Error Control Strategies for Numerical Integrations in Fast Collocation Methods

We propose two error control techniques for numerical integrations in fast multiscale collocation methods for solving Fredholm integral equations of the second kind with weakly singular kernels. Both techniques utilize quadratures for singular integrals using graded points. One has a polynomial order of accuracy if the integrand has a polynomial order of smoothness except at the singular point and the other has exponential order of accuracy if the integrand has an infinite order of smoothness except at the singular point. We estimate the order of convergence and computational complexity of the corresponding approximate solutions of the equation. We prove that the second technique preserves the order of convergence and computational complexity of the original collocation method. Numerical experiments are presented to illustrate the theoretical estimates.

A New Class of Nonlinear Error Control Codes Based on Neural Networks

By mcans of stable attractors of discret Hopfield neural network (DHNN) , anew class of nonlinear error control codes is sugsested and some relativetheorems are presented. A kind of single error control codes is also given forillustrating this new approach.

Error Control Strategy in Ultrasonic Body Area Networks

Recently,ultrasonic waves had been introduced as the transmission medium in Body Area Networks(BANs) to reduce the incalculable damage caused by radio waves. However,the communications based on ultrasonic waves suffer from poor propagation of signals in air and consume too much energy. To address these limitations,firstly,we make the theoretical analysis to ensure ultrasonic waves could be used in BANs(UBANs). Then,we propose an error control strategy in UBANs to dynamically adjust the error control scheme and the Max-Retries based on the current channel state,which is called UECS. The UECS is based on IEEE 802.15.6 standards and considering the characteristics of ultrasonic waves in BANs. Simulation results show that UECS achieves better performance in terms of packet delivery ratio and energy consumption compared with the traditional strategies.

Based on Adaptive Backstepping Error Control for Permanent Magnet Synchronous Motor

Permanent Magnet Synchronous Motor (PMSM) displays chaotic phenomenon when PMSM in power on or power off. At present, there are many methods to control chaos in PMSM. However, there appears oscillation in course of control chaos in PMSM, which has an effect on practical application. This paper proposes error control based on adaptive backstepping to control chaos in PMSM;an error control item is added in each step virtual control design which has control effect of unknown dynamical error on system. This scheme can eliminate oscillation in course of control chaos. Finally, the simulation results show the effectiveness of theoretical analysis.

Beacon-driven Leader Based Protocol over a GE Channel for MAC Layer Multicast Error Control

In wireless networks current standard MAC layer protocols don’t provide any error correction scheme for broadcast/multicast. In this paper, we enhance a Leader Based Protocol (LBP) and propose a Beacon-driven Leader Based Protocol (BLBP) for the MAC layer multicast error control. To guarantee a very low Packet Loss Ratio (PLR) under strict delay constraints for video multicast over a Gilbert-Elliott (GE) channel, we analyze BLBP and compare it with LBP and different application layer multicast error control schemes via simulation experiments. Both the theoretical analysis and simulation results show that BLBP can correct nearly all the errors for all receivers in the MAC layer and is more efficient than LBP. BLBP is also more efficient than the application layer Automatic Repeat request (ARQ) scheme and the total multicast delay is much shorter. BLBP is very good for real-time multicast applications with strict delay constraints.

Zero phase error control based on neural compensation for flight simulator servo system

Using the future desired input value, zero phase error controller enables the overall system＇s frequency response exhibit zero phase shift for all frequencies and a small gain error at low frequency range, and based on this, a new algorithm is presented to design the feedforward controller. However, zero phase error controller is only suitable for certain linear system. To reduce the tracking error and improve robustness, the design of the proposed feedforward controller uses a neural compensation based on diagonal recurrent neural network. Simulation and real-time control results for flight simulator servo system show the effectiveness of the proposed approach.

A Priori Error Analysis for NCVEM Discretization of Elliptic Optimal Control Problem

In this paper, we propose the nonconforming virtual element method (NCVEM) discretization for the pointwise control constraint optimal control problem governed by elliptic equations. Based on the NCVEM approximation of state equation and the variational discretization of control variables, we construct a virtual element discrete scheme. For the state, adjoint state and control variable, we obtain the corresponding prior estimate in H1 and L2 norms. Finally, some numerical experiments are carried out to support the theoretical results.

