Effects of Ag-carrying Zirconium Phosphate on the Kinetics of Growth of the Roots of Culture Artemisia annua

在植物组织和细胞培养过程中 ,尤其是在生物反应器培养中的染菌问题 ,一直是制约植物细胞培养工业化的难题。通过比较各种防腐剂的抑菌效果 ,确定银型磷酸锆盐抗菌粉为青蒿根培养的最佳防腐剂。银型磷酸锆盐抗菌粉在浓度为 30mg/L时 ,既能降低培养液的染菌几率 ,又不明显抑制青蒿根的生长及青蒿素的生物合成。在添加 30mg/L抗菌粉的培养液中进行的青蒿根生长、pH值变化以及残糖、铵离子和硝酸根离子消耗的动力学研究表明 ,在 4 0d内青蒿根在培养液中生长良好 ,营养成分的消耗和对照呈相似的趋势。

Tribological Properties of Magnesium Ion-exchanged α-Zirconium Phosphate as a Solid Lubricant Additive in Lithium Grease

Magnesium ion-exchanged a-zirconium phosphates(Mg-α-ZrP) with particle sizes of 600 and 80 nm were prepared through the sealed ion-exchange and one-step hydrothermal synthesis methods, respectively. It was found that larger particles of Mg-α-ZrP had a higher load-carrying capacity than that of smaller particles, whereas smaller Mg-α-ZrP particles had better anti-wear properties than that of larger Mg-α-ZrP particles under mild loads. The correlation between the particle size of the sample and the surface roughness of the friction pair thus seems to be a key factor influencing the performance.

Preintercalation of Layered γ-Zirconium Phosphate for Preparation of Immobilized Hemoglobin

Layeredγ-Zirconium phosphate (γ-ZrP) preintercalated with butylamine, tetra (n-butylammonium)hydroxide, dimethylamine respectively, or only ultrasonificated, for preparation of immobilized hemoglobin were investigated in this report.

Antimicrobial effects of silver zeolite,silver zirconium phosphate silicate and silver zirconium phosphate against oral microorganisms

Objective:To evaluate the antimicrobial activities of silver inorganic materials,including silver zeolite(AgZ),silver zirconium phosphate silicate(AgZrPSi)and silver zirconium phosphate(AgZrp),against oral microorganisms.In line with this objective,the morphology and structure of each type of silver based powders were also investigated.Methods:The antimicrobial activities of AgZ,AgZrPSi and AgZrP were tested against Streptococcus mutans,Lactobacillus casei,Candida albicans and Staphylococcus aureus using disk diffusion assay as a screening test.The minimum inhibitory concentration(MIC)and minimum lethal concentration(MLC)were determined using the modified membrane method.Scanning electron microscope and X-ray diffraction were used to investigate the morphology and structure of these silver materials.Results:All forms of silver inorganic materials could inhibit the growth of all test microorganisms.The MIC of AgZ,AgZrPSi and AgZrP was 10.0 g/L whereas MLC ranged between 10.0-60.0 g/L.In terms of morphology and structure.AgZrPSi and AgZrP had smaller sized particles(1.5-3.0μm)and more uniformly shaped than AgZ.Conclusions:Silver inorganic materials in the form of AgZ,AgZrPSi and AgZrP had antimicrobial effects against all test oral microorganisms and those activities may be influenced by the crystal structure of carriers.These results suggest that these silver materials may be useful metals applied to oral hygiene products to provide antimicrobial activity against oral infection.

Direct Conversion of Glucose to 5-Hydroxymethylfurfural over Zirconium Phosphate Catalyst in a Biphasic System

Efficient and selective production of 5-hydroxymethylfurfural(HMF) from glucose was achieved in the presence of zirconium phosphate(ZrPO) catalyst in a biphasic system.With the use of this catalyst,a high HMF yield of 56.8% was obtained from glucose in a water-tetrahydrofuran(THF) biphasic system.Characterization results showed that such catalyst had weak to strong acid sites and contained both Lewis and Br?nsted acid sites.The results of comparative experiments over some other solid acid catalysts demonstrated that the Lewis acid sites on the ZrPO catalyst played a crucial role in the isomerization of glucose to fructose and the Br?nsted ones were active in the dehydration of generated fructose to HMF.Moreover,less levulinic acid(LA) and formic acid(FA)(0.5%) were detected in the reaction solution,indicating that this ZrPO catalyst exhibited high selectivity towards the formation of HMF.Furthermore,the ZrPO catalyst was very stable and could maintain its activity after being used for six times.

