Multiple mixed state variable incremental integration for reconstructing extreme multistability in a novel memristive hyperchaotic jerk system with multiple cubic nonlinearity

Memristor-based chaotic systems with infinite equilibria are interesting because they generate extreme multistability.Their initial state-dependent dynamics can be explained in a reduced-dimension model by converting the incremental integration of the state variables into system parameters.However,this approach cannot solve memristive systems in the presence of nonlinear terms other than the memristor term.In addition,the converted state variables may suffer from a degree of divergence.To allow simpler mechanistic analysis and physical implementation of extreme multistability phenomena,this paper uses a multiple mixed state variable incremental integration(MMSVII)method,which successfully reconstructs a four-dimensional hyperchaotic jerk system with multiple cubic nonlinearities except for the memristor term in a three-dimensional model using a clever linear state variable mapping that eliminates the divergence of the state variables.Finally,the simulation circuit of the reduced-dimension system is constructed using Multisim simulation software and the simulation results are consistent with the MATLAB numerical simulation results.The results show that the method of MMSVII proposed in this paper is useful for analyzing extreme multistable systems with multiple higher-order nonlinear terms.

Quasi-anti-parity–time-symmetric single-resonator micro-optical gyroscope with Kerr nonlinearity

Parity–time(PT) and quasi-anti-parity–time(quasi-APT) symmetric optical gyroscopes have been proposed recently which enhance Sagnac frequency splitting. However, the operation of gyroscopes at the exceptional point(EP) is challenging due to strict fabrication requirements and experimental uncertainties. We propose a new quasi-APT-symmetric micro-optical gyroscope which can be operated at the EP by easily shifting the Kerr nonlinearity. A single resonator is used as the core sensitive component of the quasi-APT-symmetric optical gyroscope to reduce the size, overcome the strict structural requirements and detect small rotation rates. Moreover, the proposed scheme also has an easy readout method for the frequency splitting. As a result, the device achieves a frequency splitting 10~5 times higher than that of a classical resonant optical gyroscope with the Earth's rotation. This proposal paves the way for a new and valuable method for the engineering of micro-optical gyroscopes.

Effect of Wave Nonlinearity on the Instantaneous Seabed Liquefaction

The nonlinear variation of wave is commonly seen in nearshore area,and the resulting seabed response and liquefaction are of high concern to coastal engineers.In this study,an analytical formula considering the nonlinear wave skewness and asymmetry is adopted to provide wave pressure on the seabed surface.The liquefaction depth attenuation coefficient and width growth coefficient are defined to quantitatively characterize the nonlinear effect of wave on seabed liquefaction.Based on the 2D full dynamic model of wave-induced seabed response,a detailed parametric study is carried out in order to evaluate the influence of the nonlinear variation of wave loadings on seabed liquefaction.Further,new empirical prediction formulas are proposed to fast predict the maximum liquefaction under nonlinear wave.Results indicate that(1)Due to the influence of wave nonlinearity,the vertical transmission of negative pore water pressure in the seabed is hindered,and therefore,the amplitude decreases significantly.(2)In general,with the increase of wave nonlinearity,the liquefaction depth of seabed decreases gradually.Especially under asymmetric and skewed wave loading,the attenuation of maximum seabed liquefaction depth is the most significant among all the nonlinear wave conditions.However,highly skewed wave can cause the liquefaction depth of seabed greater than that under linear wave.(3)The asymmetry of wave pressure leads to the increase of liquefaction width,whereas the influence of skewedness is not significant.(4)Compared with the nonlinear waveform,seabed liquefaction is more sensitive to the variation of nonlinear degree of wave loading.

Nonlinear wave propagation in acoustic metamaterials with bilinear nonlinearity

Nonlinear phononic crystals have attracted great interest because of their unique properties absent in linear phononic crystals.However,few researches have considered the bilinear nonlinearity as well as its consequences in acoustic metamaterials.Hence,we introduce bilinear nonlinearity into acoustic metamaterials,and investigate the propagation behaviors of the fundamental and the second harmonic waves in the nonlinear acoustic metamaterials by discretization method,revealing the influence of the system parameters.Furthermore,we investigate the influence of partially periodic nonlinear acoustic metamaterials on the second harmonic wave propagation,and the results suggest that pass-band and band-gap can be transformed into each other under certain conditions.Our findings could be beneficial to the band gap control in nonlinear acoustic metamaterials.

