期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
Hot Isostatic Pressing and Characterizations of Eu^(3+)-doped(Gd,Lu)_(2)O_(3) Transparent
1
作者 LIU Qiang HE Ningtong +7 位作者 WANG Yanbin HUANG Dong CHEN Yuyang LI Tingsong ZHOU Zhenzhen HU Chen IVANOV Maxim LI Jiang 《发光学报》 EI CAS CSCD 北大核心 2024年第12期1975-1983,共9页
(Gd,Lu)_(2)O_(3)∶Eu scintillation ceramics have promising applications in the high-energy X-ray imaging.Eu0.1Gd0.6Lu1.3O3 nano-powders with pure phase were prepared from the precursor calcined at 1050℃for 4 h by the... (Gd,Lu)_(2)O_(3)∶Eu scintillation ceramics have promising applications in the high-energy X-ray imaging.Eu0.1Gd0.6Lu1.3O3 nano-powders with pure phase were prepared from the precursor calcined at 1050℃for 4 h by the co-precipitation method.Using the synthesized nano-powders as initial material,Eu_(0.1)Gd_(0.6)Lu_(1.3)O_(3)ceramics were fabri-cated by vacuum pre-sintering at different temperatures for 2 h and hot isostatic pressing(HIP)at 1750℃for 3 h in ar-gon.The influence of pre-sintering temperature on the microstructure,optical and luminescence properties was investi-gated.The Eu_(0.1)Gd_(0.6)Lu_(1.3)O_(3)ceramics pre-sintered at 1625℃for 2 h combined with HIP post-treatment show the high-est in-line transmittance of 75.2%at 611 nm.The photoluminescence(PL)and X-ray excited luminescence(XEL)spectra of the Eu_(0.1)Gd_(0.6)Lu_(1.3)O_(3)transparent ceramics demonstrate a strong red emission peak at 611 nm due to the^(5)D_(0)→^(7)F_(2) transition of Eu^(3+).The PL,PLE and XEL intensities of the HIP post-treated Eu_(0.1)Gd_(0.6)Lu_(1.3)O_(3)ceramics show a trend of first ascending and then descending with the increase of pre-sintering temperature.The thermally stimulated lumines-cence(TSL)curve of the HIP post-treated Eu_(0.1)Gd_(0.6)Lu_(1.3)O_(3)ceramics presents one high peak at 178 K and two peaks with lower intensities at 253 K and 320 K.The peak at 320 K may be related to oxygen vacancies,and the lumines-cence peak at 178 K is related to defects caused by the valence state changes of Eu^(3+)ions. 展开更多
关键词 (gd lu)_(2)o_(3)∶eu transparent ceramics microstructure optical properties hot isostatic pressing
下载PDF
Lu-Eu共掺杂Ga_(2)O_(3)的光电性质的第一性原理计算 被引量:1
2
作者 邹梦真 肖清泉 +4 位作者 姚云美 付莎莎 叶建峰 唐华著 谢泉 《原子与分子物理学报》 北大核心 2024年第3期144-151,共8页
宽禁带半导体β-Ga_(2)O_(3)因为具有优良的物理化学性能而成为研究热点.本文基于DFT(Density Functional Theory)的第一性原理方法,先采用PBE(Perdew-Burke-Ernzerhof)中的GGA(Generalized Gradient Approximation)和GGA+U(Generalized... 宽禁带半导体β-Ga_(2)O_(3)因为具有优良的物理化学性能而成为研究热点.本文基于DFT(Density Functional Theory)的第一性原理方法,先采用PBE(Perdew-Burke-Ernzerhof)中的GGA(Generalized Gradient Approximation)和GGA+U(Generalized Gradient Approximation-Hubbard U)的方法计算了本征β-Ga_(2)O_(3),Lu掺杂浓度为12.5%的β-Ga_(2)O_(3)及Lu-Eu共掺杂浓度为25%的β-Ga_(2)O_(3)结构的晶格常数、能带结构和体系总能量.