Mechanical responses of anchoring structure under triaxial cyclic loading

Dynamic load on anchoring structures(AS)within deep roadways can result in cumulative damage and failure.This study develops an experimental device designed to test AS under triaxial loads.The device enables the investigation of the mechanical response,failure mode,instability assessment criteria,and anchorage effect of AS subjected to combined cyclic dynamic-static triaxial stress paths.The results show that the peak bearing strength is positively correlated with the anchoring matrix strength,anchorage length,and edgewise compressive strength.The bearing capacity decreases significantly when the anchorage direction is severely inclined.The free face failure modes are typically transverse cracking,concave fracturing,V-shaped slipping and detachment,and spallation detachment.Besides,when the anchoring matrix strength and the anchorage length decrease while the edgewise compressive strength,loading rate,and anchorage inclination angle increase,the failure intensity rises.Instability is determined by a negative tangent modulus of the displacement-strength curve or the continued deformation increase against the general downward trend.Under cyclic loads,the driving force that breaks the rock mass along the normal vector and the rigidity of the AS are the two factors that determine roadway stability.Finally,a control measure for surrounding rock stability is proposed to reduce the internal driving force via a pressure relief method and improve the rigidity of the AS by full-length anchorage and grouting modification.

Anchoring mechanical characteristics of Ductile-Expansion bolt

The application of ductile rock bolts has been a crucial method for solving the problems of large deformations,energy absorption and stability control issues in deep rock masses.To study the anchoring mechanism of the key expansive structure,this paper proposes a novel type of bolt—the Ductile-Expansion bolt,and conducts research on anchoring mechanics,energy absorption characteristics,and failure modes of the bolt.In addition,this paper defines the concept of load-volume ratio of metal rock bolts and proves the Ductile-Expansion bolt is capable of better improving the unit volume bearing capacity of the bolt material.Furthermore,laboratory and field tests verify the Ductile-Expansion bolt had better anchoring effect than the traditional rebar bolt,with the expansion structure favorably enhancing the ductility and energy absorption performance of the bolt.Finally,this paper microscopically analyzes the crack propagation and distribution morphology of the bolts by establishing a 3D coupled numerical model based on FDM-DEM.Numerical results illustrate the interface at the variable diameter of the Ductile-Expansion bolt serves as the transition zone between high and low stress levels.The expansion structure can impose radial compression on the medium around the bolt,which can improve the bolt anchorage performance.

Unfolding the structure-property relationships of Li_(2)S anchoring on two-dimensional materials with high-throughput calculations and machine learning

Lithium-sulfur(Li-S)batteries are notable for their high theoretical energy density,but the‘shuttle effect’and the limited conversion kinetics of Li-S species can downgrade their actual performance.An essential strategy is to design anchoring materials(AMs)to appropriately adsorb Li-S species.Herein,we propose a new three-procedure protocol,named InfoAd(Informative Adsorption)to evaluate the anchoring of Li_(2)S on two-dimensional(2D)materials and disclose the underlying importance of material features by combining high-throughput calculation workflow and machine learning(ML).In this paradigm,we calculate the anchoring of Li_(2)S on 12552D A_(x)B_(y)(B in the VIA/VIIA group)materials and pick out 44(un)reported nontoxic 2D binary A_(x)B_(y)AMs,in which the importance of the geometric features on the anchoring effect is revealed by ML for the first time.We develop a new Infograph model for crystals to accurately predict whether a material has a moderate binding with Li_(2)S and extend it to all 2D materials.Our InfoAd protocol elucidates the underlying structure-property relationship of Li_(2)S adsorption on 2D materials and provides a general research framework of adsorption-related materials for catalysis and energy/substance storage.

Study on the Influence of Radial Pressurization on Anchoring Performance of Bolts

Supporting soft rock roadways in coal mines has long posed a formidable challenge. Addressing issues such as the formation of soft rock strata, poor fracture development, limited tolerance, and the frequent and severe damage sustained by conventional bolts due to their low elongation and bearing capacity, this study employs bottom expansion and filling technology. It combines theoretical analysis with booster bolt pull-out tests to scrutinize the radial stress distribution of bolts under extrusion forces. Moreover, it conducts a comparative analysis of bolt bearing characteristics under varying radial pressurization conditions, delving into the impact of radial directional increases in compressive stress on bolt anchoring performance.

