Comparison study on measurement of rail weld joint between inertial reference method and multi-point chord reference method

Purpose – Straightness measurement of rail weld joint is of essential importance to railway maintenance. Dueto the lack of efficient measurement equipment, there has been limited in-depth research on rail weld joint with a5-m wavelength range, leaving a significant knowledge gap in this field.Design/methodology/approach – In this study, the authors used the well-established inertial referencemethod (IR-method), and the state-of-the-art multi-point chord reference method (MCR-method). Two methodshave been applied in different types of rail straightness measurement trollies, respectively. These instrumentswere tested in a high-speed rail section within a certain region of China. The test results were ultimatelyvalidated through using traditional straightedge and feeler gauge methods as reference data to evaluate the railweld joint straightness within the 5-m wavelength range.Findings – The research reveals that IR-method and MCR-method produce reasonably similar measurementresults for wavelengths below 1 m. However, MCR-method outperforms IR-method in terms of accuracy forwavelengths exceeding 3 m. Furthermore, it was observed that IR-method, while operating at a slower speed,carries the risk of derailing and is incapable of detecting rail weld joints and low joints within the track.Originality/value – The research compare two methods’ measurement effects in a longer wavelength rangeand demonstrate the superiority of MCR-method.

Comparison of Methods for Estimating Reference Crop Evapotranspiration in Beijing

Based on the meteorological data from 1951 to 2015 in Beijing,the reference crop evapotranspiration(ET_0)in Beijing was estimated using the FAO 56 Penman-Monteith method,the FAO PPP-17 Penman method,the Hargreaves method,and the Priestley-Taylor method.The results showed that the monthly and annual changing trends of ET0 estimated by the four methods are basically the same.In general,the ET0 values estimated by the Hargreaves method are the closest to those of the standard method FAO 56 Penman-Monteith,while the difference between the FAO PPP-17 Penman method and the standard method is the biggest.The Hargreaves method is the most suitable method for the estimation of ET0 in Beijing.

Combination of terrestrial reference frames based on space geodetic techniques in SHAO:methodology and main issues

Based on years of input from the four geodetic techniques （SLR, GPS, VLBI and DORIS）, the strategies of the combination were studied in SHAO to generate a new global terrestrial reference frame as the material realization of the ITRS defined in IERS Conventions. The main input includes the time series of weekly solutions （or fortnightly for SLR 1983-1993） of observational data for satellite techniques and session-wise normal equations for VLBI. The set of estimated unknowns includes 3- dimensional Cartesian coordinates at the reference epoch 2005.0 of the stations distributed globally and their rates as well as the time series of consistent Earth Orientation Parameters （EOPs） at the same epochs as the input. Besides the final solution, namely SOL-2, generated by using all the inputs before 2015.0 obtained from short-term observation processing, another reference solution, namely SOL- 1, was also computed by using the input before 2009.0 based on the same combination of procedures for the purpose of comparison with ITRF2008 and DTRF2008 and for evaluating the effect of the latest six more years of data on the combined results. The estimated accuracy of the x-component and y-component of the SOL- 1 TRF-origin was better than 0.1 mm at epoch 2005.0 and better than 0.3 mm yr- 1 in time evolution, either compared with ITRF2008 or DTRF2008. However, the z-component of the translation parameters from SOL-1 to ITRF2008 and DTRF2008 were 3.4 mm and -1.0 ram, respectively. It seems that the z-component of the SOL-1 TRF-origin was much closer to the one in DTRF2008 than the one in ITRF2008. The translation parameters from SOL-2 to ITRF2014 were 2.2, -1.8 and 0.9 mm in the x-, y- and z-components respectively with rates smaller than 0.4 mmyr-1. Similarly, the scale factor transformed from SOL-1 to DTRF2008 was much smaller than that to ITRF2008. The scale parameter from SOL-2 to ITRF2014 was -0.31 ppb with a rate lower than 0.01 ppb yr-1. The external precision （WRMS） compared with IERS EOP 08 C04 of the combined EOP series was smaller than 0.06 mas for the polar motions, smaller than 0.01 ms for the UT1-UTC and smaller than 0.02 ms for the LODs. The precision of the EOPs in SOL-2 was slightly higher than that of SOL-1.

