCF) describing flexible parts. The initial configuration of the system in the second-stage deployment is determined through both dynamic and static analyses. The huge set of stiff equations of system dynamics is solved by using the generalized-alpha method, and thus the deployment dynamics of the system can be well understood.展开更多
The fuel consumption associated with some interplanetary transfer trajectories using chemical propulsion is not affordable. A solar sail is a method of propulsion that does not consume fuel. Transfer time is one of th...The fuel consumption associated with some interplanetary transfer trajectories using chemical propulsion is not affordable. A solar sail is a method of propulsion that does not consume fuel. Transfer time is one of the most pressing problems of solar sail transfer trajectory design. This paper investigates the time-optimal interplanetary transfer trajectories to a circular orbit of given inclination and radius. The optimal control law is derived from the principle of maximization. An indirect method is used to solve the optimal control problem by selecting values for the initial adjoint vari- ables, which are normalized within a unit sphere. The conditions for the existence of the time-optimal transfer are dependent on the lightness number of the sail and the inclination and radius of the target orbit. A numerical method is used to obtain the boundary values for the time-optimal transfer trajectories. For the cases where no time-optimal transfer trajectories exist, first-order necessary conditions of the optimal control are proposed to obtain feasible solutions. The results show that the transfer time decreases as the minimum distance from the Sun decreases during the transfer duration. For a solar sail with a small lightness number, the transfer time may be evaluated analytically for a three-phase transfer trajectory. The analytical results are compared with previous results and the associated numerical results. The transfer time of the numerical result here is smaller than the transfer time from previous results and is larger than the analytical result.展开更多
The advantage of solar sails in deep space exploration is that no fuel consumption is required. The heliocentric distance is one factor influencing the solar radiation pressure force exerted on solar sails. In additio...The advantage of solar sails in deep space exploration is that no fuel consumption is required. The heliocentric distance is one factor influencing the solar radiation pressure force exerted on solar sails. In addition, the solar radiation pressure force is also related to the solar sail orientation with respect to the sunlight direction. For an ideal flat solar sail, the cone angle between the sail normal and the sunlight direction determines the magnitude and direction of solar radiation pressure force. In general, the cone angle can change from 0° to 90°. However, in practical applications, a large cone angle may reduce the efficiency of solar radiation pressure force and there is a strict requirement on the attitude control. Usually, the cone angle range is restricted less more than an acute angle (for example, not more than 40°) in engineering practice. In this paper, the time-optimal transfer trajectory is designed over a restricted range of the cone angle, and an indirect method is used to solve the two point boundary value problem associated to the optimal control problem. Relevant numerical examples are provided to compare with the case of an unrestricted case, and the effects of different maximum restricted cone angles are discussed. The results indicate that (1) for the condition of a restricted cone-angle range the transfer time is longer than that for the unrestricted case and (2) the optimal transfer time increases as the maximum restricted cone angle decreases.展开更多
基金Supported by National Key R&D Program of China (Grant No.2018YFB1304600)National Natural Science Foundation of China (Grant No.51905527)+1 种基金CAS Interdisciplinary Innovation Team of China (Grant No.JCTD-2018-11)State Key Laboratory of Robotics Foundation of China (Grant No.Y91Z0303)。
文摘Large-scale solar sails can provide power to spacecraft for deep space exploration.A new type of telescopic tubular mast(TTM)driven by a bistable carbon fiber-reinforced polymer tube was designed in this study to solve the problem of contact between the sail membrane and the spacecraft under light pressure.Compared with the traditional TTM,it has a small size,light weight,high extension ratio,and simple structure.The anti-blossoming and self-unlocking structure of the proposed TTM was described.We aimed to simplify the TTM with a complex structure into a beam model with equal linear mass density,and the simulation results showed good consistency.The dynamic equation was derived based on the equivalent model,and the effects of different factors on the vibration characteristics of the TTM were analyzed.The performance parameters were optimized based on a multiobjective genetic algorithm,and prototype production and load experiments were conducted.The results show that the advantages of the new TTM can complete the deployment of large-scale solar sails,which is valuable for future deep space exploration.
基金financially supported by the JIANG Xinsong Innovation Fund(Grant No.Y8F7010701)
文摘Sail is the core part of autonomous sailboat and wing sail is a new type of sail. Wing sail generates not only propulsion but also lateral force and heeling moment. The latter two will affect the navigation status and bring resistance. Double sail can effectively reduce the center of wind pressure and heeling moment. In order to study the effect of distance between two sails, airfoil and attack angle on the total lift coefficient of double sail propulsion system, pressure coefficient distribution and lift coefficient calculation model have been established based on vortex panel method. By using the basic finite solution, the fluid dynamic forces on the two-dimensional sails are computed.The results show that, the distance in the range of 0 to 1 time chord length, when using the same airfoil in the fore and aft sail, the total lift coefficient of the double sail increases with the increase of distance, finally reaches a stable value in the range of one to three times chord length. Lift coefficients of thicker airfoils are more sensitive to the change of distance. The thicker the airfoil, the longer distance is required of the total lift coefficient toward stable.When different airfoils are adopted in fore and aft sail, the total lift coefficient increases with the increase of the thickness of aft sail. The smaller the thickness difference is, the more sensitive to the distance change the lift coefficient is. The thinner the fore sail is, the lower the influence will be on the lift coefficient of aft sail.
