Enabling an Inorganic-Rich Interface via Cationic Surfactant for High-Performance Lithium Metal Batteries

An anion-rich electric double layer(EDL)region is favorable for fabricating an inorganic-rich solid-electrolyte interphase(SEI)towards stable lithium metal anode in ester electrolyte.Herein,cetyltrimethylammonium bromide(CTAB),a cationic surfactant,is adopted to draw more anions into EDL by ionic interactions that shield the repelling force on anions during lithium plating.In situ electrochemical surface-enhanced Raman spectroscopy results combined with molecular dynamics simulations validate the enrichment of NO_(3)^(−)/FSI−anions in the EDL region due to the positively charged CTA^(+).In-depth analysis of SEI structure by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry results confirmed the formation of the inorganic-rich SEI,which helps improve the kinetics of Li^(+)transfer,lower the charge transfer activation energy,and homogenize Li deposition.As a result,the Li||Li symmetric cell in the designed electrolyte displays a prolongated cycling time from 500 to 1300 h compared to that in the blank electrolyte at 0.5 mA cm^(-2) with a capacity of 1 mAh cm^(-2).Moreover,Li||LiFePO_(4) and Li||LiCoO_(2) with a high cathode mass loading of>10 mg cm^(-2) can be stably cycled over 180 cycles.

Cationic ordering transition in oxygen-redox layered oxide cathodes

Understanding the structural origin of the competition between oxygen 2p and transition-metal 3d orbitals in oxygen-redox(OR)layered oxides is eminently desirable for exploring reversible and high-energy-density Li/Na-ion cathodes.Here,we reveal the correlation between cationic ordering transition and OR degradation in ribbon-ordered P3-Na_(0.6)Li_(0.2)Mn_(0.8)O_(2) via in situ structural analysis.Comparing two different voltage windows,the OR capacity can be improved approximately twofold when suppressing the in-plane cationic ordering transition.We find that the intralayer cationic migration is promoted by electrochemical reduction from Mn^(4+)to Jahn–Teller Mn^(3+)and the concomitant NaO_(6) stacking transformation from triangular prisms to octahedra,resulting in the loss of ribbon ordering and electrochemical decay.First-principles calculations reveal that Mn^(4+)/Mn^(3+)charge ordering and alignment of the degenerate eg orbital induce lattice-level collective Jahn–Teller distortion,which favors intralayer Mn-ion migration and thereby accelerates OR degradation.These findings unravel the relationship between in-plane cationic ordering and OR reversibility and highlight the importance of superstructure protection for the rational design of reversible OR-active layered oxide cathodes.

Fabrication and Properties of a New Reactive Diluent for Cationic UV Curing

The reactive diluent prepared by siloxane modified Trimethylene oxide can improve the performance of the UV curing system.Therefore,1,7-bis[(3-ethyl-3-methoxyoxacylobutane)propyl]octadecylosiloxane(BEMOPOMTS)was synthesized from diethyl carbonate,trimethylopropanes,allyl bromide,and 1,1,3,3,5,5,7,7-octadecylosiloxane as the main raw materials.BEMOPOMTS can be used as reactive diluents in the field of cationic UV curing.It has good thermal stability,and the addition of BEMOPOMTS significantly improves the tensile strength and elongation at break of epoxy resin.Compared with the pure epoxy resin,adding 20%BEMOPOMTS increased the elastic modulus by 25%to 677 MPa.

Flotation of low-grade bauxite using organosilicon cationic collector and starch depressant

The flotation of diaspore and three kinds of silicate minerals, including kaolinite, illite and pyrophyllite, using an organosilicon cationic surfactant (TAS101) as collector and starch as depressant was investigated. The results show that both diaspore and aluminosilicate minerals float readily with organosilicon cationic collector TAS101 at pH values of 4 to 10. Starch has a strong depression effect for diaspore in the alkaline pH region but has little influence on the flotation of aluminosilicate minerals. It is possible to separate diaspore from aluminosilicate minerals using the organosilicon cationic collector and starch depressant. Further studies of bauxite ore flotation were also conducted, and the reverse flotation separation process was adopted. The concentrates with the mass ratio of Al2O3 to SiO2 of 9.58 and Al2O3 recovery of 83.34% are obtained from natural bauxite ore with the mass ratio of Al2O3 to SiO2 of 6.1 at pH value of 11 using the organosilicon cationic collector and starch depressant.

