The Construction and Analysis of Linear Ring Spaces

This paper proposes the novel algebraic structure of a linear ring space. A linear ring space is an order triad consisting of two rings, and a linear map between the two rings. The definition of quasi-linearity is discussed, in addition to the examination of properties and classifications of linear ring spaces. Particularly, the ring of holomorphic functions on a region of the complex plane is examined, and the manner in which it generates an iterated linear ring space under the complex derivative operator. This notion is then generalized to all rings with nth order linear and surjective operators. Basic operator theory regarding the classifications of linear ring maps is also covered.

Algorithm for Visualization of Zero Divisor Graphs of the Ring ℤn Using MAPLE Coding

This research investigates the comparative efficacy of generating zero divisor graphs (ZDGs) of the ring of integers ℤn modulo n using MAPLE algorithm. Zero divisor graphs, pivotal in the study of ring theory, depict relationships between elements of a ring that multiply to zero. The paper explores the development and implementation of algorithms in MAPLE for constructing these ZDGs. The comparative study aims to discern the strengths, limitations, and computational efficiency of different MAPLE algorithms for creating zero divisor graphs offering insights for mathematicians, researchers, and computational enthusiasts involved in ring theory and mathematical computations.

Experimental,Numerical,and Analytical Studies on the Bending of Mechanically Lined Pipe

Mechanically lined pipe(MLP)is often used for offshore oil and gas transport because of its low cost and corrosion resistance.During installation and operation,the pipe may undergo severe bending deformation,which causes the liner to separate from the outer pipe and buckles,affecting the stability of the whole line.In this paper,the buckling response of MLP subjected to bending is investigated to clarify its bending characteristics by employing both experiments,numerical simulation,as theoretical methods.Two types of MLPs were manufactured with GB 45 carbon steel(SLP)and Al 6061(ALP)used as the outer pipe material,respectively.The hydraulic expansion and bending experiments of small-scale MLPs are conducted.In addition to the ovalized shape of the cross-section for the SLP specimens,the copper liner was found to wrinkle on the compressive side.In contrast,the liner of ALP remains intact without developing any wrinkling and collapse mode.In addition,a dedicated numerical framework and theoretical models were also established.It was found both the manufacturing and bending responses of the MLP can be well reproduced,and the predicted maximum moment and critical curvatures are in good agreement with the experimental results.

浅谈环张力对C=C及C=O双键红外吸收频率的影响

红外光谱是大学波谱分析课程教学的重要内容之一,而环张力对红外吸收频率的影响则是其中的难点。现有的教材没有对此进行严谨和详尽的解释,使得学生在接受环张力对基团红外振动频率影响的结论时仍然会感到困惑。本文运用密度泛函理论(DFT),在全优化分子结构的基础上,计算出相关化合物的张力能、化学键的键长、键角、振动频率以及轨道成分。基于DFT计算结果,详尽合理地解释了环张力是如何影响C=C及C=O双键的振动频率。

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Pipes inevitably encounter high ambient pressure and bending moment during the deepwater pipe-laying process,which can lead to elliptical buckling and even deterioration failure.For the safety of pipe-laying operation,available formulas for the pipe stability are established on the basis of the assumption of uniform deformation along the tube length and symmetrical buckling.This method can predict the nonlinear response of elliptical collapse of steel circular tubes for different ratios of diameter to thickness（D/t）under pure bending or combined bending and external pressure.In these formulas,the strain-displacement relationship is deduced from the nonlinear ring theory,and the Ramberg-Osgood constitutive model is applied to simulate the inelastic material behavior.Meanwhile,the principle of virtual work is adopted to derive the equilibrium equations.A set of equations is solved by the Newton-Raphson method,and the iterative scheme contains nested iteration for the constitutive relation.In order to check the effectiveness of this theoretical method,illustrative examples are presented in this paper.Besides,the numerical simulation is carried out by use of ANSYS.A comparison of the results shows that the theoretical method can provide reasonable prediction for engineering practice.