Fiber Bragg Grating Sensor Array System Based on Digital Phase Generated Carrier Demodulation and Reference Compensation Method

A novel fiber Bragg grating （FBG） sensor array system based on digital phase generated carrier （PGC） demodulation and reference compensation method is proposed and set up. Experimental results confirm that the digital PGC demodulation can be used for wavelength-division-multiplexed FBG sensor array and the reference compensation method can reduce the environmental interference by approximately 40 dB in the frequency range from 20 Hz to 2 kHz. The minimum detectable wavelength-shift of the sensor system is 1 × 10^-3 pm/Hz^1/2.

Comparison of Calculation Methods for Potential Reference Crop Evapotranspiration ET_0 in North Xinjiang

Reference crop evapotranspiration (ET_0) is a critical part in water cycle and water balance of ecosystem, which is greatly important to effective utilization of agricultural water resources and for making reasonable irrigation system. In order to propose a suitable method for computing ET_0 in North Xinjiang, based on daily meteorological data from May 1 to September30, 2010 provided by Weather Station of Fuhai County, we used FAO56 Penman-Monteith as the standard formula to compute ET_0, compared the differences and relations between such the method and other 4 calculation formulas, and analyzed the cause of the deviation, finally evaluated the applicability of computational method in North Xinjiang. The results showed that the calculation results by FA056 PM Method was approximate to that by FAO Penman method and IA method, of which the relative error was 9.26% and 13.51% respectively, the ET_0 results calculated by PT method and HS method were generally greater than the results by FAO56 PM, and their deviation was very obvious.

Development of A Reference Dose for BDE-47,99,and 209 Using Benchmark Dose Methods

Eleven recently completed toxicological studies were critically reviewed to identify toxicologically significant endpoints and dose-response information. Dose-response data were compiled and entered into the USEPA＇s benchmark dose software （BMDS） for calculation of a benchmark dose （BMD） and a benchmark dose low （BMDL）. After assessing 91 endpoints across the nine studies, a total of 23 of these endpoints were identified for BMD modeling, and BMDL estimates corresponding to various dose-response models were compiled for these separate endpoints. Thyroid, neurobehavior and reproductive endpoints for BDE-47, -99, -209 were quantitatively evaluated. According to methods and feature of each study, different uncertainty factor （UF） value was decided and subsequently reference doses （RfDs） were proposed. Consistent with USEPA, the lowest BMDLs of 2.10, 81.77, and 1698 I^g/kg were used to develop RfDs for BDE-47, -99, and -209, respectively. RfDs for BDE-99 and BDE-209 were comparable to EPA results, and however, RfD of BDE-47 was much lower than that of EPA, which may result from that reproductive/developmental proves to be more sensitive than neurobehavior for BDE-47 and the principal study uses very-low-dose exposure.

Quantum-Mechanical Information Content of Multiples Hartree-Fock Solutions. The Multi-Reference Hartree-Fock Configuration Interaction Method

The Hartree-Fock equation is non-linear and has, in principle, multiple solutions. The ωth HF extreme and its associated virtual spin-orbitals furnish an orthogonal base Bω of the full configuration interaction space. Although all Bω bases generate the same CI space, the corresponding configurations of each Bω base have distinct quantum-mechanical information contents. In previous works, we have introduced a multi-reference configuration interaction method, based on the multiple extremes of the Hartree-Fock problem. This method was applied to calculate the permanent electrical dipole and quadrupole moments of some small molecules using minimal and double, triple and polarized double-zeta bases. In all cases were possible, using a reduced number of configurations, to obtain dipole and quadrupole moments in close agreement with the experimental values and energies without compromising the energy of the state function. These results show the positive effect of the use of the multi-reference Hartree-Fock bases that allowed a better extraction of quantum mechanical information from the several Bω bases. But to extend these ideas for larger systems and atomic bases, it is necessary to develop criteria to build the multireference Hartree-Fock bases. In this project, we are beginning a study of the non-uniform distribution of quantum-mechanical information content of the Bω bases, searching identify the factors that allowed obtain the good results cited

Decreasing Reference Evapotranspiration in a Warming Climate-A Case of Changjiang (Yangtze) River Catchment During 1970-2000