Comparative studies on flotation of aluminosilicate minerals with Gemini cationic surfactants BDDA and EDDA

Gemini quaternary ammonium salt surfactants, butane-a, co-bis（dimethyl dodeculammonium bromide） （BDDA） ethane-a, fl-bis（dimethyl dodeculammonium bromide） （EDDA） were adopted to comparatively study the flotation behaviors of kaolinite, pyrophyllite and illite. It was found that three silicate minerals all exhibited good floatability with Gemini cationic surfactants as collectors over a wide pH range, while BDDA showed a stronger collecting power than EDDA. FTIR spectra and zeta potential analysis indicated that the mechanism of adsorption of Gemini collector molecules on three silicate minerals surfaces was almost identical for the electronic attraction and hydrogen bonds effect. The theoretically obtained results of density functional theory （DFT） at B3LYP/6-31G （d） level demonstrated the stronger collecting power of BDDA presented in the floatation test and zeta potential measurement.

Rheological Behavior of Aqueous Solutions of Cationic Guar in Presence of Oppositely Charged Surfactant

The cationic guar （CG） is synthesized and the rheological behavior of aqueous solutions of CG in the presence of sodium dodecyl sulfate （SDS） is studied in detail. The steady viscosity measurements show that the zero shear viscosity enhancement can be almost 3 orders of magnitude as the concentration of SDS increases from 0 to 0.043%. The gel-like formation is observed as the concentration of SDS is greater than 0.016%. The oscillatory rheological measurements of CG solutions in the presence of SDS show that the crossover modulus is almost independent of the concentration of SDS whereas the apparent relaxation time increases swiftly upon increasing the concentration of SDS. The experimental results indicate that the strength rather than the number of the cross-links is greatly affected by SDS molecules. The mechanism concerning the effect of SDS upon the rheology of CG solutions can be coined by the two-stage model. Before the formation of cross-links at the critical concentration, the electrostatic interaction between SDS and cationic site of CG chains plays a key role and the SDS molecules bind to CG chains through the electrostatic interaction. After the formation of cross-links at the concentration greater than the critical concentration, the cooperative hydrophobic interaction become dominant and SDS molecules bind to the cross-links through the hydrophobic interaction. The theological behavior of aqueous solutions of CG in the presence of SDS is chiefly determined by the micelle-like cross-links between CG chains. In fact, the flow activation energy of CG solution, obtained from the temperature dependence of the apparent relaxation time, falls in the range of transferring a hydrophobic tail of SDS from the micelle to an aqueous environment.

Preparation of Cationic Starch by Electromagnetic Dry Process (EMDP)

Introduction Cationic starches are a series of products of which various sorts with different properties and usages can all be produced via cationic reactions by using different types of etherification agents under different conditions. As an additive and strengthening agent,

In vitro investigation of RGD-modified stabilized cationic liposomes as non-viral vehicle for siRNA delivery

In this study, the novel RGD-modified stabilized cationic liposomes were developed as the delivery vehicle for siRNA targeting human MDR1 gene. The complex of cationic liposomes and siRNA, RGD-Lipo-siRNA, was prepared with a narrow size distribution below 200 nm. It was shown that the encapsulated siRNA in the liposomes could be effectively protected from serum degradation. Also, enhanced cell binding and intracellular uptake of siRNA in the doxorubicin-resistant human ova- rian cancer cell lines SKOV3/A were found in RGD-Lipo-siRNA preparation as compared to that of unmodified cationic lipsomes （Lipo-siRNA）. Using the post-insertion method for RGD modification, lysosome release of siRNA in pRGD-Lipo-siRNA was improved. From flow cytometry, significant increase of doxorubicin accumulation was observed in the SKOV3/A cells treated with pRGD-Lipo-siRNA targeting human MDR1 gene. In vitro cytotoxicity assay showed that the significant cell growth inhibition was achieved in the SKOV3/A cells after treating with the combined use of siRNA and doxorubicin. In conclusions, postinserted RGD modified lipoplex, pRGD-Lipo-siRNA, was successfully used for siRNA transfection and achieved drug resistance reversal in human ovarian cancer SKOV3/A （doxorubicin-resistant） cells. It suggested that this liposomes might be a potential vehicle for siRNA delivery in vivo.

