Porous structures of natural materials and bionic design

This investigation and morphology analysis of porous structure of some kinds of natural materials such as chicken eggshell, partridge eggshell, pig bone, and seeds of mung bean, soja, ginkgo, lotus seed, as well as the epidermis of apples, with SEM (Scanning Electronic Microscope) showed that natural structures’ pores can be classified into uniform pores, gradient pores and multi pores from the viewpoint of the distribution variation of pore density, size and geometry. Furthermore, an optimal design of porous bearings was for the first time developed based on the gradient configuration of natural materials. The bionic design of porous structures is predicted to be widely developed and applied in the fields of materials and mechanical engineering in the future.

Structural Bionic Design of Machine Tool Structures

A structural bionic design process is systematically presented for lightweight mechanical structures. By mimicking biological excellent structural principles, the stiffening ribs of a machining table and a moving column were redesigned for better load-bearing efficiency. Finite element method（FEM） simulation and model experiments were carried out for performance verification, which showed the increase of structural static and dynamic performance. Structural bionic offers a new solution to change conventional structures for high specific stiffness.

Bionic Design and Experimental Validation of a Robotic Airship Inspired by the Physalia physalis

The robotic airship is one of the most unique and promising green aircraft,however,as a“lighter-than-air aircraft”and“thermal aircraft”,its long-endurance flight has great difficulties in decreasing drag and controlling buoyancy and pressure under thermal effects.In this work,we reported a robotic airship inspired by the Physalia physalis,imitating its morphology,physiological structure,and biological behaviors.The hull is designed by imitating the morphology of the Physalia physalis,and the gasbags including a helium balloon,two ballonets,and a thermoregulation gasbag are designed by imitating the physiological structure and biological behaviors of the pneumatophore,bladder,and gland of the Physalia physalis,respectively.Experimental results show that the bionic airship has an increase of about 40%in lift-to-drag and decreases the pressure in helium balloon by 47.5%under thermal effects,and has better aerodynamic performances and thermoregulation performances than conventional airships.

Bionic lightweight design of limb leg units for hydraulic quadruped robots by additive manufacturing and topology optimization

Galloping cheetahs,climbing mountain goats,and load hauling horses all show desirable locomotion capability,which motivates the development of quadruped robots.Among various quadruped robots,hydraulically driven quadruped robots show great potential in unstructured environments due to their discrete landing positions and large payloads.As the most critical movement unit of a quadruped robot,the limb leg unit(LLU)directly affects movement speed and reliability,and requires a compact and lightweight design.Inspired by the dexterous skeleton–muscle systems of cheetahs and humans,this paper proposes a highly integrated bionic actuator system for a better dynamic performance of an LLU.We propose that a cylinder barrel with multiple element interfaces and internal smooth channels is realized using metal additive manufacturing,and hybrid lattice structures are introduced into the lightweight design of the piston rod.In addition,additive manufacturing and topology optimization are incorporated to reduce the redundant material of the structural parts of the LLU.The mechanical properties of the actuator system are verified by numerical simulation and experiments,and the power density of the actuators is far greater than that of cheetah muscle.The mass of the optimized LLU is reduced by 24.5%,and the optimized LLU shows better response time performance when given a step signal,and presents a good trajectory tracking ability with the increase in motion frequency.

Structural bionic design for high-speed machine tool working table based on distribution rules of leaf veins

High-speed machine tool working table restrains the machining accuracy and machining efficiency,so lightweight design of the table is an important issue.In nature,leaf has developed a plate structure that maximizes the surface-to-volume ratio.It can be seen as a plate structure stiffened by veins.Compared with a high-speed machine tool working table,leaf veins play a role of supporting part which is similar to that of stiffening ribs,and they can provide some new design ideas for lightweight design of the table.In this paper,distribution rules of leaf veins were investigated,and a structural bionic design for the table was achieved based on regulation of leaf veins.First,statistical analysis on geometric structure of leaf veins was carried out,and four distribution rules were obtained.Then,relevant mechanical models were developed and analyzed in finite element software.Based on the results from mechanical analysis on those relevant models,the four distribution rules were translated into the design rules and a structural bionic design for the working table was achieved.Both simulation and experimental verifications were carried out,and results showed that the average displacement of the working table was reduced by about 33.9%.