Energy shift and subharmonics induced by nonlinearity in a quantum dot system

The presence of anticrossings induced by coupling between two states causes curvature in energy levels, yielding a nonlinearity in the quantum system. When the system is driven back and forth along the bending energy levels, subharmonic transitions and energy shifts can be observed, which would cause a significant influence as the system is applied to quantum computing. In this paper, we study a longitudinally driven singlet-triplet(ST) system in a double quantum dot(DQD)system, and illustrate the consequences of nonlinearity by driving the system close to the anticrossings. We provide a straightforward theory to quantitatively describe the energy shift and subharmonics caused by nonlinearity, and find good agreement between our theoretical result and the numerical simulation. Our results reveal the existence of nonlinearity in the vicinity of anticrossings and provide a direct way of analytically assessing its impact, which can be applied to other quantum systems without excessive labor.

Reliability analysis of circular concrete-filled steel tube with material and geometrical nonlinearity

Most of the previous research on concrete-filled steel tube is restricted to a deterministic approach. To gain clear insight into the random properties of circular concrete-filled steel tube, reliability analysis is carried out in the present study. To obtain the Structural nonlinear response and ultimate resistance capacity, material and geometrical nonlinear analysis of circular concrete-filled steel tube is performed with a three-dimensional degenerated beam ele- ment. Then we investigate the reliability of concrete-filled steel tube using the first-order reliability method combined with nonlinear finite element analysis. The influences of such parameters as material strength, slenderness, initial geo- metrical imperfection, etc. on the reliability of circular concrete-filled steel tube column are studied. It can be con- cluded that inevitable random fluctuation of those parameters has significant influence on structural reliability, and that stochastic or reliability methods can provide a more rational and subjective evaluation on the safety of CFT structures than a deterministic approach.

Design of photonic crystal fiber with elliptical air-holes to achieve simultaneous high birefringence and nonlinearity

A new type of V-shaped photonic crystal fiber with elliptical air-holes is proposed to realize simultaneous high bire- fringence and nonlinearity at a wavelength of 1.55 μm. The full vector finite element method was adopted to investigate its characteristics, including birefringence, nonlinearity, and dispersion. The PCF exhibited a very high birefringence of 2.89x10-2 and very high nonlinear coefficient of 102.69 W-1 .km 1. In particular, there were two zero-dispersion wave- lengths （ZDWs） in the visible （X： 640-720 nm and Y： 730-760 nm） and near-infrared regions （X： 1050-1606 nm and Y： 850-1500 nm）. The combination of high birefringence and nonlinearity allowed the PCF to maintain the polarization state and generate a broadband super continuum, with potential applications in nonlinear optics.

Bifurcation and chaos analysis for aeroelastic airfoil with freeplay structural nonlinearity in pitch

The dynamics character of a two degree-of-freedom aeroelastic airfoil with combined freeplay and cubic stiffness nonlinearities in pitch submitted to supersonic and hypersonic flow has been gaining significant attention. The Poincare mapping method and Floquet theory are adopted to analyse the limit cycle oscillation flutter and chaotic motion of this system. The result shows that the limit cycle oscillation flutter can be accurately predicted by the Floquet multiplier. The phase trajectories of both the pitch and plunge motion are obtained and the results show that the plunge motion is much more complex than the pitch motion. It is also proved that initial conditions have important influences on the dynamics character of the airfoil system. In a certain range of airspeed and with the same system parameters, the stable limit cycle oscillation, chaotic and multi-periodic motions can be detected under different initial conditions. The figure of the Poincare section also approves the previous conclusion.

Performance enhancement of wing-based piezoaeroelastic energy harvesting through freeplay nonlinearity

We investigate experimentally how controlled freeplay nonlinearity affects harvesting energy from a wing-based piezoaeroelastic energy harvesting system. This system consisits of a rigid airfoil which is supported by a nonlinear torsional spring （freeplay） in the pitch degree of freedom and a linear fiexural spring in the plunge degree of freedom. By attaching a piezoelectric material （PSI-5A4E） to the plunge degree of freedom, we can convert aeroelastic vibrations to electrical energy. The focus of this study is placed on the effects of the freeplay nonlinearity gap on the behavior of the harvester in terms of cut-in speed and level of harvested power. Although the freeplay nonlinearity may result in subcritical Hopf bifurcations （catastrophic for real aircrafts）, harvesting energy at low wind speeds is beneficial for designing piezoaeroelastic systems. It is demonstrated that increasing the freeplay nonlinearity gap can decrease the cut-in speed through a subcritical instability and gives the possibility to harvest energy at low wind speeds. The results also demonstrate that an optimum value of the load resistance exists, at which the level of the harvested power is maximized.

