Physicochemical and Biochemical Characterization, Total Phenolic and Energy Value from Bulbs of Different Onion (Allium cepa L.) Varieties in Senegal

The purpose of this study is to investigate the physicochemical properties of some local varieties of onion (Allium cepa L.) and compare them with an imported variety, all collected in May 2021. Proteins, reducing sugars, lipids, and polyphenol content were estimated according to the AFNOR standardized methods. The determination of calcium, magnesium, iron, sodium, potassium and phosphorus was performed by atomic absorption spectrophotometer coupled with a CCD detector. The results highlighted an average acidity of 0.377% ± 0.002% lower than the value of the imported variety which is 0.520% ± 0.001%. Local varieties have a pH ranging from 6.35 ± 0.003 to 6.42 ± 0.004, while the variety has a pH of 6.36 ± 0.003. The ash and dry matter contents vary respectively from 4.788% ± 0.004% to 8.253% ± 0.003% and 7.945% ± 0.021% to 11.945% ± 0.007% for the local varieties. Moreover, the imported one has ash and dry matter contents of 5.175% ± 0.007% and 10.035% ± 0.021% respectively. The results show that the protein, reducing sugar and lipid contents in the local onion varieties vary respectively from 2.815 ± 0.000 to 15.634 ± 0.001 g·100 g-1;4.691 ± 0.001 to 12.596 ± 0.002 g·100 g-1 and 0.006 ± 0.001 to 0.050 ± 0.057 g·100 g-1. Furthermore, the imported variety has a protein, reducing sugar and lipid content of 5.649 ± 0.002;8.565 ± 0.002 g·100 g-1 and 0.011 ± 0.010 g·100 g-1 respectively. The maximum levels of total polyphenols are obtained in the imported variety, Bellani and Gandiol, respectively 9.973 ± 0.001, 4.535 ± 0.002, and 3.425 ± 0.006 mg EAG/g of dry matter. The local varieties have a significant calorific intake of between 35.451 ± 0.001 and 112.980 ± 0.003 kcal·100 g-1 compared to the imported one with an energy value of 56.953 ± 0.001 kcal·100 g-1 of dry matter. The bulbs of different onion varieties studied have a fairly high content of mineral elements. The potassium content of local varieties is between 502.16 ± 0.06 mg·100 g-1 and 582.77 ± 0.04 mg·100 g-1 while the imported variety has a content of 536.62 ± 1.30 mg·100 g-1. They note that the local varieties have a better calcium content (249.75 ± 0.07 to 434.20 ± 0.57 mg·100 g-1) and magnesium (142.15 ± 0.07 to 162.60 ± 0.42 mg·100 g-1) than the imported variety (229.58 ± 0.04 mg·100 g-1) except for the varieties White Grano (228.29 ± 0.01 mg·100 g-1) and Rouge Amposta (117.00 ± 0.42 mg·100 g-1) respectively. These results reveal that Gandiol, Dayo and Orient F1 are nutritionally found better due to their higher antioxidant property, proteins, carbohydrates, and reducing sugar and should be included in diets to supplement our daily allowance needed by the body.

Characterization of Wastewater in School Environments for an Ecological Treatment Solution: A Case Study of Ndiebene Gandiol 1 School

The study conducted at Ndiebene Gandiol 1 school in Senegal has unveiled serious environmental and public health challenges. The wastewater analysis revealed high levels of Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and fecal coliforms, signaling potential risks to the well-being of students and staff. This situation mirrors a wider issue in rural educational settings, where inadequate sanitation persists. Intensive wastewater treatment options are known for their effectiveness against high pollutant loads but are resource-intensive in both energy and cost. Conversely, extensive treatment systems, while requiring more land, provide a sustainable alternative by harnessing natural processes for pollutant removal. The research suggests a hybrid treatment approach could serve the school’s needs, balancing the robust capabilities of intensive methods with the ecological benefits of extensive systems. Such a solution would need to be tailored to the specific environmental, financial, and logistical context of the school, based on comprehensive feasibility studies and stakeholder engagement. This study’s findings underscore the urgency of addressing sanitation in schools, as it is intrinsically linked to the health and academic success of students. Quick, effective, and long-term strategies are vital to secure a healthier and more prosperous future for the youth. With proper implementation, the school can transform its sanitation facilities, setting a precedent for rural educational institutions in Senegal and similar contexts globally.