Anchoring properties of substrate with a grating surface

The anchoring properties of substrate with a grating surface are investigated analytically. The alignment of nematic liquid crystal （NLC） in a grating surface originates from two mechanisms, thus the anchoring energy consists of two parts. One originates from the interaction potential between NLC molecules and the molecules on the substrate surface, and the other stems from the increased elastic strain energy. Based on the two mechanisms, the expression of anchoring energy per unit area of a projected plane of this grating surface is deduced and called the equivalent anchoring energy formula. Both the strength and the easy direction of equivalent anchoring energy are a function of the geometrical parameters （amplitude and pitch） of a grating surface. By using this formula, the grating surface can be replaced by its projected plane and its anchoring properties can be described by the equivalent anchoring energy formula.

Azimuthal anchoring of a nematic liquid crystal on a grooved interface with anisotropic polar anchoring

Zhang Y J et al.[Zhang Y J,Zhang Z D,Zhu L Z and Xuan L 2011 Liquid Cryst.38 355] investigated the effects of finite polar anchoring on the azimuthal anchoring energy at a grooved interface,in which polar anchoring was isotropic in the local tangent plane of the surface.In this paper,we investigate the effects of both isotropic and anisotropic polar anchoring on the surface anchoring energy in the frame of Fukuda et al.’s theory.The results show that anisotropic polar anchoring strengthens the azimuthal anchoring of grooved surfaces.In the one-elastic-constant approximation（K11 = K22 = K33 = K）,the surface-groove-induced azimuthal anchoring energy is entirely consistent with the result of Faetti,and it reduces to the original result of Berreman with an increase in polar anchoring.Moreover,the contribution of the surface-like elastic term to the Rapini-Papoular anchoring energy is zero.

Anchoring eccentricity features and rectifying devices for resin grouted bolt/cable bolt

The anchoring eccentricity of the bolt and cable bolt is a common problem in geotechnical support engineering and affects the ability of the bolt and cable bolt to control the rock mass to a certain extent.This paper reports on numerical simulation and laboratory experiments conducted to clarify the effect of eccentricity on the anchoring quality of the bolt and cable bolt,and to establish an effective solution strategy.The results reveal that the anchoring eccentricity causes unbalanced stress distribution and the uncoordinated deformation of the resin layer,which results in higher stress and greater deformation of the resin layer at the near side of the rod body.Additionally,as the degree of anchoring eccentricity increases,the effect becomes more significant,and the resin layer of the anchoring system becomes more likely to undergo preferential failure locally,which weakens the load-bearing performance of the anchoring system.This paper develops an innovative bolt anchoring rectifying device(B-ARD)and cable bolt anchoring rectifying device(C-ARD)on the basis of the structural characteristics of the bolt and cable bolt to better ensure the anchoring effect of them.The working effects of these two devices were verified in detailed experiments and analysis.The experimental results show that the anchoring rectifying devices(ARD)improve and ensure the anchoring concentricity of the bolt and cable bolt,which will help improve the supporting performance of them.The paper provides a convenient and effective method for improving the anchoring concentricity of the bolt and cable bolt,and provides a concept and reference for technical research on improving the effect of roof bolting.

Anchoring effect and energy-absorbing support mechanism of large deformation bolt

To research the anchoring effect of large deformation bolt,tensile and drawing models are established.Then,the evolution laws of drawing force,bolt axial force and interfacial shear stress are analyzed.Additionally,the influence of structure element position on the anchoring effect of large deformation bolt is discussed.At last,the energy-absorbing support mechanism is discussed.Results show that during the drawing process of normal bolt,drawing force,bolt axial force and interfacial shear stress all gradually increase as increasing the drawing displacement,but when the large deformation bolt enters the structural deformation stage,these three values will keep stable;when the structure element of large deformation bolt approaches the drawing end,the fluctuation range of drawing force decreases,the distributions of bolt axial force and interfacial shear stress of anchorage section are steady and the increasing rate of interfacial shear stress decreases,which are advantageous for keeping the stress stability of the anchorage body.During the working process of large deformation bolt,the strain of bolt body is small,the working resistance is stable and the distributions of bolt axial force and interfacial shear stress are steady.When a rock burst event occurs,the bolt and bonding interface cannot easily break,which weakens the dynamic disaster degree.

