Unified Control Theory from PID to ACPID

To address the challenge of achieving unified control across diverse nonlinear systems, a comprehensive control theory spanning from PID (Proportional-Integral-Derivative) to ACPID (Auto-Coupling PID) has been proposed. The primary concept is to unify all intricate factors, including internal dynamics and external bounded disturbance, into a single total disturbance. This enables the mapping of various nonlinear systems onto a linear disturbance system. Based on the theory of PID control and the characteristic equation of a critically damping system, Zeng’s stabilization rules (ZSR) and an ACPID control force based on a single speed factor have been designed. ACPID control theory is both simple and practical, with significant scientific significance and application value in the field of control engineering.

Deterministic Learning-Based Neural PID Control for Nonlinear Robotic Systems

Traditional proportional-integral-derivative(PID)controllers have achieved widespread success in industrial applications.However,the nonlinearity and uncertainty of practical systems cannot be ignored,even though most of the existing research on PID controllers is focused on linear systems.Therefore,developing a PID controller with learning ability is of great significance for complex nonlinear systems.This article proposes a deterministic learning-based advanced PID controller for robot manipulator systems with uncertainties.The introduction of neural networks(NNs)overcomes the upper limit of the traditional PID feedback mechanism’s capability.The proposed control scheme not only guarantees system stability and tracking error convergence but also provides a simple way to choose the three parameters of PID by setting the proportional coefficients.Under the partial persistent excitation(PE)condition,the closed-loop system unknown dynamics of robot manipulator systems are accurately approximated by NNs.Based on the acquired knowledge from the stable control process,a learning PID controller is developed to further improve overall control performance,while overcoming the problem of repeated online weight updates.Simulation studies and physical experiments demonstrate the validity and practicality of the proposed strategy discussed in this article.

Practice of Infection Prevention and Control Strategies in Risk Departments during the COVID-19 Epidemic

Objective: To explore the practice and application of infection prevention and control strategies in risk departments during the COVID-19 epidemic, and to formulate the infection prevention and control measures to provide advice and guidance in risk departments. Methods: According to the latest plan of diagnosis and treatment, prevention and control issued by the National Health Commission, expert advice and consensus, combined with the actual situation in our hospital, a series of infection prevention and control measures of COVID-19 in risk department was formulated. Results: During the epidemic period, the prevention and control measures of nine risk departments including emergency operation, anesthesiology, endoscopy center, blood purification center, otolaryngology, stomatology, medical imaging department, medical cosmetology department and pulmonary function room were established from six aspects, including pre-examination and screening, medical technology control, personnel management, personal protection, environmental disinfection, medical waste disposal, etc. Conclusion: During the epidemic period, the infection prevention and control strategy of risk departments is one of the key links to control the spread of the epidemic, and risk departments must pay attention to and strictly implement various infection prevention and control measures.

Epidemiology and control of monkeypox outbreak in Houston,Texas

Background:In the 2022-2023 global outbreak,the United States and state of Texas recorded a total of 31,277 and 3,085 confirmed monkeypox(Mpox)cases respectively as of November 2023.This study aims to investigate the demographic characteristics and risk factors of Mpox outbreak in Houston and document the epidemiologic control measures implemented with their outcomes.Methods:Houston Health Department received reports of suspected Mpox cases via electronic case reports and laboratory reports from healthcare providers within Houston.These were then investigated and reclassified as either positive or negative using DNA polymerase chain reaction tests.All the reported cases received between May 2022 and January 2023 were included in this study using convenient sampling methods.Descriptive statistics using frequency distribution was used to analyze the sociodemographic,clinical features and travel history of the cases.A two-sided Chi-squared test was used to determine association between Mpox test results and risk factors with significant level set at P<0.05.Other infection control measures such as community engagement,health education,tracking and contact tracing,vaccination,referrals and laboratory sample logistics support were implemented by the health department.Results:Out of the total of 1,625 suspected persons investigated for Mpox,724(44.6%)tested positive.Among the 724 confirmed cases,male was 700(96.7%),females 20(2.8%),transgender male 1(0.1%),transgender female 3(0.4%).Age groups 30-39 years constituted 43.6%,18-29 years 27.4%,40-49 years 18.2%,50-59 years was 8%.Race distribution of positive cases was Whites 43.4%,African American 38.7%,Asian 1.4%.Risk factors with P<0.05 included male gender,age groups 30-39 years and 40-49 years,travel history to Mpox endemic areas,recent sexual contact with known or suspected Mpox cases,human immunodeficiency virus seropositivity.Identifying as gay and bisexual were also statistically significant risk factors for Mpox infection.Conclusion:The timely implementation of primary and secondary prevention measures targeted at the most at-risk populations was very effective at curtailing the spread of Mpox infection within the city of Houston.

