Ordered mesoporous materials for water pollution treatment:Adsorption and catalysis

To meet the growing emission of water contaminants,the development of new materials that enhance the efficiency of the water treatment system is urgent.Ordered mesoporous materials provide opportunities in environmental processing applications due to their exceptionally high surface areas,large pore sizes,and enough pore volumes.These properties might enhance the performance of materials concerning adsorption/catalysis capability,durability,and stability.In this review,we enumerate the ordered mesoporous materials as adsorbents/catalysts and their modifications in water pollution treatment from the past decade,including heavy metals(Hg^(2+),Pb^(2+),Cd^(2+),Cr^(6+),etc.),toxic anions(nitrate,phosphate,fluoride,etc.),and organic contaminants(organic dyes,antibiotics,etc.).These contributions demonstrate a deep understanding of the synergistic effect between the incorporated framework and homogeneous active centers.Besides,the challenges and perspectives of the future developments of ordered mesoporous materials in wastewater treatment are proposed.This work provides a theoretical basis and complete summary for the application of ordered mesoporous materials in the removal of contaminants from aqueous solutions.

Effects of Combined Application of Water Retaining Agents and Organic Materials on Water Holding Characteristics of Yellow Brown Soils in Hilly Areas

[Objective] The aim was to reduce fertilizer and water losses caused by surface runoffs in rainy season and provide scientific references for soil moisture in arid season. [Method] The application proportion of complex water-holding organic materials was determined by multi-factor mixture experiment and the curve changes of soil moisture characters were tested to analyze water-holding capacity and water availability of soils. [Result] The initial moisture content of soil with different mixture proportions improved in varying degrees. For example, when water-retention agents reached 0.4% and 0.6% of soil weight, soil moisture contents were 69.0% and70.5%, respectively, which showed significant differences with the control（S0.0）. Soil dehydration terms in different treatments all extended, prolonging in the range of4.6-14 d. [Conclusion] The applications of water-retention agent and organic material would improve water-holding capacity of hills and low mountains, and initial moisture content and dehydration cycle tend to be volatile upon mixture proportion. Therefore,it is necessary to adjust soil fertility, crop species, and irrigation to meet crop demands on fertilizer and water.

Chemical and Isotopic Characteristics of the Water and Suspended Particulate Materials in the Yangtze River and Their Geological and Environmental Implications