Anchoring Depth Research of Anti-Slide Piles of Anchor Bar in Soil

The model test result of earth force in the side of anti-slide pile of anchor bars was introduced.There are three groups of the tests.The loads were on the back side of the slope in two groups.The other one was loaded just behind the pile by the jack.In order to get the force of the soil,some earth-pressure boxes were used to get the earth pressure on the side of the piles.The part of the max pressure and the earth pressure was mainly focused under the slip line

A study of anchoring geographic coordinates and calculating zenith and azimuth of sun and scanner for oceanic satellite data

ＡｓｔｕｄｙｏｆａｎｃｈｏｒｉｎｇｇｅｏｇｒａｐｈｉｃｃｏｏｒｄｉｎａｔｅｓａｎｄｃａｌｃｕｌａｔｉｎｇｚｅｎｉｔｈａｎｄａｚｉｍｕｔｈｏｆｓｕｎａｎｄｓｃａｎｎｅｒｆｏｒｏｃｅａｎｉｃｓａｔｅｌｌｉｔｅｄａｔａＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｓｃａｎ...

Modified laparoscopic Sugarbaker repair of parastomal hernia with a three-point anchoring technique

AIMTo retrospectively evaluate the safety and feasibility of a new modified laparoscopic Sugarbaker repair in patients with parastomal hernias.METHODSA retrospective study was performed to analyze eight patients who underwent parastomal hernia repair between June 2016 and January 2018. All of these patients received modified laparoscopic Sugarbakerhernia repair treatment. This modifed technique included an innovative three-point anchoring and complete su-turing technique to fix the mesh. All procedures were performed by a skilled hernia surgeon. Demographic data and perioperative outcomes were collected to eva-luate the safety and effcacy of this modifed technique.RESULTSOf these eight patients, two had concomitant incisional hernias. All the hernias were repaired by the modifed laparoscopic Sugarbaker technique with no conversion to laparotomy. Three patients had in-situ reconstruc-tion of intestinal stoma. The median mesh size was 300 cm2, and the mean operative time was 205.6 min. The mean postoperative hospitalization time was 10.4 d, with a median pain score of 1 （visual analog scale method） at postoperative day 1. Two patientsdeveloped postoperative complications. One patient had a pocket of effusion surrounding the biologic mesh, and one patient experienced an infection around the reconstructed stoma. Both patients recovered after conservative management. There was no recurrence during the follow-up period （6-22 mo, average 13 mo）.CONCLUSIONThe modifed laparoscopic Sugarbaker repair could fx the mesh reliably with mild postoperative pain and a low recurrence rate. The technique is safe and feasible for parastomal hernias.

Anchoring mechanism and application of hydraulic expansion bolts used in soft rock roadway floor heave control

Comparing with the resin bolt, the hydraulic expansion bolt has different anchoring mechanism and application advantage. According to the working mechanism of the hydraulic expansion bolt, its anchoring force is expressed in four forms including support anchoring force, tension anchoring force, expansion anchoring force and tangent anchoring force, and their values can be obtained on the basis of each calculation formula. Among them, the expansion anchoring force, which is the unique anchoring force of the hydraulic expansion bolt, can provide confining pressure to increase the strength of rock. Aiming at solving the problem of stability control in the soft rock roadway in Jinbaotun Coal Mine which has a double layer of 40 U-type sheds and cannot provide enough resistance support to control floor heave, the study reveals the mechanism of floor heave in the soft rock roadway, and designs the reasonable support parameters of the hydraulic expansion bolts. The observed results of floor convergence indicate that the hydraulic expansion bolts can prevent the development and flow of the plastic zone in the floor rock to control floor heave. Research results enrich the control technology in the soft rock roadway.

