DESIGN OBJECT MODEL AND DESIGN PROCESS MODEL OF COMPUTER AIDED AIRCRAFT CONCEPTUAL DESIGN SYSTEM

ＤＥＳＩＧＮＯＢＪＥＣＴＭＯＤＥＬＡＮＤＤＥＳＩＧＮＰＲＯＣＥＳＳＭＯＤＥＬＯＦＣＯＭＰＵＴＥＲＡＩＤＥＤＡＩＲＣＲＡＦＴＣＯＮＣＥＰＴＵＡＬＤＥＳＩＧＮＳＹＳＴＥＭＳｈｅｎＺｈａｎｇ（ＡｉｒｃｒａｆｔＣＡＤＲｅｓｅａｒｃｈＣｅｎｔｅｒ，Ｂｅｉｊｉｎ...

Case-based intelligent computer aided design system of welding machinery

The procedure during complex system plan design of welding position-locating machine is studied in this paper. The main difficulties in designing welding position-locating machine utilizing computer are discussed as well. A method of case-based intelligent CAD system for welding position-locating machine ( WMICAD) is put forward through wide research on design methodology. Object-oriented programming method is also applied to Ms system. The basic idea and realizing method are described.

THE APPLICATION OF THE COMPUTER AIDED ANALYSIS IN THE DESIGN OF COALMINE MACHINERY LINKAGES

This paper gives and verifies a mathematical model with only one argument which determines the movement parameters of any point in a plane four-bar linkage on the basis of the analysis of mining machinery linkages. C A A (computer aided analysis) based on the mathemetical model can be used to make not only the quick and accurate analysis and design of mining machinery linkages but also the movement analysis and optimization design of any other plane four-bar linkage.

Computer Aided Design and Performance Analysis of Inverse Fluidized Bed Biofilm Reactors with Special Reference to Bioplastic Synthesis

Poly Laevo Lactic Acid (PLLA), in spite of being an excellent bioplastic, has exorbitantly high market price due to the high cost of raw material (lactose, glucose, sucrose). Hence, its manufacture is being attempted starting from waste effluents such as cheese whey and molasses. Earlier studies on the same in fluidized bed and semifluidized bed biofilm reactors yielded encouraging results. The present study therefore involves design and analysis of inverse fluidized bed biofilm reactors for lactic acid synthesis. The performance features of the bioreactor have been studied both mathematically as well as experimentally. The inverse fluidized bed biofilm reactor has been found to provide more than 75% conversion of sucrose/lactose even at high capacities (high feed flow rates) exceeding 56,000 L/hr, within a reasonably low reactor volume. The fractional substrate conversion increases, though sluggishly, with increase in feed flow rate due to bed expansion and also with increase in cell mass concentration in biofilm due to enhancement in intrinsic rate of bioconversion. The inverse fluidized bed biofilm reactor of proposed design could be safely recommended for the commercial synthesis of polymer grade lactic acid from waste effluents such as cheese whey and molasses. The low operating cost of the bioreactor (due to downflow mode of operation) enhances the economy of the process. This would also help in significantly lowering the market price of the green plastic (PLLA) and shall promote its large scale manufacture and utilisation.

COMPUTER AIDED DESIGN OF AIRCRAFT CABIN LAYOUT

The reasonability of cabin layout is studied according to the ergonomic theory on micro-computer. This system includes the anthropometric model,modeling of aircraft seats and cabin,interactive ergonomic analyses on effect.

The Implementation Methods for Computer Aided Design and Analysis on Color-Woven Fabrics

Methods for computer aided design and analysis on color-woven fabrics are presented. The relation of color pattern, colored warp, colored weft and the model for regular weave texture are given based on their formative principle. Some efficient algorithms are developed to determine the color order of warp and weft threads which yields a given color pattern and regular weave texture. Finally, the design system structure and data process flowing are introduced.

