This paper concerns the existence of multiple homoclinic orbits for the second-order Hamiltonian system-L（t）z＋Wz（t,z）=0,where L∈C（R,RN2）is a symmetric matrix-valued function and W（t,z）∈C1（R×RN,R）is a...This paper concerns the existence of multiple homoclinic orbits for the second-order Hamiltonian system-L（t）z＋Wz（t,z）=0,where L∈C（R,RN2）is a symmetric matrix-valued function and W（t,z）∈C1（R×RN,R）is a nonlinear term.Since there are no periodic assumptions on L（t）and W（t,z）in t,one should overcome difficulties for the lack of compactness of the Sobolev embedding.Moreover,the nonlinearity W（t,z）is asymptotically linear in z at infinity and the system is allowed to be resonant,which is a case that has never been considered before.By virtue of some generalized mountain pass theorem,multiple homoclinic orbits are obtained.展开更多
The influence of sintering temperature, carbon content and dispersive agent in bail-milling was investigated on the properties of LiFePO4/C prepared using Fe2O3, NH4H2PO4, Li2CO3 and glucose via solid state reaction. ...The influence of sintering temperature, carbon content and dispersive agent in bail-milling was investigated on the properties of LiFePO4/C prepared using Fe2O3, NH4H2PO4, Li2CO3 and glucose via solid state reaction. X-ray powder diffraction, scanning electron microscopy and charge-discharge test were applied to the characterization of the LiFePO4/C samples synthesized under different conditions. Sintering temperature affects the crystallite/ particle size and degree ofcrystallinity of LiFePO4, formation of Fe2P and maintenance of carbon in LiFePO4/C. Car- bon maintenance is favored by low sintering temperature, and 700 ℃ is optimum for synthesis of LiFePO4/C with superior electrochemical performance. A higher carbon content in the range of 4.48%-11.03% results in a better rate capability for LiFePO4/C. The dispersive agent used in ball-milling impacts the existent state of carbon in the final product which subsequently determines its charge-discharge behavior. The sample prepared at 700 ℃ by using acetone as the dispersive agent in ball-milling exhibits an excellent rate capability and capacity retention without any fade at 0.1 C, 1C and 2C, with corresponding average discharge capacities of 153.8, 128.3 and 121.0 mA·h·g-1. rest2ectivelv, in the first 50 cvcles.展开更多
Abstract： In this paper, we are interested in the existence and multiplicity results ofnontrivial solutions to nonhomogeneous singularelliptic systems with critical C-K-N exponent（λ1,λ2）.With the help of the Neha...Abstract： In this paper, we are interested in the existence and multiplicity results ofnontrivial solutions to nonhomogeneous singularelliptic systems with critical C-K-N exponent（λ1,λ2）.With the help of the Nehari manifold and under sufficient conditions on the parameters λ1 and λ2, we prove some existence results.展开更多
[ Objective] The aim was to find optimum reaction conditions for synthetic process of Vitamin C. [ Method] Vitamin C sodium was used as raw material to prepare vitamin C through acidification, separation, desalination...[ Objective] The aim was to find optimum reaction conditions for synthetic process of Vitamin C. [ Method] Vitamin C sodium was used as raw material to prepare vitamin C through acidification, separation, desalination, recovery and purification. The impact of reaction time, tempera-ture, feedstock molar ratio and water content on the yield of vitamin C were investigated in the experiment. [Result] The optimum reaction condi- tions for synthetic process of Vitamin C were as follows： in the acidification test, reaction time 120 min, temperature 20 -30 ℃, the molar ratio be-tween hydrochloric acid and Vitamin C sodium 1 ： 1 and water content 41.0%. Under the above condition, the purity and yield of vitamin C reach 99.80% and 94.74% respectively. [Conclusion] The process can decrease consumption, enhance quality and recover of the product, improve the environmental pollution, shorten processing periods and reduce production cost. Thus, the process is suitable for industrialization. Key words Vitamin C; Vitamin C sodium; Acidification; China展开更多
The authors present a new queueing model with （e, d） setup time. Using the quasi-birth-and-death process and matrix-geometric method, the authors obtain the stationary distribution of queue length and the LST of wai...The authors present a new queueing model with （e, d） setup time. Using the quasi-birth-and-death process and matrix-geometric method, the authors obtain the stationary distribution of queue length and the LST of waiting time of a customer in the system. Furthermore, the conditional stochastic decomposition results of queue length and waiting time are given.展开更多
In this paper, we investigate diamond crystallization in Fe-Ni-C with an aluminum additive and the capability of aluminum for converting graphite to diamond in a series of experiments at 4.9-5.5 GPa and 1240-1500℃. O...In this paper, we investigate diamond crystallization in Fe-Ni-C with an aluminum additive and the capability of aluminum for converting graphite to diamond in a series of experiments at 4.9-5.5 GPa and 1240-1500℃. Our experimental results show that the growth habits of diamond crystal have been significantly influenced by the addition of aluminum as a catalyst. The crystal color changes from yellow to nearly colorless. The morphology of the synthesized diamond crystals gradually changes from cubic-octahedron to octahedron in the Fe-Ni-C systems with increasing aluminum additive. The lowest synthesis conditions fell first and then rose with increasing aluminum. We found a suitable addition of aluminum is very effective in lowering the synthesis conditions while an excessive aluminum additive may have a suppressive effect on the diamond nucleation.展开更多
文摘This paper concerns the existence of multiple homoclinic orbits for the second-order Hamiltonian system-L（t）z＋Wz（t,z）=0,where L∈C（R,RN2）is a symmetric matrix-valued function and W（t,z）∈C1（R×RN,R）is a nonlinear term.Since there are no periodic assumptions on L（t）and W（t,z）in t,one should overcome difficulties for the lack of compactness of the Sobolev embedding.Moreover,the nonlinearity W（t,z）is asymptotically linear in z at infinity and the system is allowed to be resonant,which is a case that has never been considered before.By virtue of some generalized mountain pass theorem,multiple homoclinic orbits are obtained.