Diagnostic and therapeutic direct peroral cholangioscopy using an intraductal anchoring balloon

AIM:To report our experience using a recently introduced anchoring balloon for diagnostic and therapeutic direct peroral cholangioscopy(DPOC).METHODS:Consecutive patients referred for diagnostic or therapeutic peroral cholangioscopy were evaluated in a prospective cohort study.The patients underwent DPOC using an intraductal anchoring balloon,which was recently introduced to allow consistent access to the biliary tree with an ultraslim upper endoscope.The device was later voluntarily withdrawn from the market by the manufacturer.RESULTS:Fourteen patients underwent DPOC using the anchoring balloon.Biliary access with an ultraslim upper endoscope was accomplished in all 14 patients.In 12(86%) patients,ductal access required sphincteroplasty with a 10-mm dilating balloon.Intraductal placement of the ultraslim upper endoscope allowed satisfactory visualization of the biliary mucosa to the level of the confluence of the right and left hepatic ducts in 13 of 14 patients(93%).Therapeutic interventions by DPOC were successfully completed in all five attempted cases(intraductal biopsy in one and DPOC guided laser lithotripsy in four).Adverse events occurred in a patient on immunosuppressive therapy who developed an intrahepatic biloma at the site of the anchoring balloon.This required hospitalization and antibiotics.Repeat endoscopic retrograde cholangiopancreatography 8 wk after the index procedure showed resolution of the biloma.CONCLUSION:Use of this anchoring balloon allowed consistent access to the biliary tree for performance of diagnostic and therapeutic DPOC distal to the biliary bifurcation.

Self-assembled donor-acceptor hole contacts for inverted perovskite solar cells with an efficiency approaching 22%: The impact of anchoring groups

Self-assembled molecules(SAMs) have shown great potential in replacing bulk charge selective contact layers in high-performance perovskite solar cells(PSCs) due to their low material consumption and simple processing. Herein, we design and synthesize a series of donor-acceptor(D-A) type SAMs(MPA-BTCA, MPA-BT-BA, and MPA-BT-RA, where MPA is 4-methoxy-N-(4-methoxyphenyl)-N-phenylaniline;BT is benzo[c][1,2,5]-thiadiazole;CA is 2-cyanoacrylic acid, BA is benzoic acid, RA is rhodanine-3-propionic acid) with distinct anchoring groups, which show dramatically different properties. MPA-BTCA with CA anchoring groups exhibited stronger dipole moments and formed a homogeneous monolayer on the indium tin oxide(ITO) surface by adopting an upstanding self-assembling mode. However, the MPA-BT-RA molecules tend to aggregate severely in solid state due to the sp~3 hybridization of the carbon atom on the RA group, which is not favorable for achieving a long-range ordered self-assembled layer.Consequently, benefiting from high dipole moment, as well as dense and uniform self-assembled film,the device based on MPA-BT-CA yielded a remarkable power conversion efficiency(PCE) of 21.81%.Encouragingly, an impressive PCE approaching 20% can still be obtained for the MPA-BT-CA-based PSCs as the device area is increased to 0.80 cm^(2). Our work sheds light on the design principles for developing hole selecting SAMs, which will pave a way for realizing highly efficient, flexible, and large-area PSCs.

Epigenetic interventions for brain rejuvenation：anchoring age-related transposons

Highlights：1.Iron and homocysteine accumulation in aging neurons alter genomic methylation.2.The altered methylome reactivates neuronal cell cycle,enabling transposable element mobilization.3.mi R29/p53 axis restores age-related methylation shifts,reactivating neuronal plasticity.4.Augmentation of mi R-29/p53 axis may preempt neurodegenerative disorders.

Rational design of porous carbon allotropes as anchoring materials for lithium sulfur batteries

The shuttle effect seriously impedes the development and practical application of lithium sulfur(Li-S)batteries.It is still a long-term challenge to find effective anchoring materials to hinder the shuttle effect of Li-S batteries.Using carbon allotrope as anchoring materials is an effective strategy to alleviate the shuttling effect.However,the influence factors of carbon allotrope on the adsorption performance of LIPSS at the atomic level are not clear,which limits the application of carbon allotrope in Li-S batteries.Herein,using first-principles simulations,a systematical calculation of carbon allotropes with various ring size(6 ≤S≤16) and shape is conducted to understand the adsorption mechanism.The results show that the T-G monolayers with suitable ring structure and high charge transfer can significantly enhance the interaction between the monolayer and LiPSs,allowing them to have high capacity and high coulombic efficiency.Further diffusion studies show that LiPSs on the T-G monolayer have the low diffusion barriers,which ensures the charging and discharging rate of batteries.Our studies could provide material design principles of carbon allotrope monolayers used as anchoring materials of the high performance Li-S batteries.