基金the Foundation of State Key Laboratory of Robotics(No.2020-Z14)the Jiang Xin-song Innovation Foundation(No.Y8F7010701)+1 种基金the National Natural Science Foundation of China(No.41906173)the China Postdoctoral Science Foundation(No.2019M662874)。
文摘To analyze the influence of the chord length ratio and angle of attack on lift coefficients and explore the interaction mechanism between the two,we established a calculation model of the pressure distribution coefficient on the airfoil surface and lift coefficient of a dual-wing sail on the basis of the vortex panel method.Computational fluid dynamics was used in auxiliary calculation and analysis.Results revealed a reciprocal interference between the front-wing and rear-wing sails.The total lift coefficient of the dual-sail increased with an increase in the front sail chord length.The lift coefficient of the rear sail decreased with an increase in the front sail chord length or angle of attack.The front sail wake affected the pressure distribution on the upper and lower surfaces of the rear sail leading edge.
基金supported by National Natural Science Foun-dation of China Grant (Grant No. 40705017)the Chinese Academy of Sciences Grant (Grant No. 2004-2-7)the Natural Science Foundation of Shandong Province Grant(Grant No. Q2007E03)
文摘Using data from automatic surface weather stations, buoys, lidar and Doppler, the diurnal variation and the three-dimensional structure of the sea breezes near the sailing sites of the Good Luck Beijing- 2006 Qingdao International Regatta from 18 to 31 August 2006 are analyzed. Results show that excluding rainy days and days affected by typhoon, the sea breezes occur nearly every day during this period. When Qingdao is located at the edge of the subtropical high at 500 hPa, the sea breeze is usually stronger, around 3-4 m s^-1. It starts at around 1100 to 1300 LST and lasts about 6 hours. The direction of the sea breeze tends to be southeasterly. When Qingdao is under the control of the subtropical high, the sea breeze is usually weaker, less than 2.5 m s^-1 throughout the day, and begins later, between 1300 and 1500 LST. In this case, the direction of the sea breeze is variable from easterly to southeasterly. Most sea breezes in Qingdao are very shallow, up to 300 meters deep. Strong sea breezes can reach 1.5 km in depth and can push as far as 100 km inland. If the Huanghai sea breeze moves inland and meets the sea breeze of the Jiaozhou Bay in the western part of Qingdao, the sea breeze will strengthen and form three boundaries due to the interaction of the two sea breezes.
基金supported by the National Natural Science Foundation of China (11221202 and 51075032)Excellent Young Scholar Research Fund from Beijing Institute of Technology
文摘The spinning solar sail of large scale has been well developed in recent years. Such a solar sail can be considered as a rigid-flexible multibody system mainly composed of a spinning central rigid hub, a number of flexible thin tethers, sail membranes, and tip masses. A simplified interplanetary kite-craft accelerated by radiation of the Sun (IKAROS) model is established in this study by using the absolute-coordinate-based (ACB) method that combines the natural coordinate formulation (NCF) describing the central rigid hub and the absolute nodal coordinate formulation (ANCF) describing flexible parts. The initial configuration of the system in the second-stage deployment is determined through both dynamic and static analyses. The huge set of stiff equations of system dynamics is solved by using the generalized-alpha method, and thus the deployment dynamics of the system can be well understood.
基金Supported by the National Natural Science Foundation of China(Grant Nos. 10902056 and 10832004)
文摘The fuel consumption associated with some interplanetary transfer trajectories using chemical propulsion is not affordable. A solar sail is a method of propulsion that does not consume fuel. Transfer time is one of the most pressing problems of solar sail transfer trajectory design. This paper investigates the time-optimal interplanetary transfer trajectories to a circular orbit of given inclination and radius. The optimal control law is derived from the principle of maximization. An indirect method is used to solve the optimal control problem by selecting values for the initial adjoint vari- ables, which are normalized within a unit sphere. The conditions for the existence of the time-optimal transfer are dependent on the lightness number of the sail and the inclination and radius of the target orbit. A numerical method is used to obtain the boundary values for the time-optimal transfer trajectories. For the cases where no time-optimal transfer trajectories exist, first-order necessary conditions of the optimal control are proposed to obtain feasible solutions. The results show that the transfer time decreases as the minimum distance from the Sun decreases during the transfer duration. For a solar sail with a small lightness number, the transfer time may be evaluated analytically for a three-phase transfer trajectory. The analytical results are compared with previous results and the associated numerical results. The transfer time of the numerical result here is smaller than the transfer time from previous results and is larger than the analytical result.
基金supported by the National Natural Science Foundation of China(11272004 and 11302112)China’s Civil Space Funding
文摘The advantage of solar sails in deep space exploration is that no fuel consumption is required. The heliocentric distance is one factor influencing the solar radiation pressure force exerted on solar sails. In addition, the solar radiation pressure force is also related to the solar sail orientation with respect to the sunlight direction. For an ideal flat solar sail, the cone angle between the sail normal and the sunlight direction determines the magnitude and direction of solar radiation pressure force. In general, the cone angle can change from 0° to 90°. However, in practical applications, a large cone angle may reduce the efficiency of solar radiation pressure force and there is a strict requirement on the attitude control. Usually, the cone angle range is restricted less more than an acute angle (for example, not more than 40°) in engineering practice. In this paper, the time-optimal transfer trajectory is designed over a restricted range of the cone angle, and an indirect method is used to solve the two point boundary value problem associated to the optimal control problem. Relevant numerical examples are provided to compare with the case of an unrestricted case, and the effects of different maximum restricted cone angles are discussed. The results indicate that (1) for the condition of a restricted cone-angle range the transfer time is longer than that for the unrestricted case and (2) the optimal transfer time increases as the maximum restricted cone angle decreases.