Phenotypic Characterization and QTL/Gene Identification for Internode Number and Length Related Traits in Maize

Internode number and length are the foundation to constitute plant height, ear height and the above-ground spatial structure of maize plant. In this study, segregating populations were constructed between EHel with extremely low ear height and B73. Through the SNP-based genotyping and phenotypic characterization, 13 QTL distributed on the chromosomes (Chrs) of Chr1, Chr2, Chr5-Chr8 were detected for four traits of internode no. above ear (INa), average internode length above ear (ILaa), internode no. below ear (INb), and average internode length below ear (ILab). Phenotypic variation explained (PVE) by a single QTL ranged from 6.82% (qILab2-2) to 12.99% (qILaa5). Zm00001d016823 within the physical region of qILaa5, the major QTL for ILaa with the largest PVE was determined as the candidate through the genomic annotation and sequence alignment between EHel and B73. Product of Zm00001d016823 was annotated as a WEB family protein homogenous to At1g75720. qRT-PCR assay showed that Zm00001d016823 highly expressed within the tissue of internode, exhibiting statistically higher expression levels among internodes of IN4 to IN7 in EHel than those in B73 (P Zm00001d016823 might provide novel insight into molecular mechanism beyond phytohormones controlling internode development in maize.

Granulometric and Mineralogical Characterization of the Sands of the Middle Course of the Kasai River (Territory of Ilebo, Province of Kasai/DR Congo)

The sand bars, in perpetual transformation, observable in the middle course of the Kasai river on the section between the city of Ilebo (pk605) to the confluence of the Loange river (pk525), pose enormous navigability problems. This may be dependent on hydrosedimentological characteristics of the Kasai River. This abundance of sand thus conditions the morphology of the middle course of the Kasai River in the section under our study. It therefore constitutes sedimentary navigation obstacles. The objective of this study is the granulometric and mineralogical characterization of the bar sands of the Kasai River in this study section. Particle size analyzes reveal these are moderately well classified to well classified unimodal sands (Classification coefficient between 1.29 to 1.742) largely presenting grain size symmetry and rarely fine asymmetry (Asymmetry coefficient—Skewness between −0.197 to 0.069) with mesorkurtic and rarely leptokurtic and platykurtic acuity (Angulosity coefficient—Kurtosis between 0.814 to 1.323). All these parameters evolve in sawtooth patterns from upstream to downstream. And then, an automated mineralogical analysis of the sands of the Kasaï River using a Qemscan FEG Quanta 650 made it possible to determine a very varied mineralogical procession with a sawtooth evolution. It is largely dominated by quartz (between 93.73% and 99.07%), followed by calcite (0.01% - 2.66%), iron oxides (0.01% - 1.88%), orthoclase (0.04% - 0.99%), plagioclase (0.01% - 0.75%) and Kaolinite (0.18% - 0.71%). Finally, this mineralogical procession is characterized by a group of minerals which do not reach the threshold of 0.55% such as: illite, apatite, ilmenite, muscovite, chlorite, biotite, montmorillonite, rutile, pyrophyllite, siderite, zircon and dolomite. The evolution of the mineralogical procession of the sands of the bars is not as clear as in the case of particle size parameters.