发现采用GGA+U的方法计算的带隙值更接近实验值,于是采用GGA+U的方法计算了本征β-Ga_(2)O_(3),Lu掺杂的β-Ga_(2)O_(3)以及Lu-Eu共掺杂的β-Ga_(2)O_(3)结构的能态总密度、介电函数、吸收谱以及反射率等.由计算结果得知β-Ga_(2)O_(3)的带隙为4.24 eV,Lu掺杂浓度为12.5%的β-Ga_(2)O_(3)的带隙为2.23 eV,Lu-Eu共掺杂浓度为25%的β-Ga_(2)O_(3)的带隙为0.9 eV,均为直接带隙半导体,掺杂并未改变β-Ga_(2)O_(3)的带隙方式.光学性质计算结果表明在低能区掺杂浓度为12.5%的Lu和Lu-Eu共掺杂浓度为25%的β-Ga_(2)O_(3)的吸收系数和反射率均强于本征β-Ga_(2)O_(3),Lu-Eu掺杂β-Ga_(2)O_(3)的吸收系数和反射率又略强于Lu掺杂β-Ga_(2)O_(3),表明Lu-Eu掺杂β-Ga_(2)O_(3)的材料有望应用于制备红外光电子器件. 展开更多
关键词 lu-eu共掺β-Ga_(2)o_(3)
下载PDF
Lu_2O_3:Eu与(Lu,Gd)_2O_3:Eu透明闪烁陶瓷的性能对比研究 被引量:1
3
作者 解伟峰 王静 《广州化工》 CAS 2017年第20期53-55,共3页
高密度的Lu_2O_3:Eu陶瓷在X射线激发下可以观察出极强的红光发射,显示了该陶瓷在X射线探测成像领域有着巨大的应用前景;通过Gd共掺得到(Lu,Gd)_2O_3:Eu透明陶瓷可以改善Lu_2O_3:Eu透明闪烁陶瓷光谱性能,该文对两种陶瓷的多种性能进行对... 高密度的Lu_2O_3:Eu陶瓷在X射线激发下可以观察出极强的红光发射,显示了该陶瓷在X射线探测成像领域有着巨大的应用前景;通过Gd共掺得到(Lu,Gd)_2O_3:Eu透明陶瓷可以改善Lu_2O_3:Eu透明闪烁陶瓷光谱性能,该文对两种陶瓷的多种性能进行对比,同时介绍了已经商用的(Y,Gd)_2O_3:Eu,Pr、GOS、GGG陶瓷的闪烁性能;阐述了单一组分的闪烁陶瓷性能单一,不能满足应用条件,多组分的闪烁陶瓷将会成为研究的热点。 展开更多
关键词 lu2o3:eu (lu gd)2o3:eu X线
下载PDF
纳米晶(Gd,Lu)_2O_3:Eu粉体的合成及发光性能(英文)
4
作者 吴云涛 秦来顺 +2 位作者 史宏声 柴文祥 舒康颖 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2010年第S2期118-121,共4页
通过燃烧法制备得到(Gd,Lu)203:Eu纳米粉体。利用傅里叶红外光谱仪,x射线衍射仪,高分辨透射电镜,激发和发射光谱来表征样品的结构和发光性质。结果表明,将燃烧法制备得到的粉体在800℃煅烧1h后,(Gd,Lu)203:Eu纳米粉体结晶为立方结构。... 通过燃烧法制备得到(Gd,Lu)203:Eu纳米粉体。利用傅里叶红外光谱仪,x射线衍射仪,高分辨透射电镜,激发和发射光谱来表征样品的结构和发光性质。结果表明,将燃烧法制备得到的粉体在800℃煅烧1h后,(Gd,Lu)203:Eu纳米粉体结晶为立方结构。通过增加硝酸盐(N)和甘氨酸(G)的摩尔比,经过煅烧的粉体颗粒的尺寸从15 nm增加到50nm,后又减小到40nm。而且发射光谱和激发光谱的性质比较依赖样品的颗粒尺寸。同时也发现,在此条件下制备得到的粉体非常适合制备(Gd,Lu)203:Eu的透明陶瓷。 展开更多
关键词 (gd lu)2o3:eu
原文传递
(Y,Gd)_2O_3:Eu^(3+)纳米粒子制备过程中的合成动力学 被引量:1
5
作者 朱红艳 马伟民 +3 位作者 闻雷 管仁国 马雷 吴南 《金属学报》 SCIE EI CAS CSCD 北大核心 2012年第6期671-677,共7页
采用反向滴定共沉淀法制备出(Y,Gd)_2O_3:Eu^(3+)前躯体,再在不同温度下煅烧,获得(Y,Gd)_2O_3:Eu^(3+)纳米粒子,用XRD和SEM对样品物相组成及形貌进行了表征;用TG-DTA获得了佯品在不同升温速率下的热分解曲线.结果表明,前躯体在煅烧过程... 采用反向滴定共沉淀法制备出(Y,Gd)_2O_3:Eu^(3+)前躯体,再在不同温度下煅烧,获得(Y,Gd)_2O_3:Eu^(3+)纳米粒子,用XRD和SEM对样品物相组成及形貌进行了表征;用TG-DTA获得了佯品在不同升温速率下的热分解曲线.结果表明,前躯体在煅烧过程中的物相变化分为3个阶段,用Doyle-Ozawa法和Kissinger法分别计算出各个反应阶段的表观活化能,其平均值分别为191.54,557.05和236.58 kJ·mol^(-1)并建立了动力学方程;(Y,Gd)_2O_3:Eu^(3+)晶粒生长活化能是35.58 kJ.mol^(-1),纳米粒子形核过程中的晶粒长大由晶界扩散控制. 展开更多
关键词 (Y gd)_2o_3:eu^(3%PluS%)纳米粒子
原文传递
Effects of two strategies on afterglow behavior of Lu_(2)O_(3):Eu single crystal scintillator:Co-doping with Pr^(3+)and solid solution with Sc_(2)O_(3) 被引量:1
6
作者 Zhongjun Xue Dongzhou Ding +4 位作者 Yating Sima Zuyao Zhou Hanrui Dong Shuwen Zhao He Feng 《Journal of Rare Earths》 SCIE EI CAS CSCD 2023年第5期658-665,I0001,共9页