Application and development of case-based reasoning in fixture design

Based on the case-based designing (CBD), it is presented that the similarity of the fixtures is described by the fixture information of workpiece and the structure information of feature. Then, the computer-aided fixture design system is created on case-based reasoning (CBR), in which the attributes information of the main features of workpiece and structure of fixture as case index code are designed for the retrieve of the similar cases, and the structure and hierarchical relation of case library are set up for store. Meanwhile, the algorithm based on the knowledge-guided in the retrieve of the similar cases, the strategy of case adaptation and case storage in which the case identification number is used to distinguish from similar cases are presented. The application of the system in some projects improves the design efficiency and gets a good result.

AN APPROACH TO FEATURE-BASED PARAMETRIC DESIGN FOR DIE AND MOULD

An approach to feature-based parametric design for die and mould is proposed in this paper.The assembly relationship and parts of the die and mould are described by feature.The dependent relationship of features is described by parent-child operator structure.The feature shape and location can be modified by design parameters.An expert system is used for deriving a geometry of the features which satisfies the given constraints.This approach provides a more natural and convenient method of representing a parametric model of the die and mould.

Implementation of a Sketch Based Approach to Conceptual Aircraft Design Synthesis and Modeling

In the context of applying computer aided design tools to aircraft conceptualdesign, a sketch based approach is proposed to help designers turn their original concepts intocomplex numerical models that are usable for further analysis and optimization. This approachemphasizes the integration of general configuration and the layout of such components as engines,payloads, fuel tanks and landing gears, and the representation of a design scheme as uniform planesketches and three dimensional models. This paper presents the measures adopted to implement theapproach in a prototype system, including the object-oriented data structure, friendly graphicaluser interfaces and basic features of relevant modules. Several examples generated in the prototypeand applications of the results are finally outlined to illustrate the effectiveness of theapproach.

Environment of Design Requirements Input and Preliminary Sizing for Aircraft Conceptual Design

To supply a convenient and expandable tool to organize the designrequirements of a new aircraft and estimate its basic design parameters during conceptual design,the Environment of Design Requirements Input and Preliminary Sizing (EDRIPS) was developed. In thisenvironment, the performance requirements, mission profile and payloads could be inputted orselected respectively through user-friendly interfaces in a highly interactive way. Based on theserequirements, it enables the designer to pick up a design point in the solution space throughconstraint analysis, and then conduct mission analysis either step by step or via auto iteration byusing an improved method for estimating the takeoff weight. The implementation of each module andthe methods utilized are described. A design example is finally presented and analyzed to validatethe efficiency and reliability of applying EDRIPS to aircraft conceptual design.

The Creative Design Research of Product Appearance Based on Human-machine Interaction and Interface

Today’s product creative design has rendered many fe atures and has brought a great change in our everyday life, there are many new c hallenges in its traditional theory and principle. According to the traditional design theory, the FBS design model pays more attention to the function and stru cture of the product. But this model still couldn’t strengthen the relation bet ween product appearance design and human-machine design effectively. This paper adopt converse design thinking and presents an improved design thinking methodo logy based on C: FBS for product appearance design and give a general summarizat ion for the features, methods and technology based on human-machine interaction and interface. Meanwhile it also combines with the behavior design of product r elated IT fields and constructs a new outline to improve the design of product a ppearance supported by the technology of computer aided design. So the new metho d about design thinking for computer aided design, the new abstract product design model and the key problem of design thinking based on human-machine inte raction and interface are addressed in this paper. This kind of creative design theory that is driven by human-machine interaction and interface will help the development of CAD software system and the research of product design and manufa cture. Additionally, this paper gives some beneficial characters to address the theory based on human-machine interaction and interface. Meanwhile, combining with the developing of computer technology, the trends of design thinking based on t he technology of human-machine interaction and interface are also analyzed and discussed at the end of this paper.

VIRTUAL FUEL-PUMP DESIGN

Some concepts of virtual product are discussed. The key technologies ofvirtual fuel-pump development are in detail analysed, which include virtual fuel-pump productmodeling, intelligent simulation, distributed design environment, and virtual assembly. The virtualfuel-pump development prototype system considers requirement analysis, concept design, injectionpreferment analysis, detailed design, and assembly analysis.