The chemical and isotopic characteristics of the water and suspended particulate materials（SPM） in the Yangtze River were investigated on the samples collected from 25 hydrological monitoring stations in the mainsteam and 13 hydrological monitoring stations in the major tributaries during 2003 to 2007. The water samples show a large variation in both δD（ 30‰ to 112‰） and δ18O（ 3.8‰ to 15.4‰） values. Both δD and δ18O values show a decrease from the river head to the Jinsha Jiang section and then increase downstream to the river mouth. It is found that the oxygen and hydrogen isotopic compositions of the Yangtze water are controlled by meteoric precipitation, evaporation, ice（and snow） melting and dam building. The Yangtze SPM concentrations show a large variation and are well corresponded to the spatial and temporal changes of flow speed, runoff and SPM supply, which are affected by the slope of the river bed, local precipitation rate, weathering intensity, erosion condition and anthropogenic activity. The Yangtze SPM consists of clay minerals, clastic silicate and carbonate minerals, heavy minerals, iron hydroxide and organic compounds. From the upper to lower reaches, the clay and clastic silicate components in SPM increase gradually, but the carbonate components decrease gradually, which may reflect changes of climate and weathering intensity in the drainage area. Compared to those of the upper crust rocks, the Yangtze SPM has lower contents of SiO2, CaO, K2 O and Na2 O and higher contents of TFe2 O3 and trace metals of Co, Ni, Cu, Zn, Pb and Cd. The ΣREE in the Yangtze SPM is also slightly higher than that of the upper crust. From the upper to lower reaches, the CaO and MgO contents in SPM decrease gradually, but the SiO2 content increases gradually, corresponding to the increase of clay minerals and decrease of the carbonates. The δ30SiSPM values（ 1.1‰ to 0.3‰） of the Yangtze SPM are similar to those of the average shale, but lower than those of the granite rocks（ 0.3‰ to 0.3‰）, reflecting the effect of silicon isotope fractionation in silicate weathering process. The δ30SiSPM values of the Yangtze SPM show a decreasing trend from the upper to the middle and lower reaches, responding to the variation of the clay content. The major anions of the river water are HCO 3, SO 4 2, Cl, NO 3, SiO 4 4 and F and the major cations include Ca2＋, Na＋, Mg2＋, K＋ and Sr2＋. The good correlation between HCO3-content and the content of Ca2＋may suggest that carbonate dissolution is the dominate contributor to the total dissolved solid（TDS） of the Yangtze River. Very good correlations are also found among contents of Cl, SO4 2, Na＋, Mg2＋, K＋and Sr2＋, indicating the important contribution of evaporite dissolution to the TDS of the Yangtze River. High TDS contents are generally found in the head water, reflecting a strong effect of evaporation in the Qinghai-Tibet Plateau. A small increase of the TDS is generally observed in the river mouth, indicating the influence of tidal intrusion. The F and NO3 contents show a clear increase trend from the upstream to downstream, reflecting the contribution of pesticides and fertilizers in the Chuan Jiang section and the middle and lower reaches. The DSi shows a decrease trend from the upstream to downstream, reflecting the effect of rice and grass growth along the Chuan Jiang section and the middle and lower reaches. The dissolved Cu, Zn and Cd in the Yangtze water are all higher than those in world large rivers, reflecting the effect of intensive mining activity along the Yangtze drainage area. The Yangtze water generally shows similar REE distribution pattern to the global shale. The δ30SiDiss values of the dissolved silicon vary from 0.5‰ to 3.7‰, which is the highest among those of the rivers studied. The δ30SiDiss values of the water in the Yangtze mainsteam show an increase trend from the upper stream to downstream. Its DSi and δ30SiDiss are influenced by multiple processes, such as weathering process, phytolith growth in plants, evaporation, phytolith dissolution, growth of fresh water diatom, adsorption and desorption of aqueous monosilicic acid on iron oxide, precipitation of silcretes and formation of clays coatings in aquifers, and human activity. The δ34SSO4 values of the Yangtze water range from 1.7‰ to 9.0‰. The SO4 in the Yangtze water are mainly from the SO4 in meteoric water, the dissolved sulfate from evaporite, and oxidation of sulfide in rocks, coal and ore deposits. The sulfate reduction and precipitation process can also affect the sulfur isotope composition of the Yangtze water. The87Sr/86Sr ratios of the Yangtze water range from 0.70823 to 0.71590, with an average value of 0.71084. The87Sr/86Sr ratio and Sr concentration are primary controlled by mixing of various sources with different87Sr/86Sr ratios and Sr contents, including the limestone, evaporite and the silicate rocks. The atmospheric precipitation and anthropogenic inputs can also contribute some Sr to the river. The δ11B values of the dissolved B in the Yangtze water range from 2.0‰ to 18.3‰, which is affected by multifactors, such as silicate weathering, carbonate weathering, evaporite dissolution, atmospheric deposition, and anthropogenic inputs.

Influence of Composite Phosphate Inorganic Antibacterial Materials Containing Rare Earth on Activated Water Property of Ceramics

Antibacterial ceramic was prepared by doping enamel slurry with composite phosphate inorganic antibacterial materials containing rare earth (inorganic antibacterial additives), and then the mechanisms for activating water and improving seed germinative property were tested by nuclear magnetic resonance (NMR) and the method of testing oxygen dissolved in activated water. Results show that the half peak width of (()^(17)O-NMR) for tap water activated by the antibacterial ceramic drops from 115.36 to 99.15 Hz, and oxygen concentrations of activated water increase by 20%, germinate rate of horsebean and earthnut seeds increases by 12.5% and 7.5%, respectively. Therefore antibacterial ceramic doped enamel slurry with inorganic antibacterial additives containing rare earth can reduce the volume of clusters of water molecules, improve activation of tap water, and promote plant seeds germinate.