基金Supported by the Natural Science Foundation of Yunnan Province(2010ZC051)the Analysis and Testing Foundation(20140439)the Starting Research Fund from Kunming University of Science and Technology(14118245)
文摘The influence of sintering temperature, carbon content and dispersive agent in bail-milling was investigated on the properties of LiFePO4/C prepared using Fe2O3, NH4H2PO4, Li2CO3 and glucose via solid state reaction. X-ray powder diffraction, scanning electron microscopy and charge-discharge test were applied to the characterization of the LiFePO4/C samples synthesized under different conditions. Sintering temperature affects the crystallite/ particle size and degree ofcrystallinity of LiFePO4, formation of Fe2P and maintenance of carbon in LiFePO4/C. Car- bon maintenance is favored by low sintering temperature, and 700 ℃ is optimum for synthesis of LiFePO4/C with superior electrochemical performance. A higher carbon content in the range of 4.48%-11.03% results in a better rate capability for LiFePO4/C. The dispersive agent used in ball-milling impacts the existent state of carbon in the final product which subsequently determines its charge-discharge behavior. The sample prepared at 700 ℃ by using acetone as the dispersive agent in ball-milling exhibits an excellent rate capability and capacity retention without any fade at 0.1 C, 1C and 2C, with corresponding average discharge capacities of 153.8, 128.3 and 121.0 mA·h·g-1. rest2ectivelv, in the first 50 cvcles.
文摘Abstract： In this paper, we are interested in the existence and multiplicity results ofnontrivial solutions to nonhomogeneous singularelliptic systems with critical C-K-N exponent（λ1,λ2）.With the help of the Nehari manifold and under sufficient conditions on the parameters λ1 and λ2, we prove some existence results.
文摘[ Objective] The aim was to find optimum reaction conditions for synthetic process of Vitamin C. [ Method] Vitamin C sodium was used as raw material to prepare vitamin C through acidification, separation, desalination, recovery and purification. The impact of reaction time, tempera-ture, feedstock molar ratio and water content on the yield of vitamin C were investigated in the experiment. [Result] The optimum reaction condi- tions for synthetic process of Vitamin C were as follows： in the acidification test, reaction time 120 min, temperature 20 -30 ℃, the molar ratio be-tween hydrochloric acid and Vitamin C sodium 1 ： 1 and water content 41.0%. Under the above condition, the purity and yield of vitamin C reach 99.80% and 94.74% respectively. [Conclusion] The process can decrease consumption, enhance quality and recover of the product, improve the environmental pollution, shorten processing periods and reduce production cost. Thus, the process is suitable for industrialization. Key words Vitamin C; Vitamin C sodium; Acidification; China
基金the National Natural Science Foundation of China under Grant No.10671170the Doctorial Foundation of Yanshan University under Grant No.B228.
文摘The authors present a new queueing model with （e, d） setup time. Using the quasi-birth-and-death process and matrix-geometric method, the authors obtain the stationary distribution of queue length and the LST of waiting time of a customer in the system. Furthermore, the conditional stochastic decomposition results of queue length and waiting time are given.
基金supported by the New Century Excellent Talents in University and the National Natural Science Foundation of China (Grant Nos.50572032,50731006 and 50801030)
文摘In this paper, we investigate diamond crystallization in Fe-Ni-C with an aluminum additive and the capability of aluminum for converting graphite to diamond in a series of experiments at 4.9-5.5 GPa and 1240-1500℃. Our experimental results show that the growth habits of diamond crystal have been significantly influenced by the addition of aluminum as a catalyst. The crystal color changes from yellow to nearly colorless. The morphology of the synthesized diamond crystals gradually changes from cubic-octahedron to octahedron in the Fe-Ni-C systems with increasing aluminum additive. The lowest synthesis conditions fell first and then rose with increasing aluminum. We found a suitable addition of aluminum is very effective in lowering the synthesis conditions while an excessive aluminum additive may have a suppressive effect on the diamond nucleation.
