ENERGY CONSERVATION FOR THE WEAK SOLUTIONS TO THE 3D COMPRESSIBLE NEMATIC LIQUID CRYSTAL FLOW

In this paper,we establish some regularity conditions on the density and velocity fields to guarantee the energy conservation of the weak solutions for the three-dimensional compressible nematic liquid crystal flow in the periodic domain.

Exploration and Application Practice of Energy Conservation Theory and Method in Steel Manufacturing Process System

This article briefly discusses the theoretical basis and overall goals of energy conservation in the steel manufacturing process system.It is proposed that in the process of implementing system energy conservation,it is necessary to fully recognize and utilize the characteristics and functional advantages of the steel manufacturing process,pay more attention to energy quality,firmly grasp the overall goal of system optimization,focus on the integrated optimization of gas,steam,and waste heat systems,and propose the idea of constructing a"steel chemi-cal gas electricity heating cooling multi generation system".Based on practice,the main principles,models,and effects of implementing systematic energy conservation in steel enterprises have been proposed.

THE ENERGY CONSERVATION OF VLASOV-POISSON SYSTEMS

We prove that energy conservation holds for weak solutions to classical VlasovPoisson systems with proper regularity.In particular,there exists a solution that conserves energy with|v|^(m)f0∈L^(1)_(x,v)for m>9/4.

THE ENERGY CONSERVATION OF THE LANDAU-LIFSHITZ-BLOCH EQUATION

In this paper,we consider the three-dimensional Landau-Lifshitz-Bloch equation in the whole space,which can describe the micromagnetic dynamic behavior of material at all temperatures,especially near the Curie temperature.We establish a sufficient condition of energy conservation for when weak solutions of the Landau-Lifshitz-Bloch equation with the temperature higher than the Curie temperature and its gradient belong to the Besov space L_(loc)^(3);B_(p,c0)^(α)(R^(3)))for some α∈(1/2,1)and p=9/(3α+1).Moreover,we also use the dimensional homogeneity to explain that the restrictions on the indicators are reasonable.

An IoT-Based Energy Conservation Smart Classroom System

With the increase of energy consumption worldwide in several domains such as industry,education,and transportation,several technologies played an influential role in energy conservation such as the Internet of Things(IoT).In this article,we describe the design and implementation of an IoT-based energy conser-vation smart classroom system that contributes to energy conservation in the edu-cation domain.The proposed system not only allows the user to access and control IoT devices(e.g.,lights,projectors,and air conditions)in real-time,it also has the capability to aggregate the estimated energy consumption of an IoT device,the smart classroom,and the building based on the energy consumption and cost model that we propose.Moreover,the proposed model aggregates the estimated energy cost according to the Saudi Electricity Company(SEC)rates.Furthermore,the model aggregates in real-time the estimated energy conservation percentage and estimated money-saving percentage compared to data collected when the system wasn't used.The feasibility and benefits of our system have been validated on a real-world scenario which is a classroom in the college of computer science and engineering,Taibah University,Yanbu branch.The results of the experimental studies are promising in energy conservation and cost-saving when using our proposed system.

Optimizing Storage for Energy Conservation in Tracking Wireless Sensor Network Objects

The amount of needed control messages in wireless sensor networks(WSN)is affected by the storage strategy of detected events.Because broadcasting superfluous control messages consumes excess energy,the network lifespan can be extended if the quantity of control messages is decreased.In this study,an optimized storage technique having low control overhead for tracking the objects in WSN is introduced.The basic concept is to retain observed events in internal memory and preserve the relationship between sensed information and sensor nodes using a novel inexpensive data structure entitled Ordered Binary Linked List(OBLL).Whenever an object passes over the sensor area,the recognizing sensor can immediately produce an OBLL along the object’s route.To retrieve the entire information,the OBLL can be traversed with logarithmic complexity which is much less than the traversing complexity of existing linked list structures.Performance evaluation and simulations were carried out to ensure that the suggested technique minimizes the number of messages and thus saving energy and extending the network life.

Application Research and Case Analysis of Green Technology in Building Engineering under the Direction of Energy Conservation Demands

With the rapid development of the economy,the scale of construction projects in China is gradually expanding.In terms of construction technology,continuous innovation is being made to meet the needs of sustainable development strategies,and green energy conservation technologies have emerged.It has a brand new design concept,and advocates for maximum energy conservation and environmental protection,fundamentally promoting the rational use of resources and space,and preventing the expansion of air and land pollution.First of all,a brief explanation is given on the current development status of green energy conservation technology in this paper.Secondly,through the introduction and analysis of energy conservation technologies and related building cases,the in-depth research on energy conservation measures of buildings is conducted.Finally,the prospects of green energy conservation technologies are proposed based on the current development status in China.This paper has certain reference value for its related engineering and theoretical research.