A unified analysis of a micro-beam,droplet and CNT ring adhered on a substrate:Calculation of variation with movable boundaries

In this study, we developed a general method to analytically tackle a kind of movable boundary problem from the viewpoint of energy variation. Having grouped the adhesion of a micro-beam, droplet and carbon nanotube （CNT） ring on a substrate into one framework, we used the developed line of reasoning to investigate the adhesion behaviors of these systems. Based upon the derived governing equations and transversality conditions, explicit solutions involving the critical parameters and morphologies for the three systems are successfully obtained, and then the parameter analogies and common characteristics of them are thor- oughly investigated. The presented method has been verified via the concept of energy release rate in fracture mechanics. Our analyses provide a new approach for exploring the mechanism of different systems with similarities as well as for understanding the unity of nature. The analysis results may be beneficial for the design of nano-structured materi- als, and hold potential for enhancing their mechanical, chemical, optical and electronic properties.

Backlash analysis of a new planetary gearing with internal gear ring

Due to low carrying capacity and short life of current ring reducer,we proposed a new planetary gearing with internal gear ring,which consisted of two stages.One was an involute planetary drive and the other was an N-type planetary drive with small teeth difference.The kinematic calculation was conducted based on the analysis of structural composition and working principle.Formulas of backlash calculation for the new planetary gearing were derived by using probabilistic theory and the analytical model was created at the same time.Then,main factors that affect the systematic backlash were introduced and the effects of manufacture error,misaligments and roller bearing parameters on the distribution of backlash were presented.The influence of gear backlash on systematic return difference was performed based on the backlash mathematic model proposed.The results show that the backlash is a little large,of which the backlash of bearing takes a greater part than two gearing stages.So we presented some practical methods to reduce the systematic backlash.

Hexanuclear ring cobalt complex for photochemical CO_(2) to CO conversion

Photosynthesis in nature has been deemed as the most significant biochemical reaction,which maintains a relatively stable content of O_(2) and CO_(2) in the atmosphere.Herein,for a deeper comprehension of natural photosynthesis,an artificial photosynthesis model reaction of photochemical CO_(2) to CO conversion(CO_(2)+2 H^(+)+2e^(-)→CO+H_(2)O)catalyzed by a homogeneous hexanuclear ring cobalt complex{K_(2)[CoO_(3)PCH_(2)N(CH_(2)CO_(2))_(2)]}_(6)(Co6 complex)is developed.Using the[Ru(bpy)_(3)]^(2+)as a photosensitizer and TEOA as a sacrificial electron donor,an optimal turnover frequency of 503.3 h^(‒1) and an apparent quantum efficiency of 0.81%are obtained.The good photocatalytic CO_(2) reduction performance is attributed to the efficient electron transfer between Co6 complex and[Ru(bpy)_(3)]^(2+),which boosts the photogenerated carriers separation of the photosensitizer.It is confirmed by the j‐V curves,light‐assisted UV‐vis curves,steady‐state photoluminescence spectra and real‐time laser flash photolysis experiments.In addition,the proposed catalytic mechanism for CO_(2) reduction reaction catalyzed by the Co6 complex is explored by the potassium thiocyanate poison experiment,Pourbaix diagram and density functional theory calculations.

DYNAMIC STABILITY OF SPINDLE BLADE IN RING SPINNING Zhou Bingrong(Department of Mechanical Engineering)

It is discussed that a tangential force T induces a self-excited vibration in the motion ofspindle blades of a ring spinning frame.Depending on the relative magnitude of the tangentialforce compared with the tangential damping force the motion of blade is either stable orunstable.The chief factors causing the self-excited vibration can also be traced from the charac-ter of the experimental locus.

Quantum spin transport through Aharonov-Bohm ring with a tangent magnetic field

Quantum spin transport in a mesoscopic Aharonov-Bohm ring with two leads subject to a magnetic field with circular configuration is investigated by means of one-dimensional quantum waveguide theory. Within the framework of Landauer-Bfittiker formalism, the polarization direction of transmitted electrons can be controlled either by the AB magnetic flux or by the tangent magnetic field. In particular, the spin flips can be induced by hopping the AB magnetic flux or the tangent field.