This study deals with temporal trends in the Penman-Monteith reference evapotranspiration estimated from standard meteorological observations, observed pan evaporation, and four related meteorological variables during 1970-2000 in the Yangtze River catchment. Relative contributions of the four meteorological variables to changes in the reference evapotranspiration are quantified. The results show that both the reference evapotranspiration and the pan evaporation have significant decreasing trends in the upper, the middle as well as in the whole Changjiang （Yangtze） River catchment at the 5% significance level, while the air temperature shows a significant increasing trend. The decreasing trend detected in the reference evapotranspiration can be attributed to the significant decreasing trends in the net radiation and the wind speed.

Assessing Climate Change Impact on Future Reference Evapotranspiration Pattern of West Bengal, India

Considering the importance of reference evapotranspiration (RET) in agriculture, hydrology and meteorology, the research problem was taken to assess the RET during winter season under projected climatic situation of West Bengal, India. The Penman-Monteith method was used in the study as it is the most accurate method of estimating RET. However, validation of the output of the equation was done with the help of observed data set. The data analysis was carried out using NCAR Command Language (NCL). The result clearly shows that the reference ET of the study area will be increased in the tune of 13% to 32% in the year 2050 compared to present RET level. Analysis of actual rainfall data shows a decreasing trend of winter rainfall in the study region. The projected rainfall data also follows the same pattern. Thus, the combination of low rainfall and higher ET value will demand more irrigation requirement for winter crops in West Bengal. The temporal changes of RET on decadal basis and spatial variation of RET for each decade have been observed and discussed in the paper.

Preparation and Certification of a New Salvianolic Acid A Reference Material for Food and Drug Research

Salvianolic acid A(Sal A),a water-soluble ingredient in Danshen,has various biological activities.Sal A and its impurities have similar physical and chemical properties,as well as strong reducibility;therefore,they are difficult to prepare and purify.In this study,high-purity Sal A was obtained by purification of sephadex chromatography and preparative chromatography.Furthermore,HPLC-DAD tandem ECD and HPLC-DAD tandem MS methods were used for non-volatile organic impurity analysis,ICP-MS method was used for non-volatile inorganic impurities and mass balance method and quantitative nuclear magnetic resonance were employed to certify the product.The structures of Sal A and its relative impurities were validated by nuclear magnetic resonance spectroscopy and mass spectrometry,and their contents were quantified as well.Following the principles of ISO Guides 34:2009 and 35:2005,a Sal A reference material was certified,covering homogeneity studies,stability studies,characterization,and uncertainty estimations.

Prospective study of high geodetic resolution to future VGOS reference point determination

The fast slewing rate and wide band of the VLBI2010 Global Observing System(VGOS) telescopes are beneficial to procure more observations and to obtain VLBI reference points(RPs) of high precisions.Meanwhile, with the development of synchronous tracking of fixed targets on telescopes during the observing, the RPs also can be determined in near real time based on a frame defined by other techniques. These opportunities provide us a possibility to explore the high geodetic resolution of VGOS telescopes. We design a thermal variation in RP as true values, and schedule a synchronous session of VGOS and target point(TP) series observing. Then VGOS delays and TP series are simulated and solved via piecewise functions. The results show that the accuracy of vertical component of the RP could be determined at an accuracy of 0.5 ± 0.3 mm in an hour using TP series, whereas the vertical components of RP solved by using VGOS delay measurements have a greater uncertainty due to the random error in the simulated atmosphere and bad radio source sky coverage in a shorter time interval. Some details in the data processing and accuracy evaluation are also introduced.

THE PRINCIPLES OF LEAST ACTION OF VARIABLE MASS NONHOLONOMIC NONCONSERVATIVE SYSTEM IN NONINERTIAL REFERENCE FRAMES

This paper presents the generalized principles of least action of variable mass nonholonomic nonconservative system in noninertial reference frame, proves the equivalence between Holder form and Suslov form, and then obtains differential equations of motion of variable mass nonholonomic nonconservative system in noninertial reference frame.