Assessment of the Implementation of Energy Conservation Opportunities Arising from Energy Audits;A Study of Four-Star and Five-Star Hotels in Nairobi Kenya

This study assesses the implementation of energy conservation opportunities in four-star and five-star hotels in Nairobi. The Covid-19 pandemic had a significant impact on the Hospitality Industry. Currently, there is a growing inclination to furnish guests with superior and sustainable services in an energy-efficient and eco-friendly way. Comprehensive research was conducted from energy audits gathered from the establishments and contracted auditing companies, on top of this, hotel staff were given digital questionnaires. To add to the data, the researcher surveyed the hotels with engineering managers. The Energy Audits found that all 10 hotels had adopted Energy Conservation Opportunities (ECOs). After further analysis, the mean adoption rate of Energy Conservation Opportunities (ECOs) during the past three years was 55.83%, which was below the aim of 100%. According to studies, hotel staff manages energy to cut costs. The researcher found that hotels use up a lot of energy. However, they have conservation potential, depending on government policies, costs, ease of implementation, and management commitment to sustainable practices. Essentially, Energy Conservation Opportunities (ECOs) reduce energy expenditures and boost reliable revenues, especially during high energy prices and uncertainty.

Distributed Power Control for Energy Conservation in Hybrid Cellular Network with Device-to-Device Communication

Device-to-Device(D2D) communication has been proposed as a promising implementation of green communication to benefit the existed cellular network.In order to limit cross-tier interference while explore the gain of short-range communication,we devise a series of distributed power control(DPC) schemes for energy conservation(EC)and enhancement of radio resource utilization in the hybrid system.Firstly,a constrained opportunistic power control model is built up to take advantage of the interference avoidance methodology in the presence of service requirement and power constraint.Then,biasing scheme and admission control are added to evade ineffective power consumption and maintain the feasibility of the system.Upon feasibility,a non-cooperative game is further formulated to exploit the profit in EC with minor influence on spectral efficiency(SE).The convergence of the DPC schemes is validated and their performance is confirmed via simulation results.

On the energy conservation and critical velocities for the propagation of a "steady-shock" wave in a bar made of cellular material

The propagation of shock waves in a cellular bar is systematically studied in the framework of continuum solids by adopting two idealized material models, viz. the dynamic rigid, perfectly plastic, locking （D-R-PP-L） model and the dynamic rigid, linear hardening plastic, locking （D-R-LHP-L） model, both considering the effects of strain-rate on the material properties. The shock wave speed relevant to these two models is derived. Consider the case of a bar made of one of such material with initial length L 0 and initial velocity v i impinging onto a rigid target. The variations of the stress, strain, particle velocity, specific internal energy across the shock wave and the cease distance of shock wave are all determined analytically. In particular the ＂energy conservation condition＂ and the ＂kinematic existence condition＂ as proposed by Tan et al. （2005） is re-examined, showing that the ＂energy conservation condition＂ and the consequent ＂critical velocity＂, i.e. the shock can only be generated and sustained in R-PP-L bars when the impact velocity is above this critical velocity, is incorrect. Instead, with elastic deformation, strain-hardening and strain-rate sensitivity of the cellular materials being considered, it is appropriate to redefine a first and a second critical impact velocity for the existence and propagation of shock waves in cellular solids. Starting from the basic relations for shock wave propagating in D-R-LHP-L cellular materials, a new method for inversely determining the dynamic stress-strain curve for cellular materials is proposed. By using e.g. a combination of Taylor bar and Hopkinson pressure bar impact experimental technique, the dynamic stress-strain curve of aluminum foam could bedetermined. Finally, it is demonstrated that this new formulation of shock theory in this one-dimensional stress state can be generalized to shocks in a one-dimensional strain state, i.e. for the case of plate impact on cellular materials, by simply making proper replacements of the elastic and plastic constants.

Run-to-run Optimization for Fed-batch Fermentation Process with Swarm Energy Conservation Particle Swarm Optimization Algorithm

An iterative optimization strategy for fed-batch fermentation process is presented by combining a run-to-run optimization with swarm energy conservation particle swarm optimization (SEC-PSO). SEC-PSO, which is designed with the concept of energy conservation, can solve the problem of premature convergence frequently appeared in standard PSO algorithm by partitioning its population into several sub-swarms according to the energy of the swarm and is used in the optimization strategy for parameter identification and operation condition optimization. The run-to-run optimization exploits the repetitive nature of fed-batch processes in order to deal with the optimal problems of fed-batch fermentation process with inaccurate process model and unsteady process state. The kinetic model parameters, used in the operation condition optimization of the next run, are adjusted by calculating time-series data obtained from real fed-batch process in the run-to-run optimization. The simulation results show that the strategy can adjust its kinetic model dynamically and overcome the instability of fed-batch process effectively. Run-to-run strategy with SEC-PSO provides an effective method for optimization of fed-batch fermentation process.