The application of perovskite materials in solar water splitting

Solar water splitting is a promising strategy for sustainable production of renewable hydrogen,and solving the crisis of energy and environment in the world.However,large-scale application of this method is hampered by the efficiency and the expense of the solar water splitting systems.Searching for non-toxic,low-cost,efficient and stable photocatalysts is an important way for solar water splitting.Due to the simplicity of structure and the flexibility of composition,perovskite based photocatalysts have recently attracted widespread attention for application in solar water splitting.In this review,the recent developments of perovskite based photocatalysts for water splitting are summarized.An introduction including the structures and properties of perovskite materials,and the fundamentals of solar water splitting is first provided.Then,it specifically focuses on the strategies for designing and modulating perovskite materials to improve their photocatalytic performance for solar water splitting.The current challenges and perspectives of perovskite materials in solar water splitting are also reviewed.The aim of this review is to summarize recent findings and developments of perovskite based photocatalysts and provide some useful guidance for the future research on the design and development of highly efficient perovskite based photocatalysts and the relevant systems for water splitting.

Chemical and Isotopic Characters of the Water and Suspended Particulate Materials in the Yellow River and Their Geological and Environmental Implications

The chemical and isotopic characteristics of the water and suspended particulate materials （SPM） in the Yellow River were investigated on the samples collected from 29 hydrological monitoring stations in the mainstem and several major tributaries during 2004 to 2007. The JD and δ^18O values of the Yellow River water vary in large ranges from -32%0 to -91‰ and from -3.1‰ to -12.5‰, respectively. The characters of H and O isotope variations indicate that the major sources of the Yellow River water are meteoric water and snow melting water, and water cycle in the Yellow River basin is affected strongly by evaporation process and human activity. The average SPM content （9.635 g/L） of the Yellow River is the highest among the world large rivers. Compared with the Yangtze River, the Yellow River SPM has much lower clay content and significantly higher contents of clastic silicates and carbonates. In comparison to the upper crust rocks, the Yellow River SPM contains less SiO2, CaO, K2O and Na2O, but more TFe203, Co, Ni, Cu, Zn, Pb and Cd. The abnormal high Cd contents found in some sample may be related to local industrial activity. The REE contents and distribution pattern of the Yellow River SPM are very close to the average value of the global shale. The average δ^30Sisp in the Yellow River （-0.11‰） is slightly higher than the average value （-0.22‰） of the Yangtze River SPM. The major factors controlling the δ^30Si SPM of the Yellow River are the soil supply, the isotopic composition of the soil and the climate conditions. The TDS in the Yellow River are the highest among those of world large rivers. Fair correlations are observed among Cl, Na^＋, K^＋, and Mg^2＋ contents of the Yellow River water, indicating the effect of evaporation. The Ca^2＋ and Sr^2＋ concentrations show good correlation to the SO42 concentration rather than HCO3-concentration, reflecting its origin from evaporates. The NO3-contents are affected by farmland fertilization. The Cu, Zn and Cd contents in dissolved load of the Yellow River water are all higher than those of average world large rivers, reflecting the effect of human activity. The dissolved load in the Yellow River water generally shows a REE distribution pattern parallel to those for the Yangtze River and the Xijiang River. The δ^30Si values of the dissolved silicon vary in a range from 0.4%0 to 2.9%0, averaging 1.34%o. The major processes controlling the Dsi weathering process of silicate rocks, growth of and δ^30SiDiss of the Yellow River water are the phytolith in plants, evaporation, dissolution of phytolith in soil, growth of fresh water diatom, adsorption and desorption of aqueous monosilicic acid on iron oxide and human activities. The average δ^30^SiDiss value of the Yellow River is significantly lower than that of the Nile River, Yangtze River and Siberia rivers, but higher than those of other rivers, reflecting their differences in chemical weathering and biological activity. The δ^34SSO4 values of the Yellow River water range from -3.8%0 to 14.1%o, averaging 7.97%0. There is some correlation between SO4^2- content and δ^34SSO4. The factors controlling the δ^34SSO4 of the Yellow River water are the SO4 in the meteoric water, the SO4 from gypsum or anhydrite in evaporite rocks, oxidation and dissolution of sulfides in the mineral deposits, magmatic rocks and sedimentary rocks, the sulfate reduction and precipitation process and the sulfate from fertilizer. The ^87Sr/^86Sr ratios of all samples range from 0.71041 to 0.71237, averaging 0.71128. The variations in the ^87Sr/^86Sr ratio and Sr concentration of river water are primarily caused by mixing of waters of various origins with different 87Sr/S6Sr ratios and Sr contents resulting from water-rock interaction with different rock types.