Bionic design and performance test of maize grain cleaning screen through earthworm motion characteristics

The maize mixture feeding with a large mass cannot be migrated backward rapidly along the planar reciprocating vibrating screen,and it is easy to accumulate in the front of the screen,which leads to the decrease of screening efficiency.Based on the reverse engineering technology,using the wavy geometry formed during the earthworm(Pheretima guillelmi)moving as a bionic prototype,a bionic screen was designed to make the maize mixture migrate backward rapidly in the front of the screen.The contour curve of earthworm’s head in an axial contracted state was extracted and fitted to obtain its equation.Based on the difference of concave position of the lower surface’s wavy geometry during the earthworm moving,the motion of the bionic screen was divided into four postures,and the conversion between different postures of the bionic screen was realized by the cam drive mechanism.The kinematics simulation of the bionic screen was carried out through ADAMS,and the displacement and velocity of the bionic screen were analyzed.When the feeding mass of the maize mixture was set at 5 kg/s,6 kg/s and 7 kg/s,the test results showed that the time of the maize mixture migrated(TOMMM)in the front of the bionic screen was shortened by 0.18 s,0.71 s,and 1.36 s,respectively,compared with that of planar reciprocating vibrating screen.The total screening time(TST)of the bionic screen was shortened by 1.28 s,1.33 s,and 1.53 s,respectively.The ability of the maize mixture to be migrated backward was improved.This study can provide a reference for the innovative design of the cleaning screen.

Design of A Bionic Spudcan and Analysis of Penetration and Extraction Performances for Jack-up Platform

The mechanisms of soil structure interaction have drawn much attention in the past years in the installation and operation of jack-up platform. A bionic spudcan produced by biomimetic of egg and snail shell is proposed, and the performance of the penetration and extraction are analyzed by numerical method. The geometric contour of egg and snail shell is measured, and its mathematical model is established respectively. According to the structure of existing spudcan of jack-up platform, three kinds of typical biomimetic spudcan are designed. Furthermore, numerical analysis models of biomimetic spudcan are established respectively to study the soil structure interaction mechanism in the process of penetration and extraction, and contrastive analysis of resistance characteristics are carried out. To conclude, the results show that the biomimetic spudcan facilitates the platform installation, and it is also beneficial to the improvement of the bearing capacity of spudcan.

Design Principles of the Non-smooth Surface of Bionic Plow Moldboard

The diverse non-smooth body surfaces to reduce soil adhesion are the evolutional results for the soil animals to fit the adhesive and wet environment and can be used as a biological basis for the design of bionic plow moldboard. The model surfaces for bionic simulation should be taken from soil animal digging organs, on which the soil motion is similar to what is on the surface of moldboard. By analyzing the distribution of non-smooth units on the body surface of the ground beetle jaw and the soil moving stresses, the design principles of the bionic moldboard for the local and the whole moldboard were presented respectively. As well, the effect of soil moving speed on reducing adhesion, the dimensions relationship between soil particles and non-smooth convexes, the relationship between the enveloping surface of non-smooth convexes and the initial smooth surface of the plow body, and the convex types of the sphere coronal and the pangolin scales,etc.were discussed.

Lightweight Design and Verification of Gantry Machining Center Crossbeam Based on Structural Bionics

The lightweight and high efficiency of natural structures are the inexhaustible sources for engineering improvements. The goal of the study is to find innovative solutions for mechanical lightweight design through the application of structural bionic approaches. Giant waterlily leaf ribs and cactus stem are investigated for their optimal framework and superior performance. Their structural characteristics are extracted and used in the bio-inspired design of Lin MC6000 gantry machining center crossbeam. By mimicking analogous network structure, the bionic model is established, which has better load-carrying capacity than conventional distribution. Finite Element Method （FEM） is used for numerical simulation. Results show better specific stiffness of the bionic model, which is increased by 17.36%. Finally the scaled models are fabricated by precision casting for static and dynamic tests. The physical experiments are compared to numerical simulation. The results show that the maximum static deformation of the bionic model is reduced by about 16.22%, with 3.31% weight reduction. In addition, the first four natural frequencies are improved obviously. The structural bionic design is a valuable reference for updating conventional mechanical structures with better performance and less material consumption.