GENERAL SOLUTION OF THE OVERALL BENDING OF FLEXIBLE CIRCULAR RING SHELLS WITH MODERATELY SLENDER RATIO AND APPLICATIONS TO THE BELLOWS (Ⅱ)- CALCULATION FOR OMEGA-SHAPED BELLOWS

is one of the applications of (Ⅰ), in which the angular stiffness, the lateral stiffness and the corresponding stress distributions of Omega_shaped bellows were calculated, and the present results were compared with those of the other theories and experiments. It is shown that the non_homogeneous solution of (Ⅰ) can solve the pure bending problem of the bellows by itself, and be more effective than by the theory of slender ring shells; but if a lateral slide of the bellows support exists the non_homogeneous solution will no longer entirely satisfy the boundary conditions of the problem, in this case the homogeneous solution of (Ⅰ) should be included, that is to say, the full solution of (Ⅰ) can meet all the requirements.

GENERAL SOLUTION OF THE OVERALL BENDING OF FLEXIBLE CIRCULAR RING SHELLS WITH MODERATELY SLENDER RATIO AND APPLICATIONS TO THE BELLOWS (Ⅲ)-CALCULATION FOR C-SHAPED BELLOWS

This is one of the applications of Part (Ⅰ), in which the angular stiffness, the lateral stiffness and the corresponding stress distributions of C_shaped bellows were calculated. The bellows was divided into protruding sections and concave sections for the use of the general solution (Ⅰ), but the continuity of the stress resultants and the deformations at each joint of the sections were entirely satisfied. The present results were compared with those of the other theories and experiments, and are also tested by the numerically integral method. It is shown that the governing equation and the general solution (Ⅰ) are very effective.

GENERAL SOLUTION OF THE OVERALL BENDING OF FLEXIBLE CIRCULAR RING SHELLS WITH MODERATELY SLENDER RATIO AND APPLICATIONS TO THE BELLOWS (Ⅳ)-CALCULATION FOR U-SHAPED BELLOWS

This is one of the applications of Part (Ⅰ),in which the angular stiffness, and the corresponding stress distributions of U_shaped bellows were discussed. The bellows was divided into protruding sections, concave sections and ring plates for the calculation that the general solution (Ⅰ) with its reduced form to ring plates were used respectively, but the continuity of the surface stresses and the meridian rotations at each joint of the sections were entirely satisfied. The present results were compared with those of the slender ring shell solution proposed earlier by the authors, the standards of the Expansion Joint Manufacturers Association (EJMA), the experiment and the finite element method. It is shown that the governing equation and the general solution (Ⅰ) are very effective.

F-perfect Rings and Modules

Let R be a ring, and let （F, C） be a cotorsion theory. In this article, the notion of F-perfect rings is introduced as a nontrial generalization of perfect rings and A-perfect rings. A ring R is said to be right dr-perfect if F is projective relative to R for any F ∈ F. We give some characterizations of F-perfect rings. For example, we show that a ring R is right F-perfect if and only if F-covers of finitely generated modules are projective. Moreover, we define F-perfect modules and investigate some properties of them.

GENERAL SOLUTION OF THE OVERALL BENDING OF FLEXIBLE CIRCULAR RING SHELLS WITH MODERATELY SLENDER RATIO AND APPLICATIONS TO THE BELLOWS (Ⅰ)-GOVERNING EQUATION AND GENERAL SOLUTION

The overall bending of circular ring shells subjected to bending moments and lateral forces is discussed. The derivation of the equations was based upon the theory of flexible shells generalized by E.L. Axelrad and the assumption of the moderately slender ratio less than 1/3 (i.e., ratio between curvature radius of the meridian and distance from the meridional curvature center to the axis of revolution). The present general solution is an analytical one convergent in the whole domain of the shell and with the necessary integral constants for the boundary value problems. It can be used to calculate the stresses and displacements of the related bellows. The whole work is arranged into four parts: (Ⅰ) Governing equation and general solution; (Ⅱ) Calculation for Omega_shaped bellows; (Ⅲ) Calculation for C_shaped bellows; (Ⅳ) Calculation for U_shaped bellows. This paper is the first part.