Prevention and Control Strategies of Nosocomial Infection and Effectiveness Evaluation in a Tertiary Teaching Hospital during the Epidemic of COVID-19

Objective: To evaluate the role of prevention and control strategies for nosocomial infection in a tertiary teaching hospital during the sudden outbreak of Corona Virus Disease 2019 (COVID-19). Methods: The hospital initiated an emergency plan involving multi-departmental defense and control. It adopted a series of nosocomial infection prevention and control measures, including strengthening pre-examination and triage, optimizing the consultation process, improving the hospital’s architectural composition, implementing graded risk management, enhancing personal protection, and implementing staff training and supervision. Descriptive research was used to evaluate the short-term effects of these in-hospital prevention and control strategies. The analysis compared changes in related evaluation indicators between January 24, 2020 and February 12, 2020 (Chinese Lunar New Year’s Eve 2020 to lunar January 19) and the corresponding lunar period of the previous year. Results: Compared to the same period last year, the outpatient fever rate increased by 1.85-fold (P P Conclusion: The nosocomial infection prevention and control strategies implemented during this specific period improved the detection and control abilities for the COVID-19 source of infection and enhanced the compliance with measures. This likely contributed significantly to avoiding the occurrence of nosocomial infection.

Research on the Control Cover against Solenopsis invicta and Rapid Extinguishment of Its Epidemic

Based on the biological characteristics of Solenopsis invicta and the structural characteristics of its ant nest,a fast and efficient closed treatment device was developed.Compared with the simple chemical treatment commonly used at present,the developed treatment device(the ant nest control cover)is a fast and efficient method to exterminate S.invicta in 7 d,featured by short course,quick results and good effect.

采摘机器人机械手避障方法研究——基于遗传优化和模糊PID控制器

为了提高采摘机器人机械手移动的自动化程度,使其在移动过程中有效避开障碍物,将基于PID控制器的避障系统引入到了机械手的设计上,并采用遗传算法和模糊算法对控制器进行了优化,提高了机械手移动的准确性和平稳性。模拟采摘机器人机械手的作业环境,对机械手的避障功能进行了测试,结果表明:机械手可以成功躲避障碍物,且采用遗传和模糊算法优化的机械手具有更高的移动平稳性,对于提高果实采摘效率和质量具有重要的作用。

基于遗传算法的汽车主动悬架变论域模糊PID控制

针对1/4车主动悬架系统,提出一种基于遗传算法(genetic algorithm,GA)的变论域模糊比例-积分-微分(proportional-integral-differential,PID)控制方法.在建立主动悬架系统模型的基础上,引入变论域思想设计模糊PID控制器.为进一步改善控制器减振效果,采用GA来优化变论域中伸缩因子描述函数的参数.结果表明:相比PID、模糊PID与未优化的变论域模糊PID等控制方法,基于GA的变论域模糊PID控制方法在降低车身垂向加速度、改善乘坐舒适性方面具有优越性;所提控制方法对簧载质量和车辆行驶速度不确定性具备较强的鲁棒性.

基于PID的ROV运动控制仿真

针对观察型水下机器人在水下运动时易受暗流、波浪影响,造成操控困难、系统稳定性差等问题,建立遥控水下机器人(Remotely Operated Vehicle,ROV)不同运动的控制模型,考虑电机和导管螺旋桨推进器的传递函数对ROV控制系统的影响,确定定艏向和定深控制系统的闭环传递函数,结合模糊控制和比例积分微分(Proportional Integral Differential,PID)控制法,得到模糊PID控制器,基于MATLAB/Simulink环境进行ROV定深度运动仿真和ROV水平面艏向定偏角运动仿真。结果表明,与传统PID控制相比,模糊PID控制具有更优的ROV定艏向和定深度控制效果,不会发生超调现象,在抗干扰能力和响应速度方面具有明显的优势,可有效地实现ROV定艏向和定深度运动控制。

基于单片机和PID算法的温度智能控制系统设计

为提高温度控制的智能化水平,设计一种智能温度控制系统。该系统以STC89C52单片机为控制器,采用PID算法控制温度,具有语音播报和手机远程控制等功能。采用DS18B20温度传感器采集环境温度;设计LCD12864显示电路实时显示当前温度、温度上下限以及温度状态;设计WT588D语音提醒电路,当测量温度小于下限或大于上限时发出语音提醒;设计按键电路实现温度上下限值的设定;设计蓝牙通信电路,与手机APP通信,实现远程控制;采用PID算法输出控制量,控制固态继电器驱动加热或降温装置,实现温度控制。其次,对温度控制系统的硬件和软件进行设计,并制作实物进行运行测试。实验结果表明,所设计的温度控制系统能够很好地实现温度控制,从而达到预期效果,且操作方便、成本低,具有较强的应用价值。