Clay Materials for Ceramics Application from N’Djamena in the Chad Republic: Mineralogical, Physicochemical and Microstructural Characterization

Herein, we report some characteristics of the clayey materials (CMs) collected from Kaliwa (C1), Kabé (C2) and Malo (C3) district in N’Djamena (Chad). Three samples were characterized applying XRF, XRD, FTIR, SEM. In addition, TGA/DSC were performed to control decomposition/mass loss and show phase transitions respectively of CMs. Geochemical analysis by XRF reveals the following minerals composition: SiO2 (~57% - 66%), Al2O3 (~13% - 15%), Fe2O3 (~6% - 10%), TiO2 (~1% - 2%) were the predominant oxides with a reduced proportion in C1, and (~7%) of fluxing agents (K2O, CaO, Na2O). Negligible and trace of MgO (~1%) and P2O5 was noted. The mineralogical composition by XRD shows that, C1, C2 and C3 display close mineralogy with: Quartz (~50%), feldspar (~20%) as non-clay minerals, whereas clays minerals were mostly kaolinite (~15%), illite (~5%) and smectite (~10%). FTIR analysis exhibits almost seemingly similar absorption bands characteristic of hydroxyls elongation, OH valence vibration of Kaolinite and stretching vibration of some Metal-Oxygen bond. SEM micrographs of the samples exhibit microstructureformed by inter-aggregates particles with porous cavities. TGA/DSCconfirm the existence of quartz (570˚C to 870˚C), carbonates (600˚C - 760˚C), kaolinite (569˚C - 988˚C), illite (566˚C - 966˚C), MgO (410˚C - 720˚C) and smectite (650˚C - 900˚C). The overall characterization indicates that, these clayey soils exhibit good properties for ceramic application.

Method and Description of Sedimentary System Characterization Based on Sequence Stratigraphy

A Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. By combining well seismic analysis, the middle section of Shahejie-3 is divided into high-level system tract and forced lake retreat system tract, corresponding to the II oil formation and I oil formation, respectively. Using sequence stratigraphy methods, based on seismic profiles and drilling lithological cycles, the high stand system tract is divided into 5 stages of delta progradation. The first and second stages are high angle S-type progradation with large sedimentary thickness, the third stage is oblique progradation, and the fourth and fifth stages are S-oblique composite progradation;By combining seismic data, we characterized the large-scale (8 small-scale) progradation bodies of 5 periods, clarified the distribution characteristics of reservoir planes, and laid the foundation for the later exploration of oilfield potential.

Phenotypic and Molecular Characterization of Staphylococcaceae and Enterobacteriaceae Species Isolated from Smoked, Dried, and Braised Fish Marketed in Ouagadougou

Background: To preserve its nutritional properties, fish must have good sanitary quality. The objective of this study was to investigate some pathogens contaminating smoked, dried, and braised fish marketed in Ouagadougou. Methodology: Potential pathogens of Enterobacteriaceae and Staphylococcus were screened in eight (8) species of processed fish. The investigation of the germs was carried out following the normative methods of microbiology. The identities of the strains were determined by API 20 E (BioMerieux S.A., France) and API STAPH (BioMerieux S.A., France) kits for Enterobacteriaceae and Staphylococcus species respectively. The uidA gene profile in Escherichia coli isolates was determined by simplex PCR. The identity of Staphylococcus aureus was confirmed by amplification of specific 23S rDNA regions and nuc gene profile with PCR. Results: A total of 235 fish samples were analyzed. A diversity of Enterobacteriaceae and Staphylococcus was detected. Twenty species of Enterobacteriaceae were identified among which, the most frequent were Escherichia coli, Salmonella sp, Raoultella ornithinolytica and Serratia odorifera, respectively in 22.6%, 4.3%, 28.9%, 17.4% of the samples analyzed. However, eleven species of Staphylococcus were identified among which, Staphylococcus xylosus, Staphylococcus aureus, Staphylococcus lugdunensis, and Staphylococcus sciuri were the most frequent with respective percentages of 47.7%, 23.4%, 12.8% and 10.6% of samples. For all the samples, the species frequently isolated were: Raoultella ornithinolytica, Escherichia coli, Serratia odorifera, Staphylococcus aureus, Staphylococcus xylosus, and Staphylococcus lugdunensis. The uidA gene specific to Escherichia coli was detected in 82.85% of strains (29/35). Amplification of the specific 23S rDNA region using staur primers was observed in 98% (49/50) of the isolated Staphylococcus aureus strains and the nuc gene was detected in 86% of Staphylococcus aureus strains. Conclusion: The isolated bacteria are potential pathogens involved in foodborne illnesses and intoxications. Effective sanitary safety systems must be implemented to guarantee the sanitary quality of fish supplied to consumers.