Synchronization of N different coupled chaotic systems with ring and chain connections

Synchronization of N different coupled chaotic systems with ring and chain connections is investigated. The New system, the Chen system, the Lii system, the Lorenz system, and the Rossler system are used as examples in verifying effectiveness of the method. Based on the Lyapunov stability theory, the form of the controller is designed and the area of the coupling coefficients is determined. Simulations indicate that global synchronization of the N different chaotic systems can be realized by choosing appropriate coupling coefficients by using the controller.

NBN-doped nanographene embedded with five-and seven-membered rings on Au(111)surface

Nanographenes(NGs)can be embedded with predesigned dopants or nonhexagonal rings to tailor the electronic properties and provide ideal platforms to study the unique physical and chemical properties.Here,we report the on-surface synthesis of NBN-doped NG embedded with five-and seven-membered rings(NBN-575-NG)on Au(111)from a oligophenylene precursor preinstalled with a NBN unit and a heptagonal ring.Scanning tunneling microscopy and non-contact atomic force microscopy images elucidate the intramolecular cyclodehydrogenation and the existence of the five-and seven-membered rings.Scanning tunneling spectroscopy spectra reveal that the NBN-575-NG is a semiconductor,which agrees with the density functional theory calculation results on a freestanding NBN-575-NG with the same structure.This work provides a feasible approach for the on-surface synthesis of novel NGs containing non-hexagonal rings.

Statistical Properties of a Ring Laser with Injected SIgnal and Backscattering

The statistical properties of a homogeneously broadened ring laser with an injected signal are investigated and the normalized two-mode intensity auto- and cross-correlation functions are calculated by a full saturation laser theory with backscattering. The theoretical predictions are in good agreement with the experimental measurements.Further investigation reveals that the backscattering can reduce the fluctuations in the system while the full saturation effect plays a major role when the laser is operated above threshold. It is also quite important to notice that the injected signal can drive the weak mode from incoherent light to coherent light.

ON THE FORMATION OF VORTEX RINGS AND PAIRS

The axisymmetric vortex sheet model developed by Nitsche and Krasny had been extended to study the formation of vortex rings (pairs) at the edge of circular (2D) tube and opening. Computations based on this model were in good agreement with the experiments (Didden (1979) for circular tube and Auerbach (1987) for 2D tube and opening). Using this new model, evidences are provided to show that the main failure of the similarity theory (the false prediction of axial trajectory of vortex ring) is due to its ignorance of the self-induced ring velocity (mutual induction for vortex pair). The Glezer (1988)'s summary on the influence of piston speed upon the shedding circulation was also discussed, and finally the variation of core distribution of vortex ring with turning angle and piston speed was given. (Edited author abstract) 22 Refs.

弹性环梁支撑下圆形深基坑支护结构变形解析解

将环梁和支护结构分别视为弹性圆环和弹性圆柱薄壳,基于环梁和圆柱壳的变形协调,得到了具有任意数目弹性环梁支撑圆形深基坑支护结构变形的解析解.在验证解析解合理性和可靠性的基础上,针对某一实际圆形基坑工程,比较了在刚性和弹性环梁支撑下支护结构变形和内力的差异,并分析了支护结构底部边界条件、环梁弹性模量、尺寸和数量以及位置等参数对支护结构变形和内力分布的影响.研究结果表明:相对于刚性环梁支撑,弹性环梁支撑处内力变化较小,环梁弹性模量和尺寸的改变只对基坑挖掘面以上支护结构变形和内力影响显著,而对挖掘面以下的支护结构变形和内力几乎没有影响.该研究成果为圆形基坑支护结构设计提供了理论依据和指导.