The Lightweight Design of Low RCS Pylon Based on Structural Bionics

A concept of Specific Structure Efficiency (SSE) was proposed that can be used in the lightweight effect evaluation ofstructures.The main procedures of bionic structure design were introduced systematically.The parameter relationship betweenhollow stem of plant and the minimum weight was deduced in detail.In order to improve SSE of pylons, the structural characteristicsof hollow stem were investigated and extracted.Bionic pylon was designed based on analogous biological structuralcharacteristics.Using finite element method based simulation, the displacements and stresses in the bionic pylon were comparedwith those of the conventional pylon.Results show that the SSE of bionic pylon is improved obviously.Static, dynamic andelectromagnetism tests were carried out on conventional and bionic pylons.The weight, stress, displacement and Radar CrossSection (RCS) of both pylons were measured.Experimental results illustrate that the SSE of bionic pylon is markedly improvedthat specific strength efficiency and specific stiffness efficiency of bionic pylon are increased by 52.9% and 43.6% respectively.The RCS of bionic pylon is reduced significantly.

Elastic Buckling of Bionic Cylindrical Shells Based on Bamboo

High load-bearing efficiency is one of the advantages of biological structures after the evolution of billions of years. Biomimicking from nature may offer the potential for lightweight design. In the viewpoint ofrnechanics properties, the culm of bamboo comprises of two types of cells and the number of the vascular bundles takes a gradient of distribution. A three-point bending test was carried out to measure the elastic modulus. Results show that the elastic modulus of bamboo decreases gradually from the periphery towards the centre. Based on the structural characteristics of bamboo, a bionic cylindrical structure was designed to mimic the gradient distribution of vascular bundles and parenchyma cells. The buckling resistance of the bionic structure was compared with that of a traditional shell of equal mass under axial pressure by finite element simulations. Results show that the load-bearing capacity of bionic shell is increased by 124.8%. The buckling mode of bionic structure is global buckling while that of the conventional shell is local buckling.

TOPOLOGY DESIGN OPTIMIZATION BASED ON BIOTIC BRANCH NET

The biotic branch nets are extreme high-tech product. In order to achieve acertain functional objective, they can adjust their growth direction and growth velocity byaccording to the varying growth environment. An innovative and effective methodology of topologydesign optimization based on the growth mechanism of biotic branch nets is suggested, and it isapplied to a layout design problem of a conductive cooling channel in a heat transfer system. Theeffectiveness of the method is validated by the FEM analysis.

Improving the design of reinforcing frames by simulating the arch and peltate venation structures

Based on the analyses on arch and peltate venation structures, the design of reinforcing frames was improved. First, distribution rules of the arch structure were summarized. According to the load condition and the structure of the frame, a mechanical model of arch structure was devel- oped, and two solutions for the model were analyzed and compared with each other. Through the a- nalysis, application rules of arch structure for improving the design were obtained. Then, distribu- tion rules of peltate venation structure were summarized. By using the same method, application rules of peltate venation structure for improving the design were also obtained. Finally, mechanical problem of the frame was described, and rib arrangement of the frame was redesigned. A parameter optimization for the widths of ribs in bionic arrangement was also carried out to accomplish the im- proving design. Comparison between bionic and conventional reinforcing frames shows that the weight is reduced by as much as 15.3%.

Gas-solid Erosion on Bionic Configuration Surface

A three levels orthogonal table-L9（34） was used,namely,impact angle,rotating speed,erodent size,and surface configuration were considered.The three bionic surface configurations are pit,groove,and ring.The experimental results indicate the experiment factors affecting erosive rate are,in their sequence of contribution,erodent size,impact angle,configuration,and rotating speed;the erosive rate increased with increase in rotating speed,erodent size;the erosion resistance of the sample with ring structure is higher than that of the other two samples.Based on this result,regression orthogonal experiment was carried out to select the optimal erosion resistance condition with respect to the ring bionic surface configuration.Regression equations between erosive rate and experimental factors of ring surface configurations were obtained.

Development of Bionic UAVs Cluster Technology

With the wider use of UAV in various fields,the raising task complexity and the increasing environmental uncertainties,the higher requirements for UAV technology are put forward.The bionic UAV cluster system has the potential advantages of good stealth performance,strong environmental adaptability,wide expansion of task and high operational efficiency.It has excellent prospects in future information warfare,electronic warfare and conventional combat field.By reviewing the development of bionic UAV cluster technology,this paper summarizes and analyzes the latest research progresses of the key technologies such as aerodynamic mechanism and aerodynamic configuration design,driving mechanism design,autonomous flight control,adaptive networking and cluster control of bionic aircrafts.