Synthesis and Tribological Properties of Sodium-Ion-Exchangedα-Zirconium Phosphate

Sodium-ion-exchangedα-zirconium phosphate(Na-α-ZrP)was synthesized by using disodium hydrogen phosphate as the sodium source,which was an efficient ion exchange way.The tribological properties of Na-α-ZrP as an additive in lithium grease were investigated by a four-ball friction tester and a SRV tester,respectively.The synergistic effect of Na-α-ZrP with ZDDP was also studied.Results indicate that Na-α-ZrP can effectively improve the antiwear and friction-reducing properties of lithium grease.Combined with ZDDP,the grease demonstrated excellent anti-wear performance,especially under high loads.The possible wear mechanism was discussed by observing the worn surface using 3D optical profiler,scanning electron microscopy(SEM),energy-dispersive spectrometry(EDS),and X-ray photoelectron spectroscopy(XPS).The simple synthetic method and superior tribological performance make the Na-α-ZrP become a potential choice for lubricant additives.

A new method of immobilizing ionic liquids into layered zirconium phosphates

In this work, a new method of a series of ion liquids (ILs) 1-alkyl-3-methylimidazolium chloride [Cnmim]Cl (n = 2, 4, 6, 8) intercalation into layered zirconium phosphates was investigated. It was found that the α-ZrP·2BA (i.e. pre-intercalated BA was arranged in a bilayer mode in the galleries of α-ZrP) was a suitable host for intercalation ILs: ILs was inserted through exchanging pre-intercalated BA. And the intercalation orientation was investigated by use of X-ray diffraction (XRD) experiments and molecular modeling calculation.

Synthesis,Proton Conductivity and Humidity Sensing Property ofγ-Type Zirconium Hydrogen Phosphate,Zr(HPO_4)_2·2H_2O

A γ - type of layered zirconium hydrogen phosphate, Zr(HPO 4) 2·2H 2O( γ ZrP), was synthesized under hydrothermal conditions and characterized by powder X ray diffraction and thermogravimetric analysis. The temperature dependence of the proton conductivity in γ ZrP was investigated in a temperature range of 23￣413 ℃ by ac impedance spectroscopy. The variation of the conductivity with water loss and phase transitions was observed. The best proton conductivity in γ ZrP is 6×10 -4 S·cm -1 at 60 ℃. The proton conductivities in the dehydrated sample are ￣10 -5 at 150 ℃ and ￣10 -4 S·cm -1 at 350 ℃, respectively. The conductivities as a function of humidity in the temperature range of 120￣200 ℃ were measured.

Fluorescence property of tris(2,2′-bipyridine)ruthenium(Ⅱ)dichloride immobilized in the gallery ofγ-zirconium phosphates

Tris （2, 2′-bipyridine） ruthenium （Ⅱ） （Ru（bpy）3^2＋） dichloride was successfully immobilized into the galleria of layered gamma zirconium phosphate （γ-ZrP） preintercalated by butyl amine（BA）. The compounds showed extended luminescence lifetime of about four times of unimmobilized metal complex.

Study on Synthesis and Intercalation Behavior of Layered Zirconium Proline-N-methylphosphonate-phosphate

Zirconium proline-N-methylphosphonate-phosphate (α-ZPMPP) was prepared in the presence of HF for the first time. The a-ZPMPP sample is highly crystallized with interlayer distance of 1.52 nm. The interlayer distance of complex of α-ZPMPP with n-butylamine (α-ZPMPP-BA) is in 0.45 nm larger than that of α-ZPMPP. The α-ZPMPP possesses different intercalation behavior of host-guest compound from α-ZP.

SYNTHESIS, CHARACTERIZATION AND APPLICATION IN PEMFC OF ZIRCONIUM OXO PHOSPHATE-SULFATE

Mesoporous zirconium oxo phosphate-sulfate was synthesized by hydrothermal method with hexadecyltrithylammonium bromide(CTAB)as the template and with zirconium nitrate or zirconium oxychloride as zirconium source.The optimum two-stage process was established, ^(31)P MAS NMR showed that the states of phosphate species were changed with further postsynthesis treatment by sulfate acid. The transformations of the structures at different temperatures from room temperature to 1173 K were investigated by XRD. ...