超长柔性悬挂固体充填刮板输送机异常工况表征及自主调控方法

固体充填刮板输送机是固体充填开采技术的关键装备,其高效智能化的程度制约着固体智能充填开采技术的进步,暂难突破超大采长、大功率、高可靠性的瓶颈,运行状态受地质条件、充填工艺等主控因素影响显著,异常工况自主调控问题亟待解决。总结了固体充填刮板输送机特征;构建了固体充填刮板输送机位姿形态与运输状态表征方法;通过分析异常工况的形成机理,选取异常工况判别指标,结合位姿与运输状态表征方法,给出了其空间位姿、牵引状态等异常工况判别准则与典型异常工况的调控路径,揭示了多工况状态下固体充填刮板输送机运载调控机制,提出了实时调控充填材料运输量、直线及水平程度组合的异常工况自主调控方法。全国首个260 m工作面长固体充填工程案例表明:通过异常工况自主调控,平均最大水平偏移距每减少100 mm,刮板链牵引力可减少85 kN,输送功率损耗可减少55 kW;平均最大垂直偏移距每减小100 mm时,输送功率损耗可减少7.2 kW;单位长度货载运量每减少100 kN/m,刮板链牵引力可减少31.9 kN,输送功率损耗可减少38.2 kW。所提出的异常工况自主调控方法可显著提升固体充填刮板输送机的输送效能,可助力实现固体智能充填开采。

九蒸九制对黄精中AGEs含量、多糖结构及体外活性的影响

为初步判断九蒸九制黄精多糖含量下降的主要原因及九蒸九制对黄精多糖体外活性的影响,本文测定了九蒸九制黄精中5-羟甲基糠醛(5-HMF)及晚期糖基化终产物(AGEs)的含量,考察了九蒸九制前后黄精纯化多糖的结构变化,并分析这些变化对黄精体外活性的影响。结果表明九蒸九制黄精发生了美拉德反应,5-HMF含量为(631.3±21.5)μg/g,羧甲基赖氨酸(CML)和羧乙基赖氨酸(CEL)含量分别为(342.4±11.3)μg/g和(63.7±9.8)μg/g。并对黄精多糖的结构及组成产生了不同程度的影响,葡萄糖(Glc)含量有所增长,甘露糖(Man)及半乳糖醛酸(GalUA)的含量有明显降低,Man从34.53%降至17.06%,GalUA从9.59%降至1.77%。研究表明,黄精在九蒸九制的加工过程中发生了美拉德反应,并产生了一定量的AGEs,同时,九蒸九制法在一定程度提高了黄精多糖的体外降糖活性。

Characterization of Atypical Individuals of Lannea in Burkina Faso

Background and Objectives: The species to the Lannea genus are trees, shrubs with compound leaves. Thus, individuals called atypical Lannea with single leaves and of socio-economic interests have been identified in the central plateau region (Burkina Faso). This study aimed to contribute to the identification of atypical species. Material and Methods: The Polymerase Chain Reaction (PCR) method using specific primers was performed and consisted of extracting DNA from young leaves of Lannea individuals, amplifying and then sequencing portions of discriminating DNA (matK, rbcL and rps16). Results: It was shown that individuals belong to the Lannea genus, but are subdivided into three subgroups: a first subgroup containing Lannea microcarpa and two subgroups with no previously identified Lannea species. Conclusion: These atypical individuals are ecotypes or mutants of Lannea microcarpa.