可持续理念下藤编家具形态仿生设计研究

目的为进一步提升产品的可持续性应用价值,提出了可持续理念下产品形态仿生设计路径,以藤家具为研究对象,探寻藤编家具的可持续设计创新。方法首先,采用文献研究与田野调查相结合的方法,梳理国内外藤编家具的设计研究现状,总结藤编家具行业的现存问题;其次,利用问卷调研法确定用户需求及仿生对象,借助AHP(层次分析法)决策分析原理选择最佳的仿生设计元素,并应用可持续设计策略对藤编家具进行设计创新;最后,采用LCA(生命周期评价)进行设计方案的可持续性评估,确定了综合水平高的方案。结论通过构建可持续理念下产品形态仿生设计路径,提出产品领域应用的可持续设计策略,并应用于藤编家具设计实践,结合用户调查和专家打分,从元素提取、方案设计和方案评估三个方面验证路径的可行性及有效性,为藤编家具的可持续创新提供新思路。

Study of the Ballistic Impact Behavior of Protective Multi-Layer Composite Armor

The abalone shell,a composite material whose cross-section is composed of inorganic and organic layers,has high strength and toughness.Inspired by the abalone shell,several multi-layer composite plates with different layer sequences and thicknesses are studied as bullet-proof material in this paper.To investigate the ballistic performance of this multi-layer structure,the complete characterization model and related material parameters of large deformation,failure and fracture ofAl_(2)O_(3)ceramics andCarbon Fiber Reinforced Polymer(CFRP)are studied.Then,3D finite element models of the proposed composite plates with different layer sequences and thicknesses impacted by a 12.7 mm armor-piercing incendiary(API)are built using Abaqus to predict failure.The simulation results show that the CFRP/Al2O3 ceramic/Ultrahigh Molecular Weight Polyethylene(UHMWPE)/CFRP(1 mm/4 mm/4 mm/1 mm)composite is the optimized stack of layers.The simulation results under specified layer sequence and thickness have a reasonable correlation with the experimental results and reflect the failure and fracture of the multi-layer composite protective armor.

Battlefield target intelligence system architecture modeling and system optimization

To address the current problems of poor generality,low real-time,and imperfect information transmission of the battlefield target intelligence system,this paper studies the battlefield target intelligence system from the top-level perspective of multi-service joint warfare.First,an overall planning and analysis method of architecture modeling is proposed with the idea of a bionic analogy for battlefield target intelligence system architecture modeling,which reduces the difficulty of the planning and design process.The method introduces the Department of Defense architecture framework(DoDAF)modeling method,the multi-living agent(MLA)theory modeling method,and other combinations for planning and modeling.A set of rapid planning methods that can be applied to model the architecture of various types of complex systems is formed.Further,the liveness analysis of the battlefield target intelligence system is carried out,and the problems of the existing system are presented from several aspects.And the technical prediction of the development and construction is given,which provides directional ideas for the subsequent research and development of the battlefield target intelligence system.In the end,the proposed architecture model of the battlefield target intelligence system is simulated and verified by applying the colored Petri nets(CPN)simulation software.The analysis demonstrates the reasonable integrity of its logic.

旋翼无人机仿生栖息机械臂设计

为满足旋翼无人机执行林区内定点监测、侦查等任务,通过对鸟类栖息过程研究及腿足仿生研究,设计一种仿生栖息机械臂。对整机进行模块化设计及运动学分析,腿部模块使用机械系统动力学自动分析(Automatic Dynamic Analysis of Mechanical Systems,ADAMS)进行运动学轨迹仿真,爪部模块使用D-H(Denavit-Hartenberg)参数法取得趾尖运动学方程,通过MATLAB仿真得到爪部模块趾尖的工作空间点云分布。制作样机搭建试验系统,分别对趾部活动范围以及整机栖息能力进行试验验证。该设计结构简单,易操控,可完成试验室阶段的栖息行为。

刚性扑动仿生蝠鲼鱼的设计

蝠鲼鱼通过胸鳍摆动,在低速条件下具有良好的操纵性和稳定性。对蝠鲼鱼胸鳍刚性摆动时的水动力学性能进行仿真分析,得到蝠鲼鱼胸鳍刚性扑动最佳参数,同时得到最大推进因数。在此基础上,对刚性扑动仿生蝠鲼鱼的结构和控制系统进行设计,并进行样机研制。通过仿真与样机试验对比,验证刚性扑动仿生蝠鲼鱼设计的合理性,运行效果良好。