The reduction smelting process for cobalt recovery from converter slag of the Chambishi Copper Smelter in Zambia was studied. The effects of reducing agent dosage, smelting temperature and time and the addition of sla...The reduction smelting process for cobalt recovery from converter slag of the Chambishi Copper Smelter in Zambia was studied. The effects of reducing agent dosage, smelting temperature and time and the addition of slag modifiers （CaO and TiO2） were investigated. In addition, the depleted slag and cobalt-bearing alloy were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. Under the determined conditions, 94.02% Co, 95.76% Cu and less than 18% Fe in the converter slag were recovered. It was found that the main phases of depleted slag were fayalite and hercynite; and the cobalt-bearing alloy mainly contained metallic copper, Fe-Co-Cu alloys and a small amount of sulfide.展开更多
The behavior of resistive short defects in FPGA interconnects is investigated through simulation and theoretical analysis.The results show that these defects result in timing failures and even Boolean faults for small...The behavior of resistive short defects in FPGA interconnects is investigated through simulation and theoretical analysis.The results show that these defects result in timing failures and even Boolean faults for small defect resistance values.The best detection situations for large resistance defect happen when the path under test makes a v-to-v′ transition and another path causing short faults remains at value v.Small defects can be detected easily through static analysis.Under the best test situations,the effects of supply voltage and temperature on test results are evaluated.The results verify that lower voltage helps to improve detectability.If short material has positive temperature coefficient,low temperature is better;otherwise,high temperature is better.展开更多
基金Project(2008BAB34B01-1)supported by the National Key Technology R&D Program of China
文摘The reduction smelting process for cobalt recovery from converter slag of the Chambishi Copper Smelter in Zambia was studied. The effects of reducing agent dosage, smelting temperature and time and the addition of slag modifiers （CaO and TiO2） were investigated. In addition, the depleted slag and cobalt-bearing alloy were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. Under the determined conditions, 94.02% Co, 95.76% Cu and less than 18% Fe in the converter slag were recovered. It was found that the main phases of depleted slag were fayalite and hercynite; and the cobalt-bearing alloy mainly contained metallic copper, Fe-Co-Cu alloys and a small amount of sulfide.
文摘The behavior of resistive short defects in FPGA interconnects is investigated through simulation and theoretical analysis.The results show that these defects result in timing failures and even Boolean faults for small defect resistance values.The best detection situations for large resistance defect happen when the path under test makes a v-to-v′ transition and another path causing short faults remains at value v.Small defects can be detected easily through static analysis.Under the best test situations,the effects of supply voltage and temperature on test results are evaluated.The results verify that lower voltage helps to improve detectability.If short material has positive temperature coefficient,low temperature is better;otherwise,high temperature is better.