Nonlinearity Modulating Intensities and Spatial Structures of Central Pacific and Eastern Pacific El Nio Events

This paper compares data from linearized and nonlinear Zebiak-Cane model, as constrained by observed sea surface temperature anomaly （SSTA）, in simulating central Pacific （CP） and eastern Pacific （EP） E1 Nino. The difference between the temperature advections （determined by subtracting those of the linearized model from those of the nonlinear model）, referred to here as the nonlinearly induced temperature advection change （NTA）, is analyzed. The results demonstrate that the NTA records warming in the central equatorial Pacific during CP E1 Nino and makes fewer contributions to the structural distinctions of the CP E1 Nino, whereas it records warming in the eastern equatorial Pacific during EP E1 Nino, and thus significantly promotes EP E1 Nino during E1 Nino-type selection. The NTA for CP and EP E1 Nino varies in its amplitude, and is smaller in CP E1 Nino than it is in EP E1 Nino. These results demonstrate that CP E1 Nino are weakly modulated by small intensities of NTA, and may be controlled by weak nonlinearity; whereas, EP E1 Nino are significantly enhanced by large amplitudes of NTA, and are therefore likely to be modulated by relatively strong nonlinearity. These data could explain why CP E1 Nino are weaker than EP E1 Nino. Because the NTA for CP and EP E1 Nino differs in spatial structures and intensities, as well as their roles within different E1 Nino modes, the diversity of E1 Nino may be closely related to changes in the nonlinear characteristics of the tropical Pacific.

ON THE CAUCHY PROBLEM FOR A REACTION-DIFFUSION SYSTEM WITH SINGULAR NONLINEARITY

We consider the growth rate and quenching rate of the following problem with singular nonlinearityfor some positive constants b：, b2 （see Theorem 3.3 for the parametersfor some constantsHence, the solution （u, v） quenches at the originx = 0 at the same time ＇1＇ （see Theorem 4.3）. We also tind various other conditions tor the solution to quench in a finite time and obtain the corresponding decay rate of the solution near the quenching time.

Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy

The acoustic nonlinearity of surface waves is studied to evaluate plastic deformation in aluminum alloys.A narrow-band surface wave is successfully generated by a pulsed Nd-YAG laser system consisting of a beam expander and a slit mask.Various degrees of tensile deformation are induced by interrupting the tensile tests so as to obtain aluminum specimens with different degrees of plastic damage.The normalized acoustic nonlinearity increases as a function of tensile strain.The experimental results show that the acoustic nonlinearity of a laser-generated surface wave has a good correlation with the level of tensile deformation and has a potential to evaluate microdamage induced by dislocation microplasticity.

Ultrafast Third-Order Optical Nonlinearity of Organic Solvents Investigated by Subpicosecond Transient Optical Kerr Effect

A femtosecond optical Kerr effect experiment has been used to study the dynamic process of third-order optical nonlinearity for organic solvents acetone,acetonitrile,alcohol,benzene,chloroform,dichlomathane,dimenthyl-sulfoxande,dioxane,ethanol,and methanol,etc.The nonlinear refractive index for the solvents at femtosecond time scale was measured.

A nearly deterministic scheme for generation of multiphoton GHZ states with weak cross-Kerr nonlinearity

We propose a scheme to generate polarization-entangled multiphoton Greenberger-Horne^Zeilinger （GHZ） states based on weak cross-Kerr nonlinearity and subsequent homodyne measurement. It can also be generalized to produce maximally N-qubit entangled states. The success probabilities of our schemes are almost equal to 1.