In this paper,effect of two strategies on afterglow behavior of Lu_(2)O_(3):Eu single crystal scintillato r,Pr^(3+)codoping and solid solution with Sc_(2)O_(3),were studied systematically.Two groups of Lu_(2)O_(3):5 a... In this paper,effect of two strategies on afterglow behavior of Lu_(2)O_(3):Eu single crystal scintillato r,Pr^(3+)codoping and solid solution with Sc_(2)O_(3),were studied systematically.Two groups of Lu_(2)O_(3):5 at%Eu,x at%Pr(x=0,0.2,0.5,1,2 and 5)and(Lu1-yScy)_(2)O_(3):5 at%Eu(y=0,20 at%,50 at%and 70 at%)single crystals were grown by floating zone(FZ)method in air atmosphere.The structures of as-grown crystals were determined by X-ray diffraction(XRD).The scintillation,photoluminescence properties and carrier trap states were investigated through afterglow,X-ray excitation luminescence(XEL),transmittance,photoluminescence excitation(PLE)and photoluminescence(PL),PL decay and thermal stimulated luminescence(TSL)curves.It is found that with the increase of Pr^(3+)concentration,the afterglow level of the system decreases at the expense of scintillation luminescence efficiency.Meanwhile,although Sc_(2)O_(3):Eu presents much lower afterglow intensity than Lu_(2)O_(3):Eu,the addition of Sc_(2)O_(3)will just increase the afterglow level of the(Lu1-yScy)_(2)O_(3):5 at%Eu single crystal system.Possible mechanisms for above phenomena are discussed based on experimental results. 展开更多
关键词 lu_(2)o_(3):eu Afterglow behavior Pr3%PluS%co-doping (lu1-yScy)_(2)o_(3)solid solution Rare earths
原文传递
Biphasic (Lu,Gd)_(3)Al_(5)O_(12)-based transparent nanoceramic color converters for high-power white LED/LD lighting 被引量:1
7
作者 Jie Fu Ying Zhang +10 位作者 Shaowei Feng Mathieu Allix Cécile Genevois Emmanuel Veron Zhibiao Ma Wenlong Xu Linghan Bai Ruyu Fan Yafeng Yang Hui Wang Jianqiang Li 《Journal of Advanced Ceramics》 SCIE EI CAS CSCD 2023年第12期2331-2344,共14页
Ce doped Lu_(3)Al_(5)O_(12)(Ce:LuAG)transparent ceramics are considered as promising color converters for solid-state lighting because of their excellent luminous efficiency,high thermal quenching temperature,and good... Ce doped Lu_(3)Al_(5)O_(12)(Ce:LuAG)transparent ceramics are considered as promising color converters for solid-state lighting because of their excellent luminous efficiency,high thermal quenching temperature,and good thermal stability.However,Ce:LuAG ceramics mainly emit green light.The shortage of red light as well as the expensive price of Lu compounds are hindering their application for white lighting.In this work,transparent(Lu,Gd)_(3)Al_(5)O_(12)–Al_(2)O_(3)(LuGAG–Al_(2)O_(3))nanoceramics with different replacing contents of Gd^(3+)(10%–50%)were successfully elaborated via a glass-crystallization method.The obtained ceramics with full nanoscale grains are composed of the main LuGAG crystalline phase and secondary Al_(2)O_(3) phase,exhibiting eminent transparency of 81.0%@780 nm.After doping by Ce^(3+),the Ce:LuGAG–Al_(2)O_(3) nanoceramics show a significant red shift(510 