Standardization in laboratory medicine: Adoption of common reference intervals to the Croatian population

Considering the fact that the results of laboratory tests provide useful information about the state of health of patients, determination of reference value is considered an intrinsic part in the development of laboratory medi-cine. There are still huge differences in the analytical methods used as well as in the associated reference intervals which could consequently significantly affect the proper assessment of patient health. In a constant effort to increase the quality of patients' care, there are numerous international initiatives for standardiza-tion and/or harmonization of laboratory diagnostics in order to achieve maximum comparability of laboratory test results and improve patient safety. Through the standardization and harmonization processes of analytical methods the ability to create unique reference intervals is achieved. Such reference intervals could be applied globally in all laboratories using methods traceable to the same reference measuring system and analysing the biological samples from the populations with similar socio-demographic and ethnic characteristics. In this review we outlined the results of the harmonization processes in Croatia in the field of population based reference intervals for clinically relevant blood and serum constituents which are in accordance with ongoing activity for worldwide standardization and harmonization based on traceability in laboratory medicine.

Temporal variations of reference evapotranspiration and controlling factors:Implications for climatic drought in karst areas

Variations in reference evapotranspiration(ET_(0)) and drought characteristics play a key role in the effect of climate change on water cycle and associated ecohydrological patterns.The accurate estimation of ET_(0) is still a challenge due to the lack of meteorological data and the heterogeneity of hydrological system.Although there is an increasing trend in extreme drought events with global climate change,the relationship between ET_(0) and aridity index in karst areas has been poorly studied.In this study,we used the Penman-Monteith method based on a long time series of meteorological data from 1951 to 2015 to calculate ET_(0)in a typical karst area,Guilin,Southwest China.The temporal variations in climate variables,ET_(0)and aridity index(AI)were analyzed with the Mann-Kendall trend test and linear regression to determine the climatic characteristics,associated controlling factors of ET_(0) variations,and further to estimate the relationship between ET_(0) and AI.We found that the mean,maximum and minimum temperatures had increased significantly during the 65-year study period,while sunshine duration,wind speed and relative humidity exhibited significant decreasing trends.The annual ET_(0) showed a significant decreasing trend at the rate of−8.02 mm/10a.However,significant increase in air temperature should have contributed to the enhancement of ET_(0),indicating an“evaporation paradox”.In comparison,AI showed a slightly declining trend of−0.0005/a during 1951-2015.The change in sunshine duration was the major factor causing the decrease in ET_(0),followed by wind speed.AI had a higher correlation with precipitation amount,indicating that the variations of AI was more dependent on precipitation,but not substantially dependent on the ET_(0).Although AI was not directly related to ET_(0),ET_(0)had a major contribution to seasonal AI changes.The seasonal variations of ET_(0)played a critical role in dryness/wetness changes to regulate water and energy supply,which can lead to seasonal droughts or water shortages in karst areas.Overall,these findings provide an important reference for the management of agricultural production and water resources,and have an important implication for drought in karst regions of China.

The Role of the American Oil Chemists’Society in World Trade——Quality Assurance Testing,Certified Reference Materials,and International Liaison Activities

The American Oil Chemists’ Society(AOCS) is a volunteer-led association. AOCS develops and publishes methods of analysis for fats, oils, proteins, surfactants, and related materials according to accepted international standards to ensure equitable trade practices on a global scale. AOCS Official Method development has been going on for over a hundred years. The founding vision of AOCS in 1909 was "an organization designed for the development and advancement of analytical methods for cottonseed products." AOCS Official Methods are essential to world trade and are used to confirm the value of billions of pounds of oilseed-based commodities and finished products each year. In addition, AOCS conducts proficiency testing, provides certified reference materials, and collaborates with other standards developers including the International Organization for Standardization(ISO) and the Codex Alimentarius Commission. AOCS serves as a professional scientific membership organization providing current and emerging information as well as disseminating research results in oils, fats, lipids, proteins, surfactants, and related materials. Several avenues are used, especially meetings, publications, interest groups, networking opportunities, and web presence. Many scientists, experts, and others engaged in working in these fields find their professional "home" in AOCS. The AOCS Technical Leadership Committee comprises some of the most experienced AOCS members and scientists. The AOCS Technical Services department staff relies on this committee for guidance on scientific matters and for advice in prioritizing the opportunities facing AOCS.