“自动控制原理”课程思政教学探讨——以PID控制教学为例

随着信息技术的飞速发展及在各行各业的深入渗透,高校教学过程中越来越多的专业开设了控制类课程。“自动控制原理”是自动化类专业的核心基础课程,也是武汉大学全校公共专业基础平台课,受众面十分广泛。通过主要阐述经典控制理论PID控制器中体现的系统思想,通过剖析PID控制的物理内涵,润物无声地融入思政元素,将控制理论内在的技术哲学自然融入专业课程教学,在传授知识的同时进行价值引领,切实提升立德树人成效。

基于变论域模糊PID的金属热处理过程温度控制方法

为高效且安全地提取金属合金内的可用材质并分析其性能,利用变论域模糊PID技术,实现对热处理过程的温度控制。设定在金属规则状态不变的情况下,论域会随着偏差的缩减出现伸缩,即需要增添新的规则。若偏差率能够支持模糊量化取整,控制器的伸缩因子可能会陷入无法取值的情况。此时,通过二元函数分片双一次插值法计算伸缩因子,在临近分档之间填充新规则,确保伸缩因子取值的连续性。然后,在模糊PID控制过程中加入变论域,依靠控制器实现对金属热处理过程温度的控制。根据实验验证情况可知:该方法有效提高了控制效果,在应用该方法后,缩短了温度控制时间,在100s内就可以是加热温度到达拟定值。

基于粒子群优化模糊PID控制的水厂加氯系统

水厂加氯过程具有非线性、大时滞等特点,采用传统的PID控制方式难以实现消毒剂精准投加。因此,以某采用次氯酸钠消毒系统的水厂为例,首先通过分析该水厂加氯系统工作原理,结合工程经验和运行数据确定了加氯过程的近似数学模型。然后综合使用粒子群优化算法、模糊控制算法和PID控制算法,设计了一种粒子群优化模糊PID控制器,并利用MATLAB软件搭建了粒子群优化模糊PID控制系统和传统PID控制系统的模型进行仿真验证,结果表明:相较于传统PID控制系统,粒子群优化模糊PID控制系统的超调量减少了89.36%,调节时间减少了46.63%,其抗干扰能力也更强,系统整体控制效果有了较大提升。最后使用基于粒子群优化的模糊PID控制法对水厂加氯控制系统进行改造,试运行后发现,新系统控制效果良好,出厂水游离氯值能够稳定在设定值附近。

基于BPNN-PID控制策略的果蔬保鲜环境参数调控优化

【目的】开发新的控制策略,用于解决传统控制方法果蔬保鲜环境参数因时变性、非线性、滞后性强和惯性大等特点导致的控制精度低、鲁棒性弱等问题。【方法】将传统比例−积分−微分(Proportional-integral-derivative,PID)和BP神经网络(Back-propagation neural network,BPNN)算法相结合,开发一种基于BPNN-PID的控制策略,通过自主搭建的果蔬保鲜环境调控试验平台和自主设计的控制系统,研究不同控制策略对保鲜环境参数调控效果的影响。【结果】基于BPNN-PID控制策略的果蔬保鲜环境控制系统,环境温度超调量为1.7℃、稳定时间为80 min、稳态误差为±0.2℃,环境相对湿度超调量为2.8%、稳定时间为55 min,相对湿度稳定维持在80%~90%范围内。与传统PID控制策略相比,BPNN-PID控制策略环境温度超调量减小了2.1℃、稳态误差减小了0.3℃、稳定时间缩短了25 min,环境相对湿度超调量减小了2.2%、稳定时间缩短了25 min,环境参数波动幅度均有所降低。【结论】本文开发的果蔬保鲜环境控制系统呈现出良好的动态调整能力,具有较强的鲁棒性,控制性能明显提升,实现了保鲜环境参数的精准控制,满足果蔬保鲜贮藏要求。研究结果为果蔬保鲜环境参数调控提供了参考。

基于模糊-遗传算法的粗纱机出料传动系统PID参数优化方法

目前常规的粗纱机出料传动系统PID参数优化方法主要通过结合被控对象的稳态增益情况构建出优化函数,实现PID参数优化整合,忽略了实际运行工况下的干扰成分,导致参数优化效果不佳。对此,提出基于模糊-遗传算法的粗纱机出料传动系统PID参数优化方法。首先结合PID的系统阶跃响应曲线,以被控量的偏差变化率作为主要参数选取性能指标;然后通过引入负荷扰动模块以及频率干扰模块,对PID调节模块进行建模分析;最后结合模糊-遗传算法对最优适应度值进行求解,从而实现PID参数的有效优化,并对提出的方法进行优化效果检验。最终测试结果表明,采用提出的方法对PID参数进行优化整合时,控制输出曲线与理论输出曲线的拟合程度更高,具备较为理想的优化效果。