nm→550 nm)and make up for the deficiency of red light component in the emission spectrum.The Ce:LuAG–Al_(2)O_(3) nanoceramics with 20%Gd^(3+)show high internal quantum efficiency(81.5%in internal quantum efficiency(IQE),96.7%of Ce:LuAG–Al_(2)O_(3) nanoceramics)and good thermal stability(only 9%loss in IQE at 150℃).When combined with blue LED chips(10 W),0.3%Ce:LuGAG–Al_(2)O_(3) nanoceramics with 20%Gd^(3+)successfully realize the high-quality warm white LED lighting with a color coordinate of(0.3566,0.435),a color temperature of 4347 K,CRI of 67.7,and a luminous efficiency of 175.8 lm·W^(−1).When the transparent 0.3%Ce:LuGAG–Al_(2)O_(3) nanoceramics are excited by blue laser(5 W·mm^(−2)),the emission peak position redshifts from 517 to 570 nm,the emitted light exhibits a continuous change from green light to yellow light,and then to orange-yellow light,and the maximum luminous efficiency is up to 234.49 lm·W^(−1)(20%Gd^(3+)).Taking into account the high quantum efficiency,good thermal stability,and excellent and adjustable luminous properties,the transparent Ce:LuGAG–Al_(2)O_(3) nanoceramics with different Gd^(3+)substitution contents in this paper are believed to be promising candidates for high-power white LED/LD lighting. 展开更多
关键词 glass crystallization (lu gd)_(3)Al_(5)o_(12)(luGAG)-Al_(2)o_(3)nanoceramics high-power WLEDs/LDs white lighting
原文传递
Power-scalable sub-100-fs Tm laser at 2.08μm 被引量:1
8
作者 Li Wang Weidong Chen +13 位作者 Yongguang Zhao Hanlin Yang Wei Jing Zhongben Pan Hui Huang Jiachen Liu Ji Eun Bae Fabian Rotermund Pavel Loiko Xavier Mateos Zhengping Wang Xinguang Xu Uwe Griebner Valentin Petrov 《High Power Laser Science and Engineering》 SCIE CAS CSCD 2021年第4期41-45,共5页
We report on a power-scalable sub-100-fs laser in the 2-μm spectral range using a Tm;-doped‘mixed’(Lu,Sc);O;sesquioxide ceramic as an active medium.Pulses as short as 58 fs at 2076 nm with an average output power o... We report on a power-scalable sub-100-fs laser in the 2-μm spectral range using a Tm;-doped‘mixed’(Lu,Sc);O;sesquioxide ceramic as an active medium.Pulses as short as 58 fs at 2076 nm with an average output power of 114 mW at a pulse repetition rate of approximately 82.9 MHz are generated by employing single-walled carbon nanotubes as a saturable absorber.A higher average power of 350 m W at 2075 nm is obtained at the expense of the pulse duration(65 fs).A maximum average power of 486 mW is achieved for a pulse duration of 98 fs and an optical conversion efficiency of 22.3%,representing the highest value ever reported from sub-100-fs mode-locked Tm lasers. 展开更多
关键词 2-μm mode-locked laser single-walled carbon nanotubes Tm:(lu Sc)_(2)o_(3)
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部