Effect of Potassium Oleate on Rheological Behavior of Cationic Guar in Aqueous Solution with Varying Temperatures

The rheology of the cationic guar （CG） solution was measured and the effects of potassium oleate （KOA） upon the rheological properties of CG solution were studied. The steady shear viscosity measurement has shown that the viscosity of CG solution increased dramatically in the presence of KOA. The viscosity enhancement of KOA upon CG solution can be approximate three orders in magnitude. The gel-like formation of CG solution is observed at the high concentration of KOA. The excess addition of KOA results in the phase separation of CG solution. The oscillatory rheological measurement has shown that the crossover modulus Gc （corresponding to either storage modulus G＇ or loss modulus G＇＇ at the frequency wc where G＇ equals G＇＇） for CG solution, decreases with the increasing the concentration of KOA in solution. On the other hand, the apparent relaxation time 7-app （=1/wc） increases with increasing the concentration of KOA in solution. Our experimental results suggest that for surfaetant such as KOA which has a stronger tendency to form micelles in solution, the cooperative hydrophobic interaction of polymer bound to surfactants is less necessary to the formation of aggregates in solution, especially at the high concentration of surfactants. In fact, with the increase of the concentration of KOA, the number of the aggregates which associate polymer together decreases whereas the intensity of these aggregates increases. The effect of temperature upon the aggregation is also significant. With the increase of temperature, the number of the aggregates increases whereas the intensity of these aggregates decreases, probably because the ionization of KOA increases at high temperature.

Degradation Mechanism of Cationic Red X-GRL by Ozonation

The degradation mechanism of Cationic Red X-GRL was investigated when the intermediates, the nitrate ion and the pH were analyzed in the ozonation. The degradation of the Cationic Red X-GRL includes the de-auxochrome stage, the decolour stage, and the decomposition of fragment stage. During the degradation process, among the six nitrogen atoms of Cationic Red X-GRL, one is transferred into a nitrate ion, one becomes the form of an amine compound, and the rest four are transformed into two molecules of nitrogen. In the course of the ozonation of Cationic Red X-GRL, the direct attack of ozone is the main decolour effect.

Studies on a Cationically Modified Quaternary Ammonium Salt of Lignin

A new quaternary ammonium salt monomer was synthesized and a quaternary amination of lignin（ noted as QL）, with the monomer was carried out by grafting copolymerization. The products were characterized by Fourier Transform Infrared spectroscopy（ FTIR）. The experimental results indicate that the yield of the monomer was 99.06%, and the conversion of the monomer and the grafting yield of QL were 93.69% and 185.78%, respectively. The feasibility of QL as the flocculant to be applied in color removal of five artificial dyes, erioehrome black T（dye A）, gongo red（dye B ）, direct fast black G （dye C ）, cuprofix blue green B （dye D ）, and acid black ATT （dye E ） was examined. Results show that OL exhihits the favorable flocculation nerformance and high stability.

Preparation of Cationic Chitosan-Polyacrylamide Flocculant and Its Properties in Wastewater Treatment

Chitosan derived from crab shells, was used to prepare the graft polymer in aqueous solution with acrylamide （AM） and methacrylatoethyl trimethyl ammonium chloride （DMC） as raw materials and ceric ammonium nitrate （CAN） as initiator. The flocculation ability of the resulting polymer （PCAD） was studied in waste water treatment experiments. Its properties were determined on the basis of the transmittance of waste water after flocculation. The effects of ehitosan and DMC content on PCAD＇s flocculation ability were studied. Floeculation experiments were also undertaken under various pH conditions. According to the experimental data, the flocculation ability could be improved when chitosan content decreased in the raw material, but the monomer conversion would decrease obviously. When the ehitosan＇s content was more than 65%, AM and DMC groups were less on each chitosan molecule. So PCAD＇s flocculation ability was poor. Similarly, high content of DMC would result in low monomer conversion and high flocculation ability. PCAD molecules with more DMC group had more positive charges. It was favorable to flocculation. However, monomer conversion would decrease with the increase of DMC content. The suitable conditions were that chitosan and DMC contents were 65% and 15-20%, respectively. The experiment data showed that PCAD had good flocculation ability under weak acidic condition. Its ability would be weakened by strong acidic or alkaline condition. The flocculation efficiency was the best at pH of 5.5 when PCAD＇s dosage was 8mg-Lk Compared with cationic polymer （the copolymer of AM and DMC, PAD）, PCAD showed better flocculation ability under acid and neutral conditions, but worse ability under alkaline condition.

