大气^(210)Po、^(210)Bi和^(210)Pb的沉降通量是海洋中核素示踪颗粒物动力学过程(颗粒有机碳输出、颗粒物输运)的基础参数,为揭示我国近海地区^(210)Po、^(210)Bi和^(210)Pb活度浓度的时空变化规律并估算其沉降入海通量,本文于2016年9...大气^(210)Po、^(210)Bi和^(210)Pb的沉降通量是海洋中核素示踪颗粒物动力学过程(颗粒有机碳输出、颗粒物输运)的基础参数,为揭示我国近海地区^(210)Po、^(210)Bi和^(210)Pb活度浓度的时空变化规律并估算其沉降入海通量,本文于2016年9月至翌年2月和2021年9-11月分别对上海及厦门地区近地表大气气溶胶中^(210)Po、^(210)Pb和^(210)Bi的活度浓度进行了连续观测;基于^(210)Po-^(210)Pb活度比(^(210)Po/^(210)Pb)和^(210)Bi-^(210)Pb活度比(^(210)Bi/^(210)Pb)两种示踪法计算了气溶胶颗粒物的滞留时间,并利用一维简单气溶胶沉降速率模型估算了3种核素以大气沉降方式输入东海的通量。结果显示,2016年上海秋、冬两季^(210)Po、^(210)Bi、^(210)Pb 3种核素活度浓度的变化范围分别为0.11~1.27 m Bq/m^(3)、0.45~1.83 m Bq/m^(3)和1.12~6.10 m Bq/m^(3);2021年秋季厦门^(210)Po、^(210)Bi、^(210)Pb 3种核素活度浓度的变化范围分别为0.05~0.85 m Bq/m^(3)、0.83~2.52 m Bq/m^(3)和0.17~1.32 m Bq/m^(3),上海近地表气溶胶中3种核素的活度浓度秋季平均值比厦门地区高。利用^(210)Po/^(210)Pb和^(210)Bi/^(210)Pb计算得到上海和厦门近地面大气的气溶胶滞留时间存在显著差异,基于^(210)Po/^(210)Pb计算上海气溶胶滞留时间均值为(94±54)d,基于^(210)Bi/^(210)Pb计算上海气溶胶滞留时间均值为(6.4±4.8)d,造成这种差异的原因很可能是两种示踪法本身具有的系统性差异。本文基于一维简易气溶胶沉降速率模型估算了上海地区的^(210)Pb、^(210)Bi和^(210)Po的大气沉降入东海的通量,其在秋季期间的变化范围分别为0.1~26.35 Bq/(m^(2)·d)、0.04~7.91 Bq/(m^(2)·d)和0.01~5.49 Bq/(m^(2)·d)。基于模型估算的^(210)Po、^(210)Bi和^(210)Pb沉降通量与研究区域的实际观测值接近一致,表明利用一维简易气溶胶沉降速率模型间接估算法在替代观测站直测核素的沉降入海通量方面具有一定可行性。展开更多
Lithium-ion battery cathode material Li3V2(PO4)3 was synthesized by sol-gel method using LiOH·H2O, NH4VO3, H3PO4 and citric acid as the raw materials. The samples were investigated by granularity analysis, scanni...Lithium-ion battery cathode material Li3V2(PO4)3 was synthesized by sol-gel method using LiOH·H2O, NH4VO3, H3PO4 and citric acid as the raw materials. The samples were investigated by granularity analysis, scanning electron microscopy and X-ray diffraction. Results showed that sample synthesized by sol-gel procedure had a relatively smaller particle size compared with the products prepared by solid-state reaction, and had an ample surface. Electrochemical properties were investigated by charge/discharge cycle at 0.1 C rate with lithium as the anode. A high discharge specific capacity 122.42 mAh·g-1 was reached at the first cycle, with hardly capacity fading after 20 cycles.展开更多
文摘大气^(210)Po、^(210)Bi和^(210)Pb的沉降通量是海洋中核素示踪颗粒物动力学过程(颗粒有机碳输出、颗粒物输运)的基础参数,为揭示我国近海地区^(210)Po、^(210)Bi和^(210)Pb活度浓度的时空变化规律并估算其沉降入海通量,本文于2016年9月至翌年2月和2021年9-11月分别对上海及厦门地区近地表大气气溶胶中^(210)Po、^(210)Pb和^(210)Bi的活度浓度进行了连续观测;基于^(210)Po-^(210)Pb活度比(^(210)Po/^(210)Pb)和^(210)Bi-^(210)Pb活度比(^(210)Bi/^(210)Pb)两种示踪法计算了气溶胶颗粒物的滞留时间,并利用一维简单气溶胶沉降速率模型估算了3种核素以大气沉降方式输入东海的通量。结果显示,2016年上海秋、冬两季^(210)Po、^(210)Bi、^(210)Pb 3种核素活度浓度的变化范围分别为0.11~1.27 m Bq/m^(3)、0.45~1.83 m Bq/m^(3)和1.12~6.10 m Bq/m^(3);2021年秋季厦门^(210)Po、^(210)Bi、^(210)Pb 3种核素活度浓度的变化范围分别为0.05~0.85 m Bq/m^(3)、0.83~2.52 m Bq/m^(3)和0.17~1.32 m Bq/m^(3),上海近地表气溶胶中3种核素的活度浓度秋季平均值比厦门地区高。利用^(210)Po/^(210)Pb和^(210)Bi/^(210)Pb计算得到上海和厦门近地面大气的气溶胶滞留时间存在显著差异,基于^(210)Po/^(210)Pb计算上海气溶胶滞留时间均值为(94±54)d,基于^(210)Bi/^(210)Pb计算上海气溶胶滞留时间均值为(6.4±4.8)d,造成这种差异的原因很可能是两种示踪法本身具有的系统性差异。本文基于一维简易气溶胶沉降速率模型估算了上海地区的^(210)Pb、^(210)Bi和^(210)Po的大气沉降入东海的通量,其在秋季期间的变化范围分别为0.1~26.35 Bq/(m^(2)·d)、0.04~7.91 Bq/(m^(2)·d)和0.01~5.49 Bq/(m^(2)·d)。基于模型估算的^(210)Po、^(210)Bi和^(210)Pb沉降通量与研究区域的实际观测值接近一致,表明利用一维简易气溶胶沉降速率模型间接估算法在替代观测站直测核素的沉降入海通量方面具有一定可行性。
文摘Lithium-ion battery cathode material Li3V2(PO4)3 was synthesized by sol-gel method using LiOH·H2O, NH4VO3, H3PO4 and citric acid as the raw materials. The samples were investigated by granularity analysis, scanning electron microscopy and X-ray diffraction. Results showed that sample synthesized by sol-gel procedure had a relatively smaller particle size compared with the products prepared by solid-state reaction, and had an ample surface. Electrochemical properties were investigated by charge/discharge cycle at 0.1 C rate with lithium as the anode. A high discharge specific capacity 122.42 mAh·g-1 was reached at the first cycle, with hardly capacity fading after 20 cycles.