Morpho-Physiological and Biochemical Characterization of Soybean-Associated Rhizobia and Effect of Their Liquid Inoculant Formulation on Nodulation of Host Plants in the Cameroon Cotton Fields Zone

The aim of this research was to assess the diversity of the Cameroon cotton zone in soybean associated rhizobia in order to formulate the most efficient elite inoculant to boost both the cotton and soybean production. Therefore, soybean associated rhizobia were isolated and characterized morphologically, physiologically and biochemically on YEMA culture media. For each of the two soybean varieties (Houla1 and TGX1910 14F) used, the trials were laid out in two IRAD-fields of North Cameroon (Sanguere-Paul) and Far-North (Soukoundou) respectively, under a complete randomized complete block design, the isolate formulations representing the treatments. The six isolated strains (IS1, IS2, IS3, IS4, IS5, IS6) from which seven liquid inoculant were formulated were revealed to belong to the same slow growing group of rhizobia, with a high level of tolerance to temperature, pH, and salinity, with optimum growth at respectively 28˚C, pH (7 - 9), salt (1% - 5%). Not surprisingly, root nodules were formed by both inoculated and uninoculated soybean plants. However, the most efficient soybean-rhizobia symbiosis for nodulations were isolate IS6 associated to TGX1910 14F variety, and isolate IS5 associated to Houla1variety at Sanguere-Paul. Whereas isolate M was associated to TGX1910 14F variety, Houla 1 variety had affinity with native rhizobia isolates at Soukoundou. The present results suggest the adaptability of rhizobia isolates to a particular soybean variety at a particular cotton fields zone. These findings should be taken into consideration for commercial inoculant formulation.

Characterization of the Natural and Organomodified Clay Soil of Moukosso (Republic of Congo) by Dimethylsulfoxide: Application to the Adsorption of Lead (II) in Aqueous Solution

In this study, the authors characterized the raw clayey soil of Moukosso and modified by dimethylsulfoxide (DMSO) by several analytical methods, namely: X-ray diffraction (XRD), Fourier transform infrared (FTIR) and gravimetric thermal analysis (TGA). The cation exchange capacity (CEC) was also determined. Mineralogical analysis by XRD revealed the presence of muscovite (29.7%), kaolinite (8.9%), anatase (2.4%) and quartz (58.9%). The characterization of the organo-clay by infrared and by thermogravimetric analysis confirmed the intercalation of DMSO by the presence of vibration bands at 1008 cm-1 and 1070 cm-1 and a strong increase in the loss of mass. The cation exchange capacity of the raw material is 7.4 meq/100g. Rapid adsorption of Pb2+ ions was observed between 5 and 15 minutes of stirring time in both cases (raw clay and organomodified clay). The modeling of the isotherms by the models of Langmuir and Freudlich showed that these are of type S with a maximum amount of adsorption of 22.471 mg/g for the fine fraction and 41.493 mg/g for the clay intercalated with DMSO. Langmuir’s model best reproduces the experimental data of this study.

Physic, Chemical and Mineralogical Characterizations of Clays Used in the Making of Traditional Ceramics in the City of Katiola, C ôte d’Ivoire

In C ?te d’Ivoire, traditional ceramics are widely used in the form of pottery. The latter is used to store food, water and cereals. Analyzes (X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), inductive plasma optical emission spectrometry (ICP-OES), scanning electron microscopy (SEM) and analysis thermal gravimetric (ATG)) were carried out to determine the morphology, the chemical, physical and pedological constituents of these raw materials. It appears from this study that the clays used in the Mangoro pottery of Katiola contain silica SiO2, alumina Al2O3 and iron oxide Fe2O3 as well as kaolinite, muscovite, smectite and quartz.