Experimental design to measure the anchoring energy on substrate surface by using the alternating-current bridge

The anchoring property of the substrate surface of liquid crystal cells plays an important role in display and nondisplay fields. This property directly affects the deformation of liquid crystal molecules to change the phase difference through liquid crystal cells. In this paper, a test method based on the alternating-current bridge is proposed to determine the capacitance of liquid crystal cells and thus measure the anchoring energy of the substrate surface. The anchoring energy can be obtained by comparing the capacitance-voltage curves of twisted nematic liquid crystal cells with different anchoring properties in experimental and theoretical results simulated on the basis of Frank elastic theory. Compared with the other methods to determine the anchoring energy, our proposed method requires a simple treatment of liquid crystal cells and allows easy and high-accuracy measurements, thereby expanding the test ideas on the performance parameters of liquid crystal devices.

TiS_(2)-graphene heterostructures enabling polysulfide anchoring and fast electrocatalyst for lithium-sulfur batteries:A first-principles calculation

Lithium-sulfur batteries have attracted attention because of their high energy density.However,the "shuttle effect" caused by the dissolving of polysulfide in the electrolyte has greatly hindered the widespread commercial use of lithiumsulfur batteries.In this paper,a novel two-dimensional TiS2/graphene heterostructure is theoretically designed as the anchoring material for lithium-sulfur batteries to suppress the shuttle effect.This heterostructure formed by the stacking of graphene and TiS2 monolayer is the van der Waals type,which retains the intrinsic metallic electronic structure of graphene and TiS2 monolayer.Graphene improves the electronic conductivity of the sulfur cathode,and the transferred electrons from graphene enhance the polarity of the TiS2 monolayer.Simulations of the polysulfide adsorption show that the TiS2/graphene hetero structure can maintain good metallic properties and the appropriate adsorption energies of 0.98-3.72 eV,which can effectively anchor polysulfides.Charge transfer analysis suggests that further enhancement of polarity is beneficial to reduce the high proportion of van der Waals(vdW) force in the adsorption energy,thereby further enhancing the anchoring ability.Low Li2 S decomposition barrier and Li-ion migration barrier imply that the heterostructure has the ability to catalyze fast electrochemical kinetic processes.Therefore,TiS2/graphene heterostructure could be an important candidate for ideal anchoring materials of lithium-sulfur batteries.

The Effect of Verbal Anchoring on the Processing of Advertising Pictorial Metaphors

Although investigating metaphors in advertising is gaining in popularity, there are still certain unresolved arguments, such as the interaction between elements of different modalities. This study,composed of three behavioral experiments, aims to identify how verbal anchoring(literal anchoring, metaphor anchoring and unrelated anchoring) influences the processing of pictorial metaphors in advertising, by observing the cognitive and affective indicators, advertising comprehension and advertising likeability. The results showed 1) that metaphors in pictorial modality were recognized more quickly than those in verbal modality, 2) that verbal anchoring facilitated participants ’ comprehending and appreciating of pictorial metaphors and 3) that literally-anchored metaphors with a moderate level of novelty yielded the most favorable cognitive responses. The study not only enriches the existing theoretical framework of multimodal metaphors in advertising, but also proposes an optimal match between pictorial metaphors and verbal elements, for advertisers and manufacturers to design effective multimodal advertisements.

Effects of anchoring groups on perylenemonoimide-based sensitizers for p-type dye-sensitized solar cells and photoelectrochemical cells

In this work, two new dyes YK-1 and YK-2 with carboxylic acid and hydroxamic acid as anchoring groups,respectively, in combination with diphenylamine as donor and perylenemonoimide as acceptor were synthesized and applied in p-type dye-sensitized solar cells（p-DSCs） and dye-sensitized photoelectrochemical cells（PEC）. The results showed that the sensitizer（YK-1） based on carboxylic acid displayed a higher conversion efficiency of 0.064% under AM 1.5 solar conditions in p-DSCs. However, it was interesting that the hydroxamic acid based sensitizer（YK-2） on Ni O photocathode displayed better performance in a hydrophilic environment over a broad p H range under visible-light irradiation because of a versatile covalent attachment to Ni O surfaces. This may be ascribed to hydroxamic acid anchors, which have more sites interacting with the surface of Ni O in aqueous solution. This study demonstrates that YK-2 containing hydroxamic acid anchoring group is a promising candidate to achieve highly efficient and stable activity for dye-sensitized PEC system.