Functional zirconium phosphate nanosheets enabled transfer hydrogenolysis of aromatic ether bonds over a low usage of Ru nanocatalysts

Catalytic hydrogenolysis of aromatic ether bonds is a highly promising strategy for upgrading lignin into small-molecule chemicals,which relies on developing innovative heterogeneous catalysts with high activity.Herein,we designed porous zirconium phosphate nanosheet-supported Ru nanocatalysts(Ru/ZrPsheet)as the heterogeneous catalyst by a process combining ball milling and molten-salt(KNO_(3)).Very interestingly,the fabricated Ru/ZrPsheetshowed good catalytic performance on the transfer hydrogenolysis of various types of aromatic ether bonds contained in lignin,i.e.,4-O-5,a-O-4,β-O-4,and aryl-O-CH3,over a low Ru usage(<0.5 mol%)without using any acidic/basic additive.Detailed investigations indicated that the properties of Ru and the support were indispensable.The excellent activity of Ru/ZZrPsheetoriginated from the strong acidity and basicity of ZrPsheetand the higher electron density of metallic Ru0as well as the nanosheet structure of ZrPsheet.

Novel interface engineering of LDH-based materials on Mg alloy for efficient photocatalytic systems considering the geometrical linearity of condensed phosphates

This study presents a facile and rapid method for synthesizing novel Layered Double Hydroxide(LDH)nanoflakes,exploring their application as a photocatalyst,and investigating the influence of condensed phosphates'geometric linearity on their photocatalytic properties.Herein,the Mg O film,obtained by plasma electrolysis of AZ31 Mg alloys,was modified by growing an LDH film,which was further functionalized using cyclic sodium hexametaphosphate(CP)and linear sodium tripolyphosphate(LP).CP acted as an enhancer for flake spacing within the LDH structure,while LP changed flake dispersion and orientation.Consequently,CP@LDH demonstrated exceptional efficiency in heterogeneous photocatalysis,effectively degrading organic dyes like Methylene blue(MB),Congo red(CR),and Methyl orange(MO).The unique cyclic structure of CP likely enhances surface reactions and improves the catalyst's interaction with dye molecules.Furthermore,the condensed phosphate structure contributes to a higher surface area and reactivity in CP@LDH,leading to its superior photocatalytic performance compared to LP@LDH.Specifically,LP@LDH demonstrated notable degradation efficiencies of 93.02%,92.89%,and 88.81%for MB,MO,and CR respectively,over a 40 min duration.The highest degradation efficiencies were observed in the case of the CP@LDH sample,reporting 99.99%for MB,98.88%for CR,and 99.70%for MO.This underscores the potential of CP@LDH as a highly effective photocatalyst for organic dye degradation,offering promising prospects for environmental remediation and water detoxification applications.

In Vitro Cytotoxicity Evaluation of Highly Absorbent Foam Dressings Based on Silver Zirconium Phosphate via IC50 Value

In this study, we, for the first time, tried to apply IC50 values (inhibitory concentration estimated to affect the endpoint in question by 50%) in the MTT colorimetric assay to investigate the cytotoxic effects of highly absorbent foam dressings based on silver zirconium phosphate, a newly nano-based matrix. Our results showed that silver released from dressings based on silver zirconium phosphate attributed mainly to highly cytotoxic to L929 cells cultured with MEM containing 10% fetal bovine serum. In addition, we have also compared the IC50 values among different dilutions of AgNO3 solution, silver based dressing extracts and material reference control (ZDEC) extracts using the optimized MTT assay, along with characterizing the silver content in the dressing extracts using atomic absorption spectroscopy. Results have shown that the IC50 values of AgNO50 solution, silver based dressing extracts and ZDEC extracts are 3.5 μg/mL, 3.8 μg/mL and 8.4%, respectively. And there exist some good agreements between qualitative and quantitative evaluation method as well. In conclusion, our study has led to the view that the IC50 value is a promising quantitative index for screening cytotoxicity with regard to silver based dressings.

