Ceramic coating was deposited on TiAl alloy substrate by micro-arc oxidation(MAO)in a silicate-aluminate electrolyte solution with additives including sodium citrate,graphite and sodium tungstate.The microstructures a...Ceramic coating was deposited on TiAl alloy substrate by micro-arc oxidation(MAO)in a silicate-aluminate electrolyte solution with additives including sodium citrate,graphite and sodium tungstate.The microstructures and compositions were analyzed by SEM,EDX and XRD.The corrosion and wear properties of the coatings were investigated by potentiodynamic polarization and ball-on-disc wear test,respectively.The results show that the MAO coatings consist of WO3,Ti2O3,graphite and Al2O3 besides Al2TiO5 and Al2SiO5.With additives in the electrolyte,the working voltage at the micro-arc discharge stage decreases,and the ceramic coating gets smoother and more compact.The corrosion current density of MAO coating is much lower than that of TiAl substrate.It can be reduced from 9.81×10-8A/cm 2to 3.02×10-10A/cm 2 .The MAO coatings composed of hard Al2O3,WO3 and Ti2O3 obviously improve the wear resistance of TiAl alloy.The wear rate is-3.27×10-7g/(N·m).展开更多
A TiA1N coating was deposited on a heat resistant steel X12CrMoWVNbN10-1-1 by vacuum arc ion plating. The tensile and fatigue properties of the coated steel were investigated at room temperature (RT) and 650 ℃. The...A TiA1N coating was deposited on a heat resistant steel X12CrMoWVNbN10-1-1 by vacuum arc ion plating. The tensile and fatigue properties of the coated steel were investigated at room temperature (RT) and 650 ℃. The results reveal that the TiA1N coating is compact, on which a small number of large particle and pits are present. The Ti/Al atomic ratio in the coating is about 0.94. The average hardness of the coating is 1 868 HV0.1 and the interface bonding force between TiAIN coating and the substrate is about 3 l N. The elastic modulus and the strength of the steel are improved by the deposition of TiAIN coating. The influence of the TiA1N coating on the tensile properties of the steel can be ignored at both RT and 650 ℃. Moreover, there is no obvious decrease of the fatigue limit of substrate when the steel is coated by the coating at the investigated temperature.展开更多
The effect of coatings(Y_2O_3, Zr O_2 and Al_2O_3) on the interfacial reaction of Ti Al alloys was studied with molecular dynamics. The binding energy of coatings and the diffusion process of oxygen in the melt were s...The effect of coatings(Y_2O_3, Zr O_2 and Al_2O_3) on the interfacial reaction of Ti Al alloys was studied with molecular dynamics. The binding energy of coatings and the diffusion process of oxygen in the melt were simulated, and then the simulation results were compared with the experimental results. The simulation results indicate that for each of the three simulated coatings, inordinate interfacial reactions have occurred between the coating and the melt. The binding energy results show that Y_2O_3 has the best stability and is the most difficult to break down. Zr O_2 has the greatest decomposition energy and is the easiest to break down in the melt. Besides, the molecular dynamics indicate that the diffusion coefficient of the oxygen atom in Al_2O_3 is larger than that in the other two coatings, indicating that oxygen diffusion in Al_2O_3 is the fastest at a given temperature. The experimental results show that the oxygen concentration of the melt with Al_2O_3 coating is the highest, and the oxygen diffusion is of similar magnitude to the simulation values, from which the conclusion can be obtained that the oxygen concentration is significantly influenced by the coating materials.展开更多
The NiCrAlY+ZrO2 thermal barrier coating was prepared on the surface of TiAl alloy by plasma spraying technique. The microstructure and phase structure were analyzed using scanning electron microscopy(SEM) and X-ray d...The NiCrAlY+ZrO2 thermal barrier coating was prepared on the surface of TiAl alloy by plasma spraying technique. The microstructure and phase structure were analyzed using scanning electron microscopy(SEM) and X-ray diffractometry(XRD). The high temperature oxidation resistance of the plasma sprayed samples at 850℃ was investigated. The results show that the bonding between thermal barrier coating and substrate is very good. Surface hardness of TiAl alloy is improved too. The microhardness of the coating surface is about HV 900 after the oxidation test at 850 ℃ . The oxidation resistance of the samples is improved remarkably.展开更多
基金Project(2006KG03) supported by the Science and Technology Program of Shannxi Province, China
文摘Ceramic coating was deposited on TiAl alloy substrate by micro-arc oxidation(MAO)in a silicate-aluminate electrolyte solution with additives including sodium citrate,graphite and sodium tungstate.The microstructures and compositions were analyzed by SEM,EDX and XRD.The corrosion and wear properties of the coatings were investigated by potentiodynamic polarization and ball-on-disc wear test,respectively.The results show that the MAO coatings consist of WO3,Ti2O3,graphite and Al2O3 besides Al2TiO5 and Al2SiO5.With additives in the electrolyte,the working voltage at the micro-arc discharge stage decreases,and the ceramic coating gets smoother and more compact.The corrosion current density of MAO coating is much lower than that of TiAl substrate.It can be reduced from 9.81×10-8A/cm 2to 3.02×10-10A/cm 2 .The MAO coatings composed of hard Al2O3,WO3 and Ti2O3 obviously improve the wear resistance of TiAl alloy.The wear rate is-3.27×10-7g/(N·m).