Effects of Specimen Shape and Size on Water Loss and Drying Shrinkage of Cement-based Materials

The effects of specimen size and shape on development of water loss and shrinkage of mortar and concrete respectively were investigated. The experimental results showed that the effects of specimen size and shape on water loss ratio were consistent with those on drying shrinkage strain. It is also indicated that drying shrinkage strain has obvious linear correlation with water loss ratios independent of specimen size and shape. The effects of specimen size and shape on the water loss ratio were embodied in established model of averaged relative humidity improved by considering effects of sequential hydration and calculated by finite difference method. Furthermore, the effects of specimen size and shape on drying shrinkage strain of concrete were experimentally deduced and applied to modify criterion EB-FIP1990. The comparison between experimental and calculated results shows that the modified EB-FIP1990 can be adopted to predict drying shrinkage strain of concrete with reasonable accuracy.

Recentadvancesincarbon‐basedmaterials for solar‐driven interfacial photothermal conversion water evaporation:Assemblies,structures,applications,and prospective

The shortage of fresh water in the world has brought upon a serious crisis to human health and economic development.Solar‐driven interfacial photothermal conversion water evaporation including evaporating seawater,lake water,or river water has been recognized as an environmentally friendly process for obtaining clean water in a low‐cost way.However,water transport is restricted by itself by solar energy absorption capacity's limits,especially for finite evaporation rates and insufficient working life.Therefore,it is important to seek photothermal conversion materials that can efficiently absorb solar energy and reasonably design solar‐driven interfacial photothermal conversion water evaporation devices.This paper reviews the research progress of carbon‐based photothermal conversion materials and the mechanism for solar‐driven interfacial photothermal conversion water evaporation,as well as the summary of the design and development of the devices.Based on the research progress and achievements of photothermal conversion materials and devices in the fields of seawater desalination and photothermal electric energy generation in recent years,the challenges and opportunities faced by carbon‐based photothermal conversion materials and devices are discussed.The prospect of the practical application of solar‐driven interfacial photothermal conversion evaporation technology is foreseen,and theoretical guidance is provided for the further development of this technology.

Structure Characterization and Dephosphorization Effect Analysis of Oyster Shell-silica Micropowder Waste Water Dephosphorization Materials

In this work,the effects of pH value of waste water and initial concentration of phosphorus on dephosphorization materials were investigated.The materials were prepared by shaping,sintering and hydrothermal reshaping oyster shell and silica micro-powder.Different concentrations of phosphorus-contained waste water were simulated with potassium dihydrogen phosphate solution,the effect of dephosphorization was tested with phosphomolybdenum blue spectrophotometer method,and the crystal phase and microstructure of materials were characterized by XRD and SEM methods. It was indicated that dephosphorization was completed in 6 h when the initial phosphorus concentration in waste water was lower than 15 mg/L, and the dephosphorization time prolonged as the increase of phosphorus concentration. It was observed that the pH value of waste water influenced dephosphorization significantly, and neutral subalkalic environment favored dephosphorization. When the pH value was 11, the efficiency of dephosphozation was the greatest. For waste water with an initial concentration of 20 mg/L, the dephosphozation rate is close to 100% in8 h.

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.

2D materials modulating layered double hydroxides for electrocatalytic water splitting

Exploring highly efficient electrochemical water splitting catalysts has recently attracted extensive research interest from both fundamental researches and practical applications.Transition metal‐based layered double hydroxides(LDHs)have been proved to be one of the most efficient materials for oxygen evolution reaction(OER),however,still suffered from low conductivity and sluggish kinetics for hydrogen evolution reaction(HER),which largely inhibited the overall water splitting efficiency.To address this dilemma,enormous approaches including doping regulation,intercalation tuning and defect engineering are therefore rationally designed and developed.Herein,we focus on the recent exciting progress of LDHs hybridization with other two‐dimensional(2D)materials for water splitting reactions,not barely for enhancing OER efficiency but also for boosting HER activity.Particularly,the structural features,morphologies,charge transfer and synergistic effects for the heterostructure/heterointerface that influence the electrocatalytic performance are discussed in details.The hybrid 2D building blocks not only serve as additional conductivity and structural supported but also promote electron transfer at the interfaces and further enhance the electrocatalytic performance.The construction and application of the nanohybrid materials will guide a new direction in developing multifunctional materials based on LDHs,which will contribute to energy conversion and storage.