重放攻击下多智能体系统H_(∞)一致性PID控制

本文针对一类带有加性噪声和乘性噪声的离散多智能体系统,研究重放攻击下多智能体系统的H_(∞)一致性比例-积分-微分(PID)控制问题.首先,根据智能体的测量输出设计状态观测器,对智能体的状态进行有效估计,观测器设计过程中考虑了系统测量输出从传感器传输到观测器过程中受到重放网络攻击的影响.然后,利用智能体与其邻居智能体的估计状态差设计PID控制器.利用李雅普诺夫稳定性理论和代数图论,证明在该控制策略下,多智能体系统在重放攻击存在的情况下达到预期的H_(∞)性能指标.最后,利用线性矩阵不等式(LMI)方法求解观测器和控制器增益,利用数值仿真验证了所设计的观测器和PID控制器的有效性.

带宽化调节下的抗扰PID退饱和控制方法

比例–积分–微分(PID)控制的抗饱和设计是一类经典非线性控制问题,理论研究丰富,但工程中广泛使用的仍是积分退饱和这类简易策略.究其原因,现有理论方法过于依赖系统模型和状态空间理论,稳定性条件与调参机制之间关系复杂.本文基于经典退饱和控制结构,首次阐述了“退饱和带宽”概念及退饱和参数调节机理,在此基础上讨论了两类低阶退饱和补偿器的带宽化设计方法.在抗扰PID反馈控制下,结合小增益定理得到退饱和控制的稳定性条件,给出控制参数与退饱和带宽之间的调节关系,实现退饱和控制的带宽化整定.最后,通过数值仿真验证了所提方法的有效性.

多策略改进粒子群优化AGV模糊PID控制

为解决AGV在复杂环境下控制精度低下、响应速度慢和鲁棒性差等问题,提出一种基于改进粒子群优化模糊PID控制方法。在粒子群算法(PSO)引入Logistic混沌映射对种群进行初始化,其次对惯性权重和学习因子进行非线性控制更新,提升种群寻优能力和避免陷入局部最优;选取9个测试函数验证改进PSO算法效果。仿真结果表明改进PSO在寻优精度和收敛速度都优于其他3种算法,而且不易陷入局部最优。最后对被控系统进行效果验证,结果表明改进PSO优化模糊PID控制器在常规和外部干扰两种环境下控制性能都优于传统PID和模糊PID,具有高可靠性、高控制精度,满足系统要求。

爆胎车辆动力学分析及模糊PID控制优化策略研究

车辆通过控制系统提高行驶的稳定性,但在爆胎时容易导致车辆行驶失去稳定性,从而造成车辆发生侧翻现象。为改善车辆动力学控制系统输出效果,建立了车辆轮胎动力学模型。引用模糊比例-积分-微分(PID)控制器,给出了模糊PID控制器输出参数与误差和误差变化率的关系图。提出人群搜索算法,利用人群搜索算法迭代搜索原理对模糊PID控制器参数进行寻优。以车辆2种行驶路况为例,利用Matlab软件对爆胎车辆的稳定性进行仿真,比较和分析爆胎车辆优化控制系统的输出效果。结果显示:采用模糊PID控制系统,爆胎车辆产生的偏航角、俯仰角加速度和侧倾角加速度较大。采用人群搜索算法优化模糊PID控制系统,爆胎车辆产生的偏航角、俯仰角加速度和侧倾角加速度较小。爆胎车辆采用人群搜索算法优化后的模糊PID控制器,不仅响应速度快,而且行驶的稳定性较好。

采用改进BP-PID控制的机器人避障仿真研究

针对移动机器人避障过程中行驶路径长、寻路速度慢等问题,提出了一种改进反向传播-比例-积分-微分(BP-PID)控制器,并对移动机器人避障效果进行仿真验证。利用移动机器人在二维坐标系的避障简图,得出了移动机器人运动方程式。引用比例-积分-微分(PID)控制器和3层BP神经网络结构,利用BP神经网络的学习能力调整PID控制器参数。引用粒子群算法进行改进,通过改进粒子群算法在线优化BP-PID控制器,确保移动机器人BP-PID控制器收敛于全局最优值,从而使移动机器人避障效果更好。在不同环境中,采用Matlab软件对移动机器人避障效果进行仿真,比较改进前和改进后的移动机器人避障效果。结果显示:在不同环境中,改进前和改进后的BP-PID控制器均能使移动机器人安全地躲避障碍物;但是采用改进的粒子群算法优化BP-PID控制器,可以使移动机器人运动路径更短,迭代次数更少,搜索时间更短。采用改进BP-PID控制器,能够提高移动机器人避障过程中寻路速度,缩短行驶路径,效果更好。