A simulation method for the thermal analysis of InAlAs/InGaAs/InP mid-infrared quantum cascade lasers (QCLs) based on finite-element method (FEM) is presented. The thermal distribution of the QCLs on substrate-side or...A simulation method for the thermal analysis of InAlAs/InGaAs/InP mid-infrared quantum cascade lasers (QCLs) based on finite-element method (FEM) is presented. The thermal distribution of the QCLs on substrate-side or epilayer-side mounting forms is simulated and the results are compared. Results show that the epilayer-side mounting form has much better heat dissipation capability than the substrate-side mounting.展开更多
This paper describes a promising route for the exploration and development of 3.0 THz sensing and imaging with FET-based power detectors in a standard 65 nm CMOS process.Based on the plasma-wave theory proposed by Dya...This paper describes a promising route for the exploration and development of 3.0 THz sensing and imaging with FET-based power detectors in a standard 65 nm CMOS process.Based on the plasma-wave theory proposed by Dyakonov and Shur,we designed high-responsivity and low-noise multiple detectors for monitoring a pulse-mode 3.0 THz quantum cascade laser(QCL).Furthermore,we present a fully integrated high-speed 32×32-pixel 3.0 THz CMOS image sensor(CIS).The full CIS measures 2.81×5.39 mm^(2) and achieves a 423 V/W responsivity(Rv)and a 5.3 nW integral noise equivalent power(NEP)at room temperature.In experiments,we demonstrate a testing speed reaching 319 fps under continuous-wave(CW)illumina-tion of a 3.0 THz QCL.The results indicate that our terahertz CIS has excellent potential in cost-effective and commercial THz imaging and material detection.展开更多
Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This st...Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This study has investigated the application and method development of vapor phase mid-Infrared (mid-IR) spectroscopy using a field portable quantum cascade laser (QCL) based system for the detection and identification of accelerant residues such as gasoline, diesel, and ethanol in fire debris. A searchable spectral library of various ignitable fluids and fuel components measured in the vapor phase was constructed that allowed for real-time identification of accelerants present in samples using software developed in-house. Measurement of vapors collected from paper material that had been doused with an accelerant followed by controlled burning and then extinguished with water showed that positive identification could be achieved for gasoline, diesel, and ethanol. This vapor phase mid-IR QCL method is rapid, easy to use, and has the sensitivity and discrimination capability that make it well suited for non-destructive crime scene sample analysis. Sampling and measurement can be performed in minutes with this 7.5 kg instrument. This vibrational spectroscopic method required no time-consuming sample pretreatment or complicated solvent extraction procedure. The results of this initial feasibility study demonstrate that this portable fire debris analyzer would greatly benefit arson investigators performing analysis on-site.展开更多
文摘A simulation method for the thermal analysis of InAlAs/InGaAs/InP mid-infrared quantum cascade lasers (QCLs) based on finite-element method (FEM) is presented. The thermal distribution of the QCLs on substrate-side or epilayer-side mounting forms is simulated and the results are compared. Results show that the epilayer-side mounting form has much better heat dissipation capability than the substrate-side mounting.
基金Project supported by the National Natural Science Foundation of China under Grant Nos.61874107,62075211.
文摘This paper describes a promising route for the exploration and development of 3.0 THz sensing and imaging with FET-based power detectors in a standard 65 nm CMOS process.Based on the plasma-wave theory proposed by Dyakonov and Shur,we designed high-responsivity and low-noise multiple detectors for monitoring a pulse-mode 3.0 THz quantum cascade laser(QCL).Furthermore,we present a fully integrated high-speed 32×32-pixel 3.0 THz CMOS image sensor(CIS).The full CIS measures 2.81×5.39 mm^(2) and achieves a 423 V/W responsivity(Rv)and a 5.3 nW integral noise equivalent power(NEP)at room temperature.In experiments,we demonstrate a testing speed reaching 319 fps under continuous-wave(CW)illumina-tion of a 3.0 THz QCL.The results indicate that our terahertz CIS has excellent potential in cost-effective and commercial THz imaging and material detection.
文摘Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This study has investigated the application and method development of vapor phase mid-Infrared (mid-IR) spectroscopy using a field portable quantum cascade laser (QCL) based system for the detection and identification of accelerant residues such as gasoline, diesel, and ethanol in fire debris. A searchable spectral library of various ignitable fluids and fuel components measured in the vapor phase was constructed that allowed for real-time identification of accelerants present in samples using software developed in-house. Measurement of vapors collected from paper material that had been doused with an accelerant followed by controlled burning and then extinguished with water showed that positive identification could be achieved for gasoline, diesel, and ethanol. This vapor phase mid-IR QCL method is rapid, easy to use, and has the sensitivity and discrimination capability that make it well suited for non-destructive crime scene sample analysis. Sampling and measurement can be performed in minutes with this 7.5 kg instrument. This vibrational spectroscopic method required no time-consuming sample pretreatment or complicated solvent extraction procedure. The results of this initial feasibility study demonstrate that this portable fire debris analyzer would greatly benefit arson investigators performing analysis on-site.