A Moored Underwater Energy Conservation System for Profiling Measurement

There is a need to obtain the hydrologic data including ocean current, wave, temperature and so on in the South China Sea. A new profiling instrument which does not suffer from the damage due to nature forces or incidents caused by passing ships, is under development to acquire data from this area. This device is based on a taut single point mid-water mooring system. It incorporates a small, instrumented vertically profiling float attached via an electromechanical cable to a winch integral with the main subsurface flotation. On a pre-set schedule, the instrument float with sensors is winched up to the surface if there is no ship passing by, which is defined by an on-board miniature sonar. And it can be. inunediately winched down to a certain depth if the sonar sensor finds something is coming. Since, because of logistics, the area can only be visited once for a long time and a minimum of 10 times per day profiles are desired, energy demands are severe. To respond to these concerns, the system has been designed to conserve a substantial portion of the potential energy lost during the ascent phase of each profile and subsequently use this energy to pull the instrument down. Compared with the previous single-point layered measuring mode, it is advanced and economical. At last the paper introduces the test in the South China Sea.

Generalised energy conservation law for chaotic phenomena

Chaotic phenomena are increasingly being observed in all fields of nature,where investigations reveal that a natural phe nomenon exhibits nonlinearities and attempts to reveal their deep underlying mechanisms.Chaos is normally understood as“a state of disorder”,for which there is as yet no universally accepted mathematical definition.A commonly used concept states that,for a dynamical system to be classified as chaotic,it must have the following properties:be sensitive to initial conditions,show topological transitivity,have densely periodical orbits etc.Revealing the rules that govern chaotic motion is thus an important unsolved task for exploring nature.W e present herein a generalised energy conservation law governing chaotic phenomena.Based on two scalar variables,viz.generalised potential and kinetic energies defined in the phase space describing nonlinear dynamical systems,we find that chaotic motion is periodic motion with infinite time period whose time-averaged generalised potential and kinetic energies are conserved over its time period.This implies that,as the averaging time is increased,the time-averaged generalised potential and kinetic energies tend to constants while the time-averaged energy flows,i.e.,their rates of change with time,tend to zero.Numerical simulations on reported chaotic motions,such as the forced van der Pol system,forced Duffing system,forced smooth and discontinuous oscillator,Lorenz’s system,and Rossler's system,show the above conclusions to be correct according to the results presented herein.This discovery may indicate that chaotic phenomena in nature could be controlled because,even though their instantaneous states are disordered,their long-time averages can be predicted.

Energy conservation and emissions reduction strategies in foundry industry

Current energy conservation and emissions reduction strategies in iron and steel industry were reviewed. Since foundry industry is one of the major source of energy consumption and pollution emission (especially CO 2 ), issues concerning energy-saving and emission-reduction have been raised by governments and the industry. Specialists from around the world carried out multidimensional analyses and evaluation on the potentials in energy conservation and emissions reduction in iron and steel industry, and proposed various kinds of analyzing models. The primary measures mainly focus on the targeted policies formulation and also on clean and highefficient technologies development. The differences and similarities in energy conservation and emission reduction in foundry industry between China and other countries were discussed, while, the future development trend was also pointed out.

Water and Energy Conservation of Rainwater Harvesting System in the Loess Plateau of China

Water is the source of all the creatures on the earth and energy is the main factor driving the world. With the increasing population and global change, water and energy conservation have become worldwide focal issues, particularly in the water-stressed and energy-limited regions. Rainwater harvesting, based on the collection and storage of rainfall runoff, has been widely used for domestic use and agricultural production in arid and semiarid regions. It has advantages of simple operation, high adaption, low cost and less energy consumption. This study reviewed rainwater harvesting systems adopted in the Loess Plateau of China and analyzed water use efficiency （WUE） for various rainwater harvesting techniques. Supplemental irrigation using harvested rainwater could increase crop yield by more than 30%, and WUE ranged from 0.7 to 5.7 kg m4 for spring wheat, corn and flax, and 30-40 kg m-3 for vegetables. Moreover, energy consumption for rainwater harvesting based on single family was compared with traditional water supply in the city of the Loess Plateau using the life cycle assessment （LCA） method. Results showed that energy consumption yielded per unit harvested rainwater was 25.96 MJ m-3 yr which was much less than 62.25 MJ m3 yr^-1 for main water supply in Baoji City, Shanxi Province, meaning that rainwater harvesting saved energy by 139.8% as compared to the main water supply system. This study highlights the importance and potential of rainwater harvesting for water and energy conservation in the near future.

How do energy policies affect industrial green development in China:Renewable energy,energy conservation,or industrial upgrading?