Adaptive RISE Control of Winding Tension with Active Disturbance Rejection

A winding system is a time-varying system that considers complex nonlinear characteristics,and how to control the stability of the winding tension during the winding process is the primary problem that has hindered development in this field in recent years.Many nonlinear factors affect the tension in the winding process,such as friction,structured uncertainties,unstructured uncertainties,and external interference.These terms severely restrict the tension tracking performance.Existing tension control strategies are mainly based on the composite control of the tension and speed loops,and previous studies involve complex decoupling operations.Owing to the large number of calculations required for this method,it is inconvenient for practical engineering applications.To simplify the tension generation mechanism and the influence of the nonlinear characteristics of the winding system,a simpler nonlinear dynamic model of the winding tension was established.An adaptive method was applied to update the feedback gain of the continuous robust integral of the sign of the error(RISE).Furthermore,an extended state observer was used to estimate modeling errors and external disturbances.The model disturbance term can be compensated for in the designed RISE controller.The asymptotic stability of the system was proven according to the Lyapunov stability theory.Finally,a comparative analysis of the proposed nonlinear controller and several other controllers was performed.The results indicated that the control of the winding tension was significantly enhanced.

Reversible Semi-Fragile Watermarking Technique for Integrity Control of Relational Database

Reversible watermarking schemes for relational database are usually classified into two groups: robust schemes and fragile schemes. The main limitation of existing reversible fragile methods is that they cannot differentiate between legal and malicious modifications. In this paper, we introduce a novel lossless semi-fragile scheme based on prediction-error expansion for content protection of relational database. In the proposed method, all attributes in a database relation are first classified according to their sensitivity to legitimate updates. Then, the watermark is embedded by expanding the prediction error of the two least significant digits of securely selected attributes. At watermark extraction, the proposed method has the ability to fully restore the original data while detecting and localizing tampering. The applicability of our method is demonstrated theoretically and experimentally.

Machining Error Control by Integrating Multivariate Statistical Process Control and Stream of Variations Methodology

For aircraft manufacturing industries, the analyses and prediction of part machining error during machining process are very important to control and improve part machining quality. In order to effectively control machining error, the method of integrating multivariate statistical process control （MSPC） and stream of variations （SoV） is proposed. Firstly, machining error is modeled by multi-operation approaches for part machining process. SoV is adopted to establish the mathematic model of the relationship between the error of upstream operations and the error of downstream operations. Here error sources not only include the influence of upstream operations but also include many of other error sources. The standard model and the predicted model about SoV are built respectively by whether the operation is done or not to satisfy different requests during part machining process. Secondly, the method of one-step ahead forecast error （OSFE） is used to eliminate autocorrelativity of the sample data from the SoV model, and the T2 control chart in MSPC is built to realize machining error detection according to the data characteristics of the above error model, which can judge whether the operation is out of control or not. If it is, then feedback is sent to the operations. The error model is modified by adjusting the operation out of control, and continually it is used to monitor operations. Finally, a machining instance containing two operations demonstrates the effectiveness of the machining error control method presented in this paper.

Quantitative feedback theory and zero phase error tracking control combined robust control for radar truck leveling simulator

Radar leveling system is the key equipment for improving the radar mobility and survival capability. A combined quantitative feedback theory (QFT) controller is designed for the radar truck leveling simulator in this paper, which suffers from strong nonlinearities and system parameter uncertainties. QFT can reduce the plant uncertainties and stabilize the system, but it fails to obtain high-precision tracking. This drawback can be solved by a robust QFT control scheme based on zero phase error tracking control (ZPETC) compensation. The combined controller not only possesses high robustness, but greatly improves the system performance. To verify the effiectiveness and the potential of the proposed controller, a series of experiments have been carried out. Experimental results have demonstrated its robustness against a large range of parameters variation and high tracking precision performance, as well as its capability of restraining the load coupling among channels. The combined QFT controller can drive the radar truck leveling platform accurately, quickly and stably.

Use of Total Precipitable Water Classification of A Priori Error and Quality Control in Atmospheric Temperature and Water Vapor Sounding Retrieval

This study investigates the use of dynamic a priori error information according to atmospheric moistness and the use of quality controls in temperature and water vapor profile retrievals from hyperspectral infrared （IR） sounders. Temperature and water vapