In high-energy flash radiography,scattered photons degrade the acquiring image,which limits the resolving power of interfaces and density of dense object.The application of large anti-scatter grid can reduce the scatt...In high-energy flash radiography,scattered photons degrade the acquiring image,which limits the resolving power of interfaces and density of dense object.The application of large anti-scatter grid can reduce the scattered photons remarkably,but this requires a stable source position in order to reduce the loss of signal photons in the grid structure.The pinhole imaging technique is applied to observe spatial jitters of a triple-pulse radiographic source of a linear induction accelerator.Numerical simulations are conducted to analyze the imaging performance with the same or close parameters of the pinhole object and experimental alignment.Experiments are carried out to observe spatial jitters of the source between different measurements.Deviations of the source position between different pulses are measured in each experiment.展开更多
针对LVDT在使用中重复性受外界因素影响的问题,进行了理论分析与软件仿真,认为LVDT的铁心受干扰时会产生径向跳动,从几何关系与磁场两方面使测量结果产生误差。文中设计了LVDT重复性测试系统,在LVDT量程范围内选取5、15、25 mm 3个测量...针对LVDT在使用中重复性受外界因素影响的问题,进行了理论分析与软件仿真,认为LVDT的铁心受干扰时会产生径向跳动,从几何关系与磁场两方面使测量结果产生误差。文中设计了LVDT重复性测试系统,在LVDT量程范围内选取5、15、25 mm 3个测量点进行测试,结果表明理论分析与实际测试具备良好的一致性。为提高LVDT的重复性,提出用精密直线轴承限制LVDT铁心的径向运动。优化后,5、15、25 mm处测量值的重复性标准差分别从0.07323、0.12633、0.15966 mm降低到0.03757、0.04868、0.04301 mm,测量值的离散程度明显减小,验证了优化方法的可行性和有效性。展开更多
文摘In high-energy flash radiography,scattered photons degrade the acquiring image,which limits the resolving power of interfaces and density of dense object.The application of large anti-scatter grid can reduce the scattered photons remarkably,but this requires a stable source position in order to reduce the loss of signal photons in the grid structure.The pinhole imaging technique is applied to observe spatial jitters of a triple-pulse radiographic source of a linear induction accelerator.Numerical simulations are conducted to analyze the imaging performance with the same or close parameters of the pinhole object and experimental alignment.Experiments are carried out to observe spatial jitters of the source between different measurements.Deviations of the source position between different pulses are measured in each experiment.