Synthesis and Surface Activity of Novel Triazole-based Cationic Gemini Surfactants

The synthesis and surfactant activities of two new cationic gemini surfactants containing triazole compound as spacer were described. Their critical micelle concentrations (CMC), which are 1.8×10-4 mol/L and 3.9×10-4 mol/L respectively, are much lower than that of conventional surfactant cetyltrimethyl ammonium chloride (CTAC). In addition, compared with some gemini surfactants containing phenylene, xylylene and stilbenyl as spacer, this new kind of surfactants has good solubility in water at room temperature because of containing more hydrophilic groups or atoms in molecules.

Application of Tertiary Amine Cationic Polyacrylamide with High Cationic Degree in Salt-free Dyeing of Reactive Dyes

Tertiary amine cationic polyacrylamide with high cationization degree was used as a new cationic agent to pretreat cotton with dip-pad-bake method. The obtained cationic cotton was dyed with reactive dyes in the ab-sence of electrolyte. The effects of the characteristics of the cationic agent and the pretreatment conditions on dye-ability of reactive dye were investigated. The results showed that the fixation and K/S values of the reactive dyes on the cationic cotton were improved compared with those on the untreated one in the presence of salt. Tests on fast-ness properties of the dyed cotton and fabric quality of the pretreated cotton were carried out and the results showed that wash and rub fastness of the salt-free dyeing were both satisfactory. And anti-crease property,tensile and tear strength,and handling of the cationic cotton were also good compared with that of the untreated one.

Kinetics of the Reaction Between Ozone and Cationic Red X-GRL

The ozonation of Cationic Red X-GRL in a semi-batch reactor was studied with variation of the gas flow rate, initial Cationic Red X-GRL concentration, temperature, and pH value. By the evaluation of the liquid mass transfer coefficient, the interfacial area, and the stoichiometric ratio between ozone and Cationic Red X-GRL, the rate constants and the kinetic regime of the reaction between ozone and Cationic Red X-GRL were investigated by applying the experimental data to a model based on the film mass transfer theory. The results obtained support a second order overall reaction, first order with respect to both ozone and dye, and the rate constants were correlated by a modified Arrhenius Equation of temperature and pH value with activation energy of 18.06kJ·mol-1. Hatta number of the reaction was found to be between 0.026 and 0.041, it indicates that the reaction occurs in the liquid bulk, corresponding to the slow kinetic regime.

Preparation of cationic polyacrylamide microsphere emulsion and its performance for permeability reduction

In this paper, cationic polyacrylamide microspheres （CPAM） were synthesized using acrylamide （AM） and methacryloyloxyethyl trimethyl ammonium chloride （TMAEMC） as monomers, ammonium sulfate as dispersant, poly（acryloyloxyethyl trimethyl ammonium chloride） （PAETAC） as dispersion stabilizer, and ammonium persulfate as initiator. The synthetic method was dispersion polymerization. The effects of monomer ratio （AM/TMAEMC）, dispersant concentration, and dispersion stabilizer dosage on dispersion polymerization were systematically studied to determine the optimal preparation conditions. The structure and viscosity of the synthesized polymer were characterized by FTIR and capillary viscometry, respectively, and the particle sizes and distribution of the polymer microspheres were characterized by microscopy and dynamic light scattering, respectively. Finally, flow tests were conducted to measure the permeability reduction performance of the microspheres at various concentrations in sand packs with different permeability. Results show that CPAM emulsion of a solids content of 1 wt% has excellent performance in low-to-medium permeability formations （〈 1,000 mD）, and the efficiency may reach above 90%.

