期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Synthesis and Luminescence Properties of(Y, Gd)(P, V)O_4:Eu^(3+), Bi^(3+) Red Nano-phosphors with Enhanced Photoluminescence by Bi^(3+), Gd^(3+) Doping 被引量:1
1
作者 Yong Pu Ke Tang +3 位作者 Da-Chuan Zhu Tao Han Cong Zhao Ling-Ling Peng 《Nano-Micro Letters》 SCIE EI CAS 2013年第2期117-123,共7页
A series of(Y_(1-y), Gdy)_(0.95-x)(P_y, V_(1-y))O_4 :0.05Eu^(3+), xBi^(3+)+phosphors have been successfully prepared by a subsection method. The crystal structure, surface morphology and luminescence properties were i... A series of(Y_(1-y), Gdy)_(0.95-x)(P_y, V_(1-y))O_4 :0.05Eu^(3+), xBi^(3+)+phosphors have been successfully prepared by a subsection method. The crystal structure, surface morphology and luminescence properties were investigated. It was found that the sintered samples crystallized in a tetragonal crystal system with space group I_(41)/amd(a = b = 0.7119 nm, c = 0.6290 nm). The products presented rod-like morphology with length of 100-150 nm and width of 50-100 nm. A maximum peak at 619 nm(~5D_0 →~7F_2) was observed in emission spectrum of the phosphors. It was also found that co-doping of Bi^(3+)+, P5+and Gd^(3+)ions into YVO_4:Eu^(3+)can not only made the right edge of the excitation band shift to the long-wavelength region, but also increased the emission intensity at 619 nm sharply and decreased the lifetime of fluorescence decay. These results may expand the application scope of the phosphors. 展开更多
关键词 (y gd)(p v)O4:eu3%pLUS% bi3%pLUS% Rod-like Red phosphors pHOTOLUMINESCENCE DOpING
下载PDF
溶胶凝胶法制备(Y,Gd)(V,P)O_4∶Eu^(3+)纳米红色荧光粉 被引量:3
2
作者 董其铮 何玲 孙卫民 《兰州理工大学学报》 CAS 北大核心 2016年第1期31-34,共4页
使用溶胶凝胶法将Gd^(3+)和P^(5+)掺杂到纳米YVO4∶Eu^(3+)体系中,得到纳米红色荧光粉(Y,Gd)(V,P)O_4∶Eu^(3+).通过X射线衍射,透射电镜和扫描电镜测试表明,样品的结晶度较好,具有球形形貌并有较好的分散性,其颗粒尺寸约为40nm.通过对... 使用溶胶凝胶法将Gd^(3+)和P^(5+)掺杂到纳米YVO4∶Eu^(3+)体系中,得到纳米红色荧光粉(Y,Gd)(V,P)O_4∶Eu^(3+).通过X射线衍射,透射电镜和扫描电镜测试表明,样品的结晶度较好,具有球形形貌并有较好的分散性,其颗粒尺寸约为40nm.通过对系列样品激发光谱的对比研究发现,掺入Gd^(3+)和P^(5+)后,样品在真空紫外区域内基质吸收的强度明显增加,对应在发射光谱中Eu^(3+)在619nm处的红光发射强度也明显增强,其中Eu^(3+)的5 D0-7 F2红光发射强度相当于商用红粉KX-504的109.7%,并且其色坐标比商用粉更加接近标准红色值,说明其色纯度更好. 展开更多
关键词 纳米荧光粉 (y gd)(v p)O4eu3%pLUS% 溶胶凝胶法
下载PDF
溶剂热-溶胶凝胶两步法合成(Y,Gd)(P,V)O4:Eu^3+,Bi^3+荧光粉及其发光研究 被引量:3
3
作者 蒲勇 刘碧桃 +3 位作者 朱达川 彭玲玲 韩涛 于泓 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2015年第10期2529-2533,共5页
采用溶剂热-溶胶凝胶两步法合成了(Y1-z,Gd z)1-x-y(P z,V1-z)O4:x Eu3+,yBi3+系列红色荧光粉。用XRD、SEM和荧光分光光度计,对试样的晶体结构、表面形貌及发光性能进行了表征。结果表明:样品为四方晶系,掺杂离子的加入对基质晶体结构... 采用溶剂热-溶胶凝胶两步法合成了(Y1-z,Gd z)1-x-y(P z,V1-z)O4:x Eu3+,yBi3+系列红色荧光粉。用XRD、SEM和荧光分光光度计,对试样的晶体结构、表面形貌及发光性能进行了表征。结果表明:样品为四方晶系,掺杂离子的加入对基质晶体结构影响不大;样品形貌均一,呈短杆状或椭圆状;激发光谱由位于250~400 nm的O2--V5+带和Eu3+-O2-带组成;最强发射峰位于619 nm,归属于Eu3+的5D0→7F2特征跃迁发射;Eu3+的最佳掺杂量为5 mol%(x=0.05);掺杂Bi3+、Gd3+、P5+后,样品发射强度得到显著提高,Bi3+的掺杂还会使激发带红移至400 nm。说明这类荧光粉是可用于近紫外芯片激发的白光LED用红色荧光粉。 展开更多
关键词 白光LED (y gd)(p v)O4:eu^3%pLUS% bi^3%pLUS% 两步法 红色荧光粉
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部