Physico-Chemical Characterization of Nine Agricultural Biomasses of the Togolese Flora

Green coal or bio-coal is coal produced with rich biodegradable materials, elaborated from agricultural and household residues with a high percentage of carbon. This green charcoal (fuel briquettes) is an alternative to charcoal. Well known for its contribution to greenhouse gas emissions, charcoal is one of the causes of tree felling. The valorization of waste by the manufacture of biofuels could be an alternative to the use of charcoal. The general objective of the present study is the valorization of nine biomasses from Togo as raw materials. Specifically, physico-chemical characteristics such as dehydration, acidity, and conductivity were determined. Information on the structure and composition of the biomass was found. These data on the nature of the biomass were found through the use of Fourier Transform Infrared (FTIR) and Thermogravimetry (TGA). The promising results inform on the nature of the analyzed samples and allow the selection of the best biomass which would give an important thermal conductivity for the manufacture of the briquettes, but also of the binders to be used according to the physico-chemical characteristics like the pH.

基于事故表征和案例推理的煤矿瓦斯爆炸预测研究

为更好地通过案例预测煤矿瓦斯爆炸事故结果,在融合事故树分析和防御性悲观思想后,提出煤矿瓦斯爆炸事故表征方法,包括事故表征结构模型、表征规范和案例库编码规则;为提升案例推理精度,通过专家置信度改进层次分析法的主观影响,提出针对不同类型表征信息的相似度计算方法,引入时间衰退系数修正案例时效性。通过山西某煤矿瓦斯爆炸事故案例对该方法进行验证,结果表明,该方法的预测结果与实际结果相吻合,并能推荐事故预防措施。研究结果可为煤矿安全管理提供支持。

基于图像识别的叶丝形态表征及其数值模拟

【背景和目的】研究一种叶丝颗粒的粒度和粒形表征方法,表征结果可用于其数值模拟的建模。【方法】采用图像分析技术,确定分散放置在二维平面上的每根叶丝的等面积圆当量径、最大弗雷特(Feret)径、圆形度和纵横比。【结果】(1)利用提出的叶丝颗粒图像采集和处理方法,通过对叶丝样品数据的统计分析,确定叶丝物料粒度和粒形的概率密度分布曲线,实现了长丝、中丝、短丝和碎丝4种长度叶丝物料的颗粒粒度和粒形表征,表征参数可定量的反映不同样品的颗粒尺寸和形状的差异。(2)离散单元法数值模拟结果表明叶丝的粒度和粒形性质对物料堆积高度有重要影响。本文基于实验测量得到的粒度和粒形概率分布曲线,生成了与实际形态分布一致的叶丝颗粒的数值模型,数值模拟结果与实验结果的偏差在1.3%以内。【结论】提出的方法从粒度和粒形对叶丝颗粒进行定量表征,表征结果一方面能反映不同物料的性质差异,另一方面可直接用于建立与实际情况接近的数值模型,从而准确预测不同长度叶丝颗粒的堆积高度。

Design and Characterization of an Aerosol Test Chamber for Emergency Response Patient Contamination Control Simulation and Research

Contaminated or infected patients present a risk of cross-contamination for emergency responders, attending medical personnel and medical facilities as they enter a treatment facility. The controlled conditions of an aerosol test chamber are required to examine factors of contamination, decontamination, and cross-contamination. This study presents the design, construction, and a method for characterizing an aerosol test chamber for a full-sized manikin on a standard North Atlantic Treaty Organization litter. The methodology combined air velocity measurements, aerosol particle counts and size distributions, and computational fluid dynamics modeling to describe the chamber’s performance in three dimensions. This detailed characterization facilitates future experimental design by predicting chamber performance for a variety of patient-focused research.