Adsorption of Metsulfuron and Bensulfuron on a Cationic Surfactant-Modified Paddy Soil

Adsorption isotherms of metsulfuron and bensulfuron on a hexadecyltrimethylammonium （HDTMA） bromide-modified paddy soil under different ionic strengths, with divalent cation Cu^2＋, or having different pH were studied to describe their adsorptive behavior, and to try to explain the adsorption process of a sulfonylurea compound with a carbamoylsulfamoyl group in the modified soil environment. All the adsorption isotherms fitted the Freundlich equation well, and the HDTMA treatment of paddy soil dramatically enhanced adsorption capacity of metsulfuron or bensulfuron. Also, an increase of ionic strength and the addition of divalent heavy metal cation Cu^2＋ on the HDTMA-modified paddy soil increased the adsorption of metsulfuron or bensulfuron. Additionally, for metsulfuron and bensulfuron in the aqueous phase, adsorption capacity of the HDTMA-modified paddy soft gradually increased with decreasing pH.

Application of cationic liposomes for delivery of nucleic acids

Nucleic acid-based bioactive substances have recently emerged as a new class of nextgeneration therapeutics, but their development has been limited by their relatively weakdelivery into target cells. Cationic liposomes have been studied as a means to enhance thestability of nucleic acid therapeutics in the bloodstream and improve their cellular delivery.As nucleic acid therapeutics, siRNA and plasmid DNA have been extensively tested fordelivery using cationic liposomes. This review discusses recent progress in the applicationof cationic liposomes for the delivery of nucleic acid therapeutics.

Cationic Ring Opening Polymerization of Octamethylcyclotetrasiloxane Initiated by Acid Treated Bentonite

Cationic ring opening polymerization of octamethylcyclotetrasiloxane （Da） initiated by acid treated bentonite was investigated. The experimental conditions were chosen on the basis of preliminary experiments.Higher temperature was found beneficial for the reaction process while stirring intensity beyond a certain level showed no obvious effect on the reaction rate. Polymers were characterized by Fourier transform infrared, proton nuclear magnetic resonance （IH-NMR） and gel perneation chromotography. The width of molecular mass distribution was found ranging between 1.2 and 1.4, which is extraordinarlly narrow compared with that of cationic polymerizations reported elsewhere （〉 1.9）. The results were believed due to the absence of free proton and counter ion which simplifies the polymerization process and the huge steric hindrance provided by bentonite particles which keeps the propagation of polysiloxane onto the surface of bentonite particles in a much more regular way. A feasible mechanism is proposed and seems to be supported well by experiments. Additionally, from the results of α, ω-dihydrogen terminated polysiloxanes prepared, the possibility of applying this potential environmentally friendly heterogeneous catalyst in industrial polymerization of cyclosiloxanes is anticipated.

CATIONIC POLYMERIZATION OF ISOBUTYLENE COINITIATED BY AICI_3 IN THE PRESENCE OF ETHYL BENZOATE

The cationic polymerizations of isobutylene （IB） coinitiated by AlCl3 were carried out in solvent mixture of nhexane/methylene dichloride （n-hex/CH2Cl2） of 60/40 V/V in the presence of ethyl benzoate （EB） at various temperatures range from -80℃ to -30℃. The effects of EB concentration （[EB]） and polymerization temperature on monomer conversion, weight-average molecular weight （Mw） and molecular weight distribution （MWD, Mw/Mn） of polyisobutylene （PIB） products were investigated. The rate of polymerization decreased while Mw of PIB products increased with increasing [EB]. The polymers with high molecular weight could be prepared in the presence of a suitable amount of EB. Significantly, the polymers with high Mw of 80.2 × 10^4 and 65.4 × 10^4 could be produced at -80℃ and -70℃ at [EB] = 0.24 × 10^3 mol/L respectively, which were much higher than that （Mw = 57.9 × 10^4） of PIB prepared at -100℃ in the absence ofEB. A simple but effective method for preparing the high molecular weight polyisobutylenes was developed in this work. It has been also found that the activation energy for propagation （Ep） depended on the polymerization temperature range in the presence of EB. An obvious inflection of the linear plots of lnXn versus 1/Tp occurred at the temperature range from -60℃ to -50℃ at four different concentrations of EB from 0.19 × 10^3 mol/L to 0.33× 10^3 tool/L, and thus the inflection temperature （Tinf） was in the range of -60℃ to -50℃. When [EB] was in the range of 0.24 × 10^3 mol/L to 0.33× 10^3 mol/L, Ep was determined to be around -12 kJ/mol when the polymerization was carried out at temperatures from -80℃ to Tinf and to be around -28 kJ/mol at temperatures from Tinf to -15℃ respectively.