Determination of water equivalent ratio for some dosimetric materials in proton therapy using MNCPX simulation tool

The water equivalent ratio(WER) was calculated for polypropylene(PP), paraffin, polyethylene(PE), polystyrene(PS), polymethyl methacrylate(PMMA), and polycarbonate materials with potential applications in dosimetry and medical physics. This was performed using the Monte Carlo simulation code, MCNPX, at different proton energies. The calculated WER values were compared with National Institute of Standards and Technology(NIST) data, available experimental and analytical results,as well as the FLUKA, SRIM, and SEICS codes. PP and PMMA were associated with the minimum and maximum WER values, respectively. Good agreement was observed between the MCNPX and NIST data. The biggest difference was 0.71% for PS at 150 MeV proton energy. In addition, a relatively large positive correlation between the WER values and the electron density of the dosimetric materials was observed. Finally, it was noted that PE presented the most analogous Depth Dose Characteristics to liquid water.

Toward practical photoelectrochemical water splitting and CO_(2) reduction using earth-abundant materials

Photoelectrochemical(PEC)fuel generation from water splitting and CO_(2)reduction(CO_(2)R)utilizing solar energy holds immense potential to solve the current energy and environmental issues.In the past decades,numerous studies have been devoted to this fast-growing research field,and it is essential to develop efficient photoelectrodes with earth-abundant materials for the practical application of PEC systems.A thorough review of earth-abundant materials and associated devices for PEC fuel generation is beneficial to uncover the inherent obstacles and pave the way for future research.Herein,we summarize the recent progress of earth-abundant light-absorbers and cocatalysts in the PEC systems.The unbiased configurations and scaling-up strategies of PEC devices using earth-abundant materials are examined.A comparison between PEC water splitting and CO_(2)R is carried out to promote better understanding of the design principles for practical materials and devices.Last,the prospects on advanced materials,underlying mechanisms,and reaction systems of PEC water splitting and CO_(2)R are proposed.

Application of Mulching Materials of Rainfall Harvesting System for Improving Soil Water and Corn Growth in Northwest of China

The ridge and furrow rainfall harvesting（RFRH） system is used for dryland crop production in northwest of China.To determine the effects of RFRH using different mulching materials on corn growth and water use efficiency（WUE）,a field experiment was conducted during 2008-2010 at the Heyang Dryland Experimental Station,China.Four treatments were used in the study.Furrows received uncovered mulching in all RFRH treatments whereas ridges were mulched with plastic film（PF）,biodegradable film（BF） or liquid film（LF）.A conventional flat field without mulching was used as the control（CK）.The results indicated that the average soil water storage at depths of 0-200 cm were 8.2 and 7.3%,respectively higher with PF and BF than with CK.However,LF improved soil water storage during the early growth stage of the crop.Compared with CK,the corn yields with PF and BF were increased by 20.4 and 19.4%,respectively,and WUE with each treatment increased by 23.3 and 21.7%,respectively.There were no significant differences in corn yield or WUE with the PF and BF treatments.The net income was the highest with PF,followed by BF,and the 3-yr average net incomes with these treatments were increased by 2 559 and 2 430 CNY ha-1,respectively,compared with CK.BF and PF had similar effects in enhancing the soil water content,crop yield and net income.Therefore,it can be concluded that biodegradable film may be a sustainable ecological alternative to plastic film for use in the RFRH system in northwest of China.

Treatment of tunnel wash waters-experiments with organic sorbent materials.PartⅠ:Removal of polycyclic aromatic hydrocarbons and nonpolar oil

Tunnel wash waters characterize all waters that run off after washing procedures of tunnels are performed.These waters represent a wide spectrum of organic and inorganic pollutants,such as polycyclic aromatic hydrocarbons(PAHs)and toxic metals.Removal of such contaminants from water runoff was investigated using laboratory tests after washing procedure was performed on two road tunnels in eastern Norway(Hanekleiv and Bragernes).Due to diverse character of both,treatment media and treated wash waters, the wh...