Personality Traits, Thinking Styles, and Emotional Intelligence in Nursing, towards Healthcare Providers’ Characterization and Safer Patient Care

Background: This study explored nursing personality traits (Big Five Inventory BFI), emotional intelligence (EI), and thinking styles (Rational, RS, and Experiential, ES) together with demographic data to see how they could relate and the implication of this on nurses and patient safety. Design: A cross-sectional study. Methods: Nursing sample (n = 435). Participants completed a self-report online survey, which included demographic information, followed by questionnaires to measure personality traits, thinking styles, and emotional intelligence. Results: Spearman’s rank correlation was computed to assess the relationship between EI and Extraversion;there was a moderate positive correlation between the two variables, r = 0.487, p r = 0.731, p r = 0.723, p r = -0.666, p r = 0.467, p Conclusion: Different studies consolidated each other, and all converge and channel into the concept of characterization of healthcare providers for better support to them and safer patient care. EI correlated with all BFI components, and both positively impacted all desirable behaviors. Therefore, it would be valuable if organizations invested in increasing EI in their providers as it might highlight areas for improvement and equip providers with appropriate and advantageous coping strategies.

五倍子单宁酸微胶囊的制备、性质表征及“双抗”活性评估

为掩蔽单宁酸的涩味,提高其接受性,并且提高其生物活性的稳定性,该文以魔芋葡甘聚糖为壁材,并结合冷冻干燥技术进行单宁酸微胶囊的制备。以单宁酸包埋率为评价指标优化包埋工艺,并对微胶囊的微观形态、结构、热力学性能、缓释性以及抗氧化性和抑菌活性进行综合分析。结果表明,单宁酸微胶囊的最佳制备工艺为:芯壁比1∶15(质量比),壁材质量浓度20 g/L,反应温度45℃,搅拌时间2.0 h,在此条件下制备的单宁酸包埋率为75.33%;呈无规则状,表面稍有裂缝。红外光谱及差式扫描量热分析均表明,单宁酸成功地被封装于胶囊内,且具有良好的热性能。与未处理的单宁酸相比,单宁酸微胶囊化后具有一定的缓释作用,单宁酸组以及微胶囊组在口腔消化阶段的质量浓度分别为0.98、0.57 mg/m L,有效解决单宁酸适口性的问题。包埋后并没有影响单宁酸的抗氧化性和抗菌生物活性,单宁酸对DPPH自由基、ABTS阳离子自由基清除率IC_(50)值分别为9.20、9.58μg/m L,单宁酸微胶囊则分别为9.08、8.99μg/m L;且单宁酸微胶囊化前后对4种肠道致病菌的均具有一定的抑菌作用,其中对金黄色葡萄球菌和大肠杆菌的抑制作用较强,单宁酸对金黄色葡萄球菌和大肠杆菌的抑菌率达(87.06±2.28)%、(84.44±6.85)%,而微胶囊的抑菌率分别为(96.02±3.11)%、(79.34±3.97)%,单宁酸能够使细菌的细胞膜受损,影响细菌的生长繁殖,起到较好的抑菌作用。因此,单宁酸微胶囊化为单宁酸在不同领域中的应用提供了有益的思路。

原子级制造测量与表征研究现状综述

原子级制造是指将能量作用于原子,通过原子级材料的可控去除或者原子/分子级结构的大规模操控及组装,实现产品性能与功能跃迁的前沿制造技术,是一种可以大规模、批量化的先进制造技术。该过程需要在10-10m空间尺度下精确操控原子。同时,制造过程中原子的键合时间、电子动力学变化均发生在飞秒(10-15s)至阿秒(10-18s)量级。因此,只有具备超快时间和空间分辨在线检测与表征能力,才能够深入了解并利用原子级制造过程中原子尺度的新原理、新效应,保障原子级制造的可达性与可控性;只有实现原子级制造过程的高通量、大范围的在线监测,才能保障原子级制造的可靠性。基于此,原子级制造的测量与表征是指在原子级的时间、空间、能量尺度上对材料、结构或器件进行精确的测量和表征,以保障原子级制造的可达性、可控性与可靠性。本文介绍了原子级制造所需的测量表征手段的研究现状,从原子级超快动力学过程观测、原子结构演变原位表征、原子级制造过程在线质量监测三大方向进行系统梳理,总结了目前原子级制造测量与表征的挑战并针对未来发展给出建议。