Effect of safety valve types on the gas venting behavior and thermal runaway hazard severity of large-format prismatic lithium iron phosphate batteries

The safety valve is an important component to ensure the safe operation of lithium-ion batteries(LIBs).However,the effect of safety valve type on the thermal runaway(TR)and gas venting behavior of LIBs,as well as the TR hazard severity of LIBs,are not known.In this paper,the TR and gas venting behavior of three 100 A h lithium iron phosphate(LFP)batteries with different safety valves are investigated under overheating.Compared to previous studies,the main contribution of this work is in studying and evaluating the effect of gas venting behavior and TR hazard severity of LFP batteries with three safety valve types.Two significant results are obtained:(Ⅰ)the safety valve type dominates over gas venting pressure of battery during safety venting,the maximum gas venting pressure of LFP batteries with a round safety valve is 3320 Pa,which is one order of magnitude higher than other batteries with oval or cavity safety valve;(Ⅱ)the LFP battery with oval safety valve has the lowest TR hazard as shown by the TR hazard assessment model based on gray-fuzzy analytic hierarchy process.This study reveals the effect of safety valve type on TR and gas venting,providing a clear direction for the safety valve design.

Incorporation of Nano-Zinc Oxide in Lamellar Zirconium Phosphate: Synthesis and Characterization

In order to provide ultraviolet barrier, antifungal and antibacterial properties, nano-zinc oxide (ZnO) was added to lamellar zirconium phosphate (ZrP). The phosphate was synthesized via reaction of zirconium oxychloride octahydrate and phosphoric acid following its chemical modification with Jeffamine and nano-ZnO. Diffractometric, morphological, thermal, structural and relaxometric evaluations were conducted. Fourier transform infrared spectroscopy (FTIR) revealed increase of the area between 4000 - 3000 cm-1 due to the formation of ionic specie PO? +NH3-[C-(H)(CH3)-CH2-O-(C-(H)(CH3)-CH2-O)8-(CH2-CH2-O-CH3)] and nano-ZnO particles. Wide-angle X-ray diffraction indicated that intercalation of Jeffamine was successful. Thermogravimetry confirmed that nano-ZnO particle forced the expulsion of Jeffamine outside ZrP galleries. Scanning electron microscopy evidenced the Jeffamine intercalation and sample heterogeneity. Hydrogen molecular relaxation indicated the increase of molecular rigidity owing to the formation of ionic specie and the addition of nano-ZnO particles. It was postulated that a multifunctional and miscellaneous material constituted by as prepared ZrP, some delaminated ZrP platelets and nano-ZnO particles was achieved. The material has potential for usage as filler in polymeric composites.

Electrochemical Analysis of Zirconiumin Aqueous and Organic Media

For the challenging nature of the zirconium environment analysis, this study consists to analyze the electrochemical behavior of Zirconium in both aqueous and organic media. To that end first the electrolytic media was selected on the basis of the Pourbaix potential-pH diagram, which provides informations on the predominance of Zr(IV) ion and Zr in aqueous media. In aqueous media, analyzes were first carried out in acidic media then in basic media. Studies have thus revealed that the acidic environment is not favourable for the electrochemical analysis of zirconium. Voltammograms obtained in an acidic environment show no zirconium detection signal;this is due to the strong presence of H+ ions in the solution. We have also observed in acidic media the phenomenon of passivation of the electrode surface. In aqueous alkaline media (pH = 13), we have drawn in reduction several Intensity-Potential curves by fixingsome technical parameterslike scanning speed, rotation speed of the electrode. The obtained voltammograms show cathodic waves, starting from -1.5 V/DHW and attributed to the reduction of Zr (IV) to Zr (0). The last phase of this study focused on the electrochemical analysis of zirconium in an organic media. In this media, several intensity-potential curves were plotted in reduction and in cyclic voltammetry with various parameters. Through several reduction analysis, the Zr (IV) was reduced to Zr (0) to the potential of -1.5 V/DHW. The electrochemical analysis of zirconium in organic media seems globally easier to achieve thanks to its large solvent window (i.e. dimethylformamide (DMF) solvent window > 6 V).