Application of Air-cooled Blast Furnace Slag Aggregates as Replacement of Natural Aggregates in Cement-based Materials：A Study on Water Absorption Property

The influence of air-cooled blast furnace slag aggregates as replacement of natural aggregates on the water absorption of concrete and mortar was studied, and the mechanism was analyzed. The interface between aggregate and matrix in concrete was analyzed by using a micro-hardness tester, a laser confocal microscope and a scanning electron microscope with backscattered electron image mode. The pore structure of mortar matrixes under different curing conditions was investigated by mercury intrusion porosimetry. The results showed that when natural aggregates were replaced with air-cooled blast furnace slag aggregates in mortar or concrete, the content of the capillary pore in the mortar matrix was reduced and the interfacial structure between aggregate and matrix was improved, resulting in the lower water absorption of mortar or concrete. Compared to the concrete made with crushed limestone and natural river sand, the initial absorption coefficient, the secondary absorption coefficient and the water absorption capacity through the surface for 7 d of the concrete made from crushed air-cooled blast furnace slag and air-cooled blast furnace slag sand were reduced by 48.9%, 52.8%, and 46.5%, respectively.

A Perspective on Human Exposures to Plastics Additives in Water-Packaging Materials

Plastic and polymer additives (PA) have unique rational advantages for various water and food packaging applications. However, their (bio)chemical natures are recently recognized for their negative human health impacts. The major adverse consequence of these additives in consumer products is in the form of endocrine-disruption related health-downgrades. Such findings still remain underappreciated in most parts globally;part of which could be ascribed to fragmented studies towards better understanding on the occurrence, release and migration, human exposure, epidemiology and risk assessment of PA from packaging materials. In addition there is limited and disconnected dissemination of research findings on PA effects and mitigation measures to society at present. In light of appropriateness of this topic, a trans-disciplinary research agenda is required for addressing exposure routes to PA, human health burden and prevention measures. This perspective article discusses important research questions relating to PA, which try to shed light to a grey scientific area and help increase consumers’ awareness and intervention to such exposures.

Proof of Six-Wave Resonance Conditions of Ocean Surface Gravity Waves in Deep Water

A necessary big step up in the modern water wave theories and their widespread application in ocean engineering is how to obtain 6-wave resonance conditions and to prove it. In the light of the existing forms and characteristics of 3-wave, 4-wave and 5-wave resonance conditions, the 6-wave resonance conditions are proposed and proved for currently a maximum wave-wave resonance interactions of the ocean surface gravity waves in deep water, which will be indispensable to both the Kolmogorov spectrum of the corresponding universal wave turbulence and a synthetic 4-5-6-wave resonant model for the ocean surface gravity waves.

Seismic performance evaluation of water supply pipes installed in a full-scale RC frame structure based on a shaking table test

As an important part of nonstructural components,the seismic response of indoor water supply pipes deserves much attention.This paper presents shaking table test research on water supply pipes installed in a full-scale reinforced concrete(RC)frame structure.Different material pipes and different methods for penetrating the reinforced concrete floors are combined to evaluate the difference in seismic performance.Floor response spectra and pipe acceleration amplification factors based on test data are discussed and compared with code provisions.A seismic fragility study of displacement demand is conducted based on numerical simulation.The acceleration response and displacement response of different combinations are compared.The results show that the combination of different pipe materials and different passing-through methods can cause obvious differences in the seismic response of indoor riser pipes.

Corrosion of candidate materials for supercritical water-cooled reactor

Supercritical water reactor(SCWR) was proposed as a GenerationⅣconcept for building large capacity nuclear power plants.Comparing with the present GenerationⅡandⅢlight water reactors,SCWR possesses great advantages of 10%higher efficiency,simpler system design,better sustainability,and so on. However,the selection of materials for fuel cladding and reactor internals of SCWR is facing a great challenge. Corrosion in supercritical steam is of the first important issue to be solved to meet the stringent requirement of the reactor internal components.Corrosion screening tests were conducted on candidate materials for nuclear fuel cladding and reactor internals of supercritical water reactor(SCWR) in static and re-circulating autoclave at the temperatures of 550,600 and 650℃,pressure of about 25 MPa,deaerated or saturated dissolved hydrogen(STP). Nickel base alloy type Hastelloy C276,austenitic stainless steels type 304NG,AL-6XN,HR3C.NF709 and SAVE 25,ferritic/martensitic(F/M) steel type P92,P122 and 410,and oxide dispersion strengthened steel MA 956,are tested.This paper presents corrosion rate,and focuses on the formation and breakdown of corrosion oxide film,and proposes the future trend for the development of SCWR internal structure materials.