期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
(复合)土工膜防渗土石坝饱和非饱和渗流特性 被引量:23
1
作者 岑威钧 王蒙 杨志祥 《水利水电科技进展》 CSCD 北大核心 2012年第3期6-9,共4页
分别采用完全饱和渗流及饱和非饱和渗流有限元计算理论,对(复合)土工膜防渗土石坝进行渗流场仿真分析,重点研究土工膜等效处理时不同厚度放大倍数下大坝渗流场变化规律,同时结合坝体土石料不同渗透特性,计算得到大坝渗流量和浸润线与... 分别采用完全饱和渗流及饱和非饱和渗流有限元计算理论,对(复合)土工膜防渗土石坝进行渗流场仿真分析,重点研究土工膜等效处理时不同厚度放大倍数下大坝渗流场变化规律,同时结合坝体土石料不同渗透特性,计算得到大坝渗流量和浸润线与土工膜厚度放大倍数之间的关系,并比较了按完全饱和渗流理论与饱和非饱和渗流理论计算结果的差别。结果表明:在坝体土石料渗透特性相同的情况下,土工膜不同厚度放大倍数时浸润线仅在土工膜等效区有较大差别,在膜后坝体部位基本保持不变;大坝渗流量与土工膜厚度放大倍数及坝体填料的渗透特性相关,按饱和渗流理论计算所得的大坝渗流量大于按饱和非饱和渗流理论计算得到的渗流量。 展开更多
关键词 (复合)土工膜 土石坝 饱和渗流 饱和非饱和渗流 等效算法 有限元模拟
下载PDF
土石坝防渗(复合)土工膜缺陷及其渗漏问题研究进展 被引量:40
2
作者 岑威钧 《水利水电科技进展》 CSCD 北大核心 2016年第1期16-22,共7页
在国内外众多土石坝采用(复合)土工膜防渗的工程背景下,分析了坝面或坝内土工膜缺陷的类型及产生缺陷的原因。归纳总结了国内外已有(复合)土工膜缺陷渗漏问题的研究成果,认为现有研究成果不适用于解决高土石坝复合土工膜的缺陷渗漏问题... 在国内外众多土石坝采用(复合)土工膜防渗的工程背景下,分析了坝面或坝内土工膜缺陷的类型及产生缺陷的原因。归纳总结了国内外已有(复合)土工膜缺陷渗漏问题的研究成果,认为现有研究成果不适用于解决高土石坝复合土工膜的缺陷渗漏问题。同时认为高土石坝复合土工膜的缺陷演化规律、缺陷渗漏对坝体渗流场分布及对大坝安全的影响,以及如何采取有效的限渗减漏措施预防和减小缺陷渗漏量,已成为高土石坝复合土工膜防渗工程发展的瓶颈。为此,建议对复合土工膜的缺陷渗流特性进行试验研究,同时采用理论分析、数值模拟和工程实例反馈分析等手段对土石坝中复合土工膜的缺陷渗流及缺陷演化等相关问题进行系统研究,以便为复合土工膜防渗高土石坝的渗漏安全评判、预防及修复等方面起到理论指导作用。 展开更多
关键词 土石坝 (复合)土工膜 缺陷渗漏 模型试验 数值模拟 反馈分析
下载PDF
堤坝中防渗(复合)土工膜的布置型式及计算理论研究 被引量:18
3
作者 岑威钧 沈长松 +1 位作者 李星 杨子涛 《红水河》 2004年第3期70-74,共5页
复合土工膜作为一种良好的防渗材料可以布置在堤坝的上游面,有时还兼作铺盖进行联合防渗,也可以布置在堤坝的中间作为防渗心墙使用。结合(复合)土工膜的受力特性,分别论述了曲线交会法和有限元法选择(复合)土工膜的两种计算方法。在有... 复合土工膜作为一种良好的防渗材料可以布置在堤坝的上游面,有时还兼作铺盖进行联合防渗,也可以布置在堤坝的中间作为防渗心墙使用。结合(复合)土工膜的受力特性,分别论述了曲线交会法和有限元法选择(复合)土工膜的两种计算方法。在有限元法中,详细给出了用柔索单元模拟土工膜的计算过程,最后用工程实例说明了该法的可行性。 展开更多
关键词 (复合)土工膜 布置型式 曲线交会法 有限元法 柔索单元 安全系数
下载PDF
Probabilistic analysis of random contact force between geomembrane and granular material 被引量:2
4
作者 姜晓桢 束一鸣 《Journal of Central South University》 SCIE EI CAS 2014年第8期3309-3315,共7页
A probabilistic method based on principle of maximum entropy was employed to analyze the randomness of contact force between geomembrane and granular material.The contact force distribution is exponential according to... A probabilistic method based on principle of maximum entropy was employed to analyze the randomness of contact force between geomembrane and granular material.The contact force distribution is exponential according to the proposed method and the grain size is the most important factor that affects the distribution of contact force.The proposed method is then verified by a series of laboratory experiments using glass beads and cobbles as granular material and a very thin pressure,indicating that film is firstly used in these experiments which give a reliable method to measure the contact force at each contact point. 展开更多
关键词 GEOMEMBRANE granular material contact force probability density function
下载PDF
Probabilistic analysis of geomembrane puncture from granular material under liquid pressure 被引量:1
5
作者 姜晓桢 束一鸣 朱俊高 《Journal of Central South University》 SCIE EI CAS 2013年第11期3256-3264,共9页
A simplified probabilistic analysis of geomembrane punctures from granular material was presented when subjected to liquid pressure.The probability distribution of contact force between geomembrane and granular materi... A simplified probabilistic analysis of geomembrane punctures from granular material was presented when subjected to liquid pressure.The probability distribution of contact force between geomembrane and granular material was obtained based on the principle of equal probability and assumptions that grains are spheres with constant size.A particle flow code PFC3Dwas employed to simulate the contact process which indicates a good agreement with the theoretical probabilistic analysis.The odds of geomembrane puncture from grains of constant size were obtained by evaluating the puncture force which should not exceed the puncture resistance of geomembrane.The effects of grain radius,grain rigidity and liquid pressure were studied in more detail and displayed in graphs.Both high-level of liquid pressure and large grain can result in high risk of geomembrane puncture.The influence of grain rigidity on the geomembrane puncture odds is significant.For granular material with a grain size distribution,the geomembrane puncture odds can be estimated by the grain size distribution,served as weight function and it is a cautious design if the largest grain is chosen as the design grain size. 展开更多
关键词 geomembrane puncture probability distribution contact force
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部