Analysis of solution findings in the conceptual design of function structures

In the conceptual stage the function design process is realized by the computer aided application. After surveying on the function specification methods and the function modeling, a computer aided function design environment is analyzed. Subsequently based on a module library and principle catalogue, a solution finding process as a part of conceptual design is proposed for a creative design. In addition, a search algorithm to find the solution of adaptable function structure is also discussed. The concepts proposed in this paper can support the subsequent design stages, especially simulation for checking the function structure defects.

Object-Oriented Design for FDTD Visual Scientific Computing

A scheme for general purposed FDTD visual scientific computing software is introduced in this paper using object-oriented design (OOD) method. By abstracting the parameters of FDTD grids to an individual class and separating from the iteration procedure, the visual software can be adapted to more comprehensive computing problems. Real-time gray degree graphic and wave curve of the results can be achieved using DirectX technique. The special difference equation and data structure in dispersive medium are considered, and the peculiarity of parameters in perfectly matched layer are also discussed.

OPTIMIZATION DESIGN OF HELICOPTER FOR PRELIMINARY PARAMETERS

A new design method for prehminary parameters is proposed. The analyticmodels of the optimization design are established according to the requirements of helicopter flight performance- stability, engine and weight. The optinial preliminary projectof design to meet the requirements of critenon for helicopter design is worked out byapplying the computer and optimization techniques. The inethod can be used for theanalysis of helicopters for prehminary parameters that are used in practice and for theanalysis of sensibility for preliminary parameters, too. The method is shown to be veryuseful by the example and application in the new design of helicopters.

Study of Piezoresistive Micro Electro-Mechanical Accelerometer Design Platform

According to the inland micro electro-mechanical system （MEMS） process technique level, a design platform of piezoresistive micro electro-mechanical accelerometer is given. This platform is much more adaptable to the inland designer compared with the current MEMS CAD software. The design flow is presented in detail, and the key techique in the platform is analyzed amply. The structure design methodology is exemplified in the design of a piezoresistive accelerometer, and the accelerometer is the optimized structure for the given performance requirements. The accelerometer is now being manufactured.

Designing the Instrument Crank-Coupler Mechanism of Linear Output with Least Transmission Ratio Error

Movement accuracy is the key factor to be considered in designing precision instrument linkage and mini-linkage mechanisms. Although manufacturing errors, elastic deformation, kinematic pair clearance and friction factors all will have synthesis effect on the position accuracy of the mechanical system, the essential factor to guarantee the movement precision remains the kinematic dimensions. Combining the classical theory of mechanical synthesis with the modern error theory and the numerical method, the authors put forward a systematic and complete process and method of computer aided design for the instrument crank-coupler mechanism in which the follower takes the linear displacement approximately within a certain limited domain, with the design result of least transmission ratio error.

Network Garment Style Design System with Remote Information Access and Auto-Connecting Technology

A Network Garment Style Design System (NGSDS) is proposed to enable the remote style structure drawing design of garment. After the development of the system structure based on network that consists of client end and server end at two remote places, a multi-layer part database based on Oracle platform is presented to store information of different parts of garment style. With the acquirement of remote design data at server end using Http technology, the style design is ultimately implemented at the client end using Auto-connecting algorithms. One empirical example is given to show the implementation of the NGSDS.

An Interactive Evolutionary Environment for Creative Design

A creative and/or innovative computer aided design environment is developed around the concept of an evolutionary optimization algorithm. Designs are generated within a set of prescribed design frameworks using a problem specific encoding and modified through operations including recombination, crossover and mutation. Evaluation of all candidate designs is performed by a user through a graphical user interface. A set of problems involving the creation of graphic images is presented. The examples include the generation of a set of two dimensional polygonal shapes, fractal images, path generation from a multi-degree freedom mechanical planar linkage and a mathematically prescribed pattern generation from a graphic design application utilized in quilting. Post design evaluation of the user input to the process provides insight into the individuals design strategy as well as determination of common user attributes in the creative design process.