The industrial sector has accounted for approximately 70%of China's total energy consumption over the past 30 years.Achieving green development is thus an important strategic goal of the Chinese industrial sector.The Chinese government has adopted various energy policies to facilitate industrial green development.Due to their different goals,these policies may have different impacts on the promotion of green development in the industrial sector.Using panel data on 31 provinces from 2007 to 2014,we examine the effects of three types of energy policies—renewable energy,energy conservation,and industrial upgrading—on industrial green development in China,measured using reduced energy intensity.Our empirical findings suggest that all three types facilitate industrial green development.However,effectiveness varies by policy type and region.Renewable energy and energy conservation policies have stronger impacts than policies aiming at upgrading traditional fossil fuel industries.Moreover,it takes longer for the effectiveness of industrial upgrading policies to be manifested,compared with the other two types.We discuss the implications of these empirical findings for future policymaking in promoting industrial green development.

On the energy conservation electrostatic particle-in-cell/Monte Carlo simulation: Benchmark and application to the radio frequency discharges

We benchmark and analyze the error of energy conservation （EC） scheme in particle-in-cell/Monte Carlo （PIC/MC） algorithms by simulating the radio frequency discharge. The plasma heating behaviors and electron distributing functions obtained by one-dimensional （1D） simulation are analyzed. Both explicit and implicit algorithms are checked. The results showed that the EC scheme can eliminated the self-heating with wide grid spacing in both cases with a small reduction of the accuracies. In typical parameters, the EC implicit scheme has higher precision than EC explicit scheme. Some ＂numerical cooling＂ behaviors are observed and analyzed. Some other errors are also analyzed. The analysis showed that the EC implicit scheme can be used to qualitative estimation of some discharge problems with much less computational resource cost without much loss of accuracies.

Total Energy Conservation and the Symplectic Algorithm

Based on the principle of total energy conservation, we give two important algorithms, the total energy conservation algorithm and the symplectic algorithm, which are established for the spherical shallow water equations. Also, the relation between the two algorithms is analyzed and numerical tests show the efficiency of the algorithms.

Sewerage Force Adjustment Technology for Energy Conservation in Vacuum Sanitation Systems

The vacuum sanitation is the safe and sound disposal approach of human excreta under the specific environments like flights, high speed trains and submarines. However, the propulsive force of current systems is not adjustable and the energy consumption does not adapt to the real time sewerage requirement. Therefore, it is important to study the sewerage force adjustment to improve the energy efficiency. This paper proposes an energy conservation design in vacuum sanitation systems with pneumatic ejector circuits. The sewerage force is controlled by changing the systematic vacuum degree according to the amount of the excreta. In particular, the amount of the excreta is tested by liquid level sensor and mass sensor. According to the amount of the excreta, the relationship between the excreta amount and the sewerage force is studied to provide proper propulsive force. In the other aspect, to provide variable vacuum degrees for different sanitation requirements, the suction and discharge system is designed with pneumatic vacuum ejector. On the basis of the static flow-rate characteristics and the vacuum generation model, the pressure response in the ejector circuit is studied by using the static flow rate characteristics of the ejector and air status equation. The relationship is obtained between supplied compressed air and systematic vacuum degree. When the compressed air is supplied to the ejector continuously, the systematic vacuum degree increases until the vacuum degree reaches the extreme value. Therefore, the variable systematic vacuum degree is obtained by controlling the compressed air supply of the ejector. To verify the effect of energy conservation, experiments are carried out in the artificial excreta collection, and the variable vacuum-degree design saves more than 30% of the energy supply. The energy conservation is realized effectively in the new vacuum sanitation systems with good application prospect. The proposed technology provides technological support for the energy conservation of vacuum sanitation systems.

Are energy conservation and emission reduction policy measures effective for industrial structure restructuring and upgrading?

The use of energy conservation emission reduction policies to promote industrial restructuring and upgrading and thus facilitate energy conservation and emission reduction is one of the 10 important strategies of environmental management in China. The use of energy conservation emission reduction policies to promote industrial restructuring and upgrading and thus facilitate energy conservation and emission reduction is one of the important strategies of environmental management in China. Based on the systematic collection of 1,195 energy conservation emission reduction policies, we discuss the influence of individual measure and measure synergy of energy conservation and emission reduction policies respectively. The results show that the energy conservation and emission reduction policies have a significant effect on the overall promotion of industrial upgrading. The financial measures and guidance measures have a positive impact;the financial measures and guidance measures have significantly positive effect; however, the administrative measures, fiscal tax measures, and other economic measures do the opposite; the positive effect of the synergy of guidance measures and financial measures is greater than the negative effect of considering only the synergy of fiscal tax measures and other economic measures, and significantly greater than the negative effect of the synergy of administrative measures, fiscal tax measures, and other economic measures. We should strengthen and emphasize the use of the measure that has positive effect on industrial structure restructuring and upgrading individually and synergistically.