The fullerene complex, η 2 C 60 [Ru(NO)(PPh 3)] 2, has been prepared by the reaction of C 60 with Ru(NO) 2(PPh 3) 2 under a nitrogen atmosphere and refluxing. The new complex was characterized by means of elemental a...The fullerene complex, η 2 C 60 [Ru(NO)(PPh 3)] 2, has been prepared by the reaction of C 60 with Ru(NO) 2(PPh 3) 2 under a nitrogen atmosphere and refluxing. The new complex was characterized by means of elemental analysis, IR, XPS, electronic spectra and 31 P NMR. The results show that the complex of η 2 form can be formed by C 60 bonding to Ru(NO) 2(PPh 3) 2 in the σ π way and there is hyperconjugation effect in the molecule. So electrons will flow easier and photoelectric effect for this new compound is expected. In addition, the structure of the complex has been supposed. The ruthenium is 4 coordinate in the complex, bonding to two carbon atoms, to one PPh 3 and to one NO.展开更多
The fullerene complex,C60 RuH2(CO)(PPh3),has been prepared and characterize d by elemental analyses,IR and electronic spectra.In addition,the redox property of t he complex has been studied by cyclic voltammetry.The r...The fullerene complex,C60 RuH2(CO)(PPh3),has been prepared and characterize d by elemental analyses,IR and electronic spectra.In addition,the redox property of t he complex has been studied by cyclic voltammetry.The results s how that the reduction potential of C60 RuH2(CO)(PPh3)is more negative than that of C60.Meanwhile,with the extent of the complex reduction get to increace the stability of the complex ion is on the decrease.展开更多
Using plasma build-up welding technology, Ni60, WC, Cr3C2, and TiC composite powders were clad on the surface of the substrate in a certain proportion according to the metallurgical bonding method to increase the bond...Using plasma build-up welding technology, Ni60, WC, Cr3C2, and TiC composite powders were clad on the surface of the substrate in a certain proportion according to the metallurgical bonding method to increase the bond strength between the coating and the substrate. Scanning electron microscopy and energy dispersive spectroscopy were used to observe the microstructure of the surfacing layer and the chemical composition of the sample. The hardness and wear resistance of the surfacing layer were tested and analyzed by the HV-1000 hardness tester and the impact wear device. The results showed that in the microstructure, fishbone, spider-web, and floral-like structures appeared in the surfacing layer. When the micro-hardness was tested, the depth of the indentation reflected the hardness of the surfacing layer. When analyzing wear resistance, the amount of wear increases with time.展开更多
In order to prepare heatresistant inner layer of hot-forging die, plasma spraying, plasma re- melting and plasma spray welding were adopted. Cr3C2 coatings of Ni-Based were prepared respectively with 10%, 20% and 30% ...In order to prepare heatresistant inner layer of hot-forging die, plasma spraying, plasma re- melting and plasma spray welding were adopted. Cr3C2 coatings of Ni-Based were prepared respectively with 10%, 20% and 30% Cr3C2 powder and W6Mo5Cr4V2 substrate. The coating microstructure analysis, the micro-hardness test, and the measurement of thermal parameters of coating were conducted. The experimental results show that the coating has the better thermo-physical property by using plasma spray welding method with the powder ratio of 90% Ni60 and 10% Cr3C2, and by this way the micro-hardness of coating can achieve 1100 HV.展开更多
文摘The fullerene complex, η 2 C 60 [Ru(NO)(PPh 3)] 2, has been prepared by the reaction of C 60 with Ru(NO) 2(PPh 3) 2 under a nitrogen atmosphere and refluxing. The new complex was characterized by means of elemental analysis, IR, XPS, electronic spectra and 31 P NMR. The results show that the complex of η 2 form can be formed by C 60 bonding to Ru(NO) 2(PPh 3) 2 in the σ π way and there is hyperconjugation effect in the molecule. So electrons will flow easier and photoelectric effect for this new compound is expected. In addition, the structure of the complex has been supposed. The ruthenium is 4 coordinate in the complex, bonding to two carbon atoms, to one PPh 3 and to one NO.
文摘The fullerene complex,C60 RuH2(CO)(PPh3),has been prepared and characterize d by elemental analyses,IR and electronic spectra.In addition,the redox property of t he complex has been studied by cyclic voltammetry.The results s how that the reduction potential of C60 RuH2(CO)(PPh3)is more negative than that of C60.Meanwhile,with the extent of the complex reduction get to increace the stability of the complex ion is on the decrease.
基金Funded by the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents(No.2014RCJJ041)the National Natural Science Foundation of China(51774199)
文摘Using plasma build-up welding technology, Ni60, WC, Cr3C2, and TiC composite powders were clad on the surface of the substrate in a certain proportion according to the metallurgical bonding method to increase the bond strength between the coating and the substrate. Scanning electron microscopy and energy dispersive spectroscopy were used to observe the microstructure of the surfacing layer and the chemical composition of the sample. The hardness and wear resistance of the surfacing layer were tested and analyzed by the HV-1000 hardness tester and the impact wear device. The results showed that in the microstructure, fishbone, spider-web, and floral-like structures appeared in the surfacing layer. When the micro-hardness was tested, the depth of the indentation reflected the hardness of the surfacing layer. When analyzing wear resistance, the amount of wear increases with time.
文摘In order to prepare heatresistant inner layer of hot-forging die, plasma spraying, plasma re- melting and plasma spray welding were adopted. Cr3C2 coatings of Ni-Based were prepared respectively with 10%, 20% and 30% Cr3C2 powder and W6Mo5Cr4V2 substrate. The coating microstructure analysis, the micro-hardness test, and the measurement of thermal parameters of coating were conducted. The experimental results show that the coating has the better thermo-physical property by using plasma spray welding method with the powder ratio of 90% Ni60 and 10% Cr3C2, and by this way the micro-hardness of coating can achieve 1100 HV.