Energy exchange between (3+1)D colliding spatiotemporal optical solitons in dispersive media with cubic-quintic nonlinearity

We investigate the energy exchange between （3＋1）D colliding spatiotemporal solitons （STSs） in dispersive media with cubic-quintic （CQ） nonlinearity by numerical simulations. Energy exchange between two （3＋1）D head on colliding STSs caused by their phase difference is observed, just as occurring in other optical media. Moreover, energy exchange between two head-on colliding STSs with different speeds is firstly shown in the CQ and saturable media. This phenomenon, we believe, may arouse some interest in the future studies of soliton collision in optical media.

A Boussinesq model with alleviated nonlinearity and dispersion

The classical Boussinesq equation is a weakly nonlinear and weakly dispersive equation, which has been widely applied to simulate wave propagation in off-coast shallow waters. A new form of the Boussinesq model for an uneven bottoms is derived in this paper. In the new model, nonlinearity is reduced without increasing the order of the highest derivative in the differential equations. Dispersion relationship of the model is improved to the order of Pade （2,2） by adjusting a parameter in the model based on the long wave approximation. Analysis of the linear dispersion, linear shoaling and nonlinearity of the present model shows that the performances in terms of nonlinearity, dispersion and shoaling of this model are improved. Numerical results obtained with the present model are in agreement with experimental data.

PREPARATION AND SECOND-ORDER OPTICAL NONLINEARITY OF NOVEL PHENOXYSILICON NETWORKS BY SOL-GEL PROCESS

Four phenoxysilicon networks for nonlinear optical (NLO) applications were designed and prepared by an extended sol-gel process without additional H2O and catalyst. All poled polymer network films possess high second-order nonlinear optical coefficients (d(33)) Of 10(-7)similar to 10(-8) esu. The investigation of NLO temporal stability at room temperature and elevated temperature (120 degreesC) indicated that these films exhibit high d(33) stability because the orientation of the chromophores are locked in the phenoxysilicon organic/inorganic networks.

Modulational instability of incoherently coupled beams in azobenzene-containing polymer with photoisomerization nonlinearity

The modulational instability of two incoherently coupled beams in azobenzene-containing polymer with photoisomerization nonlinearity is investigated analytically and numerically. Our results show that as a precursor to spatial optical soliton formation, modulational instability can be adjusted and controlled by the wavelength combinations of the signal and background beams. We also discuss the dependences of strength of modulational instability on intensities of two signal beams and background beam. These findings make it possible to predict the formation of incoherently coupled soliton pairs in azobenzene-containing polymer.

Parameter estimation for dual-rate sampled Hammerstein systems with dead-zone nonlinearity

The identification of nonlinear systems with multiple sampled rates is a difficult task.The motivation of our paper is to study the parameter estimation problem of Hammerstein systems with dead-zone characteristics by using the dual-rate sampled data.Firstly,the auxiliary model identification principle is used to estimate the unmeasurable variables,and the recursive estimation algorithm is proposed to identify the parameters of the static nonlinear model with the dead-zone function and the parameters of the dynamic linear system model.Then,the convergence of the proposed identification algorithm is analyzed by using the martingale convergence theorem.It is proved theoretically that the estimated parameters can converge to the real values under the condition of continuous excitation.Finally,the validity of the proposed algorithm is proved by the identification of the dual-rate sampled nonlinear systems.

Nonlinearity analysis of piezoelectric micromachined ultrasonic transducers based on couple stress theory

This paper studies the static deformation behavior of a piezoelectric micromachined ultrasonic transducer （PMUT） actuated by a strong external electric field. The transducer membrane consists of a piezoelectric layer, a passive layer and two electrode layers. The nonlinearities of the piezoelectric layer caused by electrostriction under a strong electric field are analyzed. Because the thickness of the transducer membrane is on the microscale, the size dependence of the deformation behavior is evaluated using the couple stress theory. The results show that the optimal ratio of the top electrode diameter and the membrane diameter is around 0.674. It is also found that this optimal value does not depend on any other parameters if the thicknesses of the two electrodes are negligible compared with those of the piezo- electric and passive layers. In addition, the nonlinearities of the piezoelectric layer will become stronger along with the increase of the electric field, which means that softening of the membrane stiffness occurs when a strong external electric field is applied. Meanwhile, the optimal thickness ratio for the passive layer and the piezoelectric layer is not equal to 1.0 which is usually adopted by previous researchers. Because there exists size dependence of membrane deforma-tion, the optimal value of this thickness ratio needs to be greater than 1.0 on the microscale.