A new learning algorithm with reference-following variables

A learning algorithm is presented for the learning of neural networks, in which the learning trajectory is convergence without any over-learning by changing of topological construction of the algorithm near any local minimum points of learning error. Because the topological construction is not convergent for some functions by usual BP method near some local minimum points, there is an over-learning phenomenon. To avoid the over-learning phenomenon, reference-following variables are used to change the topological construction of this algorithm. The theoretical analysis and the simulation results indicate that the proposed method is simple and useful.

Priestley-Taylor与Penman法计算参照作物腾发量的结果比较

利用北京气象站 5 0年的气象资料 ,对两种常用的计算参照作物腾发量的公式—— Priestley-Taylor和 Penm an方法的计算结果进行了比较。年值序列比较显示 ,Priestley-Taylor结果远小于 Penm an结果 ,前者比后者低 15 %～ 3 1% ,两者最大相差 3 78.3 mm ,最小相差 15 0 .9mm ,多年平均相差 2 5 5 .9m m。对历年逐月序列分析显示 ,两种方法在 7、8月份的结果十分接近 ,没有显著差异 ,但其它月份均存在显著差异。造成这种显著差异的原因 ,既有降雨的影响 ,又有 Penm an中空气动力学项的影响 ,而后者的影响可能更大些。空气动力项与辐射项之比与两种方法的吻合程度呈显著负相关。该比值越大 ,两种方法的吻合程度越差 ;反之 ,吻合程度越好。

用Y-参比法测定发酵液中林可霉素的含量

研究发酵液中林可霉素的分光光度测定方法。根据分光光度法测定林可霉素的原理,研究林可霉素的测定影响因素和规律,得出最佳测定波长为380nm、络合反应时间为30min、浓度为0.02mol/L的络合剂PdCl2剂最佳用量为0.5ml、林可霉素浓度在20～300μg/ml范围内吸光度A与林可霉素浓度C有线性关系。根据Y-参比法,建立了测定发酵液中林可霉素的含量的有效方法。

旱作春玉米农田Priestley-Taylor模式参数的变化

Priestley-Taylor(PT)参考作物蒸散(ET0)估算模式系数(α)的本地化研究,对于确定水资源高效利用的半旱地农业生产措施及精准灌溉具有非常重要的意义。本文以FAO(1998)推荐的Penman-Monteith(PM)参考作物蒸散估算方法为标准,采用涡度相关技术并根据气象数据信息,监测半干旱气候条件下旱作春玉米农田尺度水、热交换传输过程,以分析Priestley-Taylor模式参数α的变化特征并确定其本地化估算参数值。结果表明,年时间尺度变化过程中高海拔半干旱气候条件下根据PT模式推荐系数α=1.26确定的参考作物蒸散量(ET0-PT1.26)估算值,在11月至来年4月份非作物生长季期间平均偏低21.2%,在5月至9月份旱作春玉米生育期内平均高于PM模式的参考作物蒸散量(ET0-PM)估算值5.5%,研究站点旱作春玉米生长季本地化适宜的PT模式系数α值为1.15±0.06。在季节变化过程中,旱作春玉米农田近正午时刻实际PT模式系数平均值呈单峰型变化趋势,春玉米抽雄抽穗开花期达到高峰,平均值为0.67±0.08,苗期最低,仅为0.26±0.13,全生育期平均值为0.50±0.21。若要在半干旱气候地区根据PT模式准确估算参考作物蒸散量,需进行PT模式参数的本地化研究。

Analogue correction method of errors and its application to numerical weather prediction

In this paper, an analogue correction method of errors （ACE） based on a complicated atmospheric model is further developed and applied to numerical weather prediction （NWP）. The analysis shows that the ACE can effectively reduce model errors by combining the statistical analogue method with the dynamical model together in order that the information of plenty of historical data is utilized in the current complicated NWP model, Furthermore, in the ACE, the differences of the similarities between different historical analogues and the current initial state are considered as the weights for estimating model errors. The results of daily, decad and monthly prediction experiments on a complicated T63 atmospheric model show that the performance of the ACE by correcting model errors based on the estimation of the errors of 4 historical analogue predictions is not only better than that of the scheme of only introducing the correction of the errors of every single analogue prediction, but is also better than that of the T63 model.