基金Funded by National Science Foundation of China(No.51172182)the Program for New Century Excellent Talents in University(No.NCET-08-0460)the 111 Project(No.B08040)
文摘A TiA1N coating was deposited on a heat resistant steel X12CrMoWVNbN10-1-1 by vacuum arc ion plating. The tensile and fatigue properties of the coated steel were investigated at room temperature (RT) and 650 ℃. The results reveal that the TiA1N coating is compact, on which a small number of large particle and pits are present. The Ti/Al atomic ratio in the coating is about 0.94. The average hardness of the coating is 1 868 HV0.1 and the interface bonding force between TiAIN coating and the substrate is about 3 l N. The elastic modulus and the strength of the steel are improved by the deposition of TiAIN coating. The influence of the TiA1N coating on the tensile properties of the steel can be ignored at both RT and 650 ℃. Moreover, there is no obvious decrease of the fatigue limit of substrate when the steel is coated by the coating at the investigated temperature.
基金Projects(52161009,51961003)supported by the National Natural Science Foundation of ChinaProject(2022AAC03224)supported by the Natural Science Foundation of Ningxia,ChinaProject(XAB2022YW07)supported by the West Light Foundation of the Chinese Academy of Science。
基金financially supported by the National Natural Science Foundation of China(No.51304198)the Natural Science Foundation of Jiangsu Province,China(Nos.2013106,20141134 and 2014028-08)
文摘The effect of coatings(Y_2O_3, Zr O_2 and Al_2O_3) on the interfacial reaction of Ti Al alloys was studied with molecular dynamics. The binding energy of coatings and the diffusion process of oxygen in the melt were simulated, and then the simulation results were compared with the experimental results. The simulation results indicate that for each of the three simulated coatings, inordinate interfacial reactions have occurred between the coating and the melt. The binding energy results show that Y_2O_3 has the best stability and is the most difficult to break down. Zr O_2 has the greatest decomposition energy and is the easiest to break down in the melt. Besides, the molecular dynamics indicate that the diffusion coefficient of the oxygen atom in Al_2O_3 is larger than that in the other two coatings, indicating that oxygen diffusion in Al_2O_3 is the fastest at a given temperature. The experimental results show that the oxygen concentration of the melt with Al_2O_3 coating is the highest, and the oxygen diffusion is of similar magnitude to the simulation values, from which the conclusion can be obtained that the oxygen concentration is significantly influenced by the coating materials.
基金Project(20061D0500500151) supported by Beijing Excellent Talent Nurture and Sponsor Project
文摘The NiCrAlY+ZrO2 thermal barrier coating was prepared on the surface of TiAl alloy by plasma spraying technique. The microstructure and phase structure were analyzed using scanning electron microscopy(SEM) and X-ray diffractometry(XRD). The high temperature oxidation resistance of the plasma sprayed samples at 850℃ was investigated. The results show that the bonding between thermal barrier coating and substrate is very good. Surface hardness of TiAl alloy is improved too. The microhardness of the coating surface is about HV 900 after the oxidation test at 850 ℃ . The oxidation resistance of the samples is improved remarkably.