Integrated Effects of Phosphate Rock and Chemical Fertilizers on the Dynamics of Soil Bacterial in Acidic Rice Paddy Soils of Man (Ivory Coast)

In agricultural soils, phosphorus is often limited, leading farmers to employ artificial supplementation through both inorganic and organic fertilization methods due to its restricted availability. Soil fertilization has the potential to augment both the abundance and diversity of bacterial communities. Our study aimed to assess the effects of phosphate amendments, derived from natural phosphate rock, and chemical fertilizers (TSP, NPK), on the density and diversity of bacterial communities within the study plots. We developed and applied eight phosphate amendments during the initial cultivation cycle. Soil samples were collected post 1st and 2nd cultivation cycles, and the quantification of both total and cultivable phosphate-solubilizing bacteria (PSB) was conducted. Additionally, we analyzed bacterial community structure, α-diversity (Shannon Diversity Index, Evenness Index, Chao1 Index). The combination of natural phosphate rock (PR) and chemical fertilizers (TSP, NPK) significantly increased (p 7 bacteria/g dry soil) and phosphate-solubilizing bacteria (0.01 to 6.8 × 107 PSB/g dry soil) in comparison to unamended control soils. The diversity of bacterial phyla (Firmicutes, Actinobacteria, Proteobacteria, Halobacterota, Chloroflexia) observed under each treatment remained consistent regardless of the nature of the phosphate amendment applied. However, changes in the abundance of the bacterial phyla populations were observed as a function of the nature of the phosphate amendment or chemical fertilizer. It appears that the addition of excessive natural phosphate rock does not alter the number and the diversity of soil microorganisms population despite successive cultivation cycles. However, the addition of excessive chemical fertilizer reduces soil microorganisms density and structure after the 2nd cultivation cycle.

Phase-field simulations of the effect of temperature and interface for zirconiumδ-hydrides

Hydride precipitation in zirconium cladding materials can damage their integrity and durability.Service temperature and material defects have a significant effect on the dynamic growth of hydrides.In this study,we have developed a phasefield model based on the assumption of elastic behaviour within a specific temperature range(613 K-653 K).This model allows us to study the influence of temperature and interfacial effects on the morphology,stress,and average growth rate of zirconium hydride.The results suggest that changes in temperature and interfacial energy influence the length-to-thickness ratio and average growth rate of the hydride morphology.The ultimate determinant of hydride orientation is the loss of interfacial coherency,primarily induced by interfacial dislocation defects and quantifiable by the mismatch degree q.An escalation in interfacial coherency loss leads to a transition of hydride growth from horizontal to vertical,accompanied by the onset of redirection behaviour.Interestingly,redirection occurs at a critical mismatch level,denoted as qc,and remains unaffected by variations in temperature and interfacial energy.However,this redirection leads to an increase in the maximum stress,which may influence the direction of hydride crack propagation.This research highlights the importance of interfacial coherency and provides valuable insights into the morphology and growth kinetics of hydrides in zirconium alloys.

Differential roles of C-3 and C-6 phosphate monoesters in affecting potato starch properties

The effects of starch phosphate monoester content(SPC),namely C-3(C3P)and C-6 phosphate monoesters(C6P),on the starch properties were investigated using four potato starches with varied SPC/C3P/C6P and two nonphosphorylated maize starches with a similar range of amylose content(AC)as controls.The starch property results showed that a higher SPC is associated with lower turbidity,storage and loss modulus after storage,and water solubility,but higher swelling power(SP)and pasting viscosities.These findings suggested that SPC inhibited molecular rearrangement during storage and starch leaching during heating,and enhanced swelling and viscosities due to increased hydration and water uptake caused by the repulsion effect of phosphate groups and a less ordered crystalline structure.Increased SPC also resulted in lower resistant starch(RS)content in a native granular state but higher RS after retrogradation.Pearson correlations further indicated that SPC/C3P/C6P were positively correlated with peak(r^(2)=0.925,0.873 and 0.930,respectively),trough(r^(2)=0.994,0.968 and 0.988,respectively),and final viscosities(r^(2)=0.981,0.968 and 0.971,respectively).Notably,SPC,mainly C3P,exhibited a significantly positive correlation with SP(r^(2)=0.859)and setback viscosity(r^(2)=0.867),whereas SPC,mainly C6P,showed a weak positive correlation with RS after retrogradation(r^(2)=0.746).However,SPC had no significant correlations with water solubility,turbidity and rheology properties,which were more correlated with AC.These findings are helpful for the food industry to select potato starches with desired properties based on their contents of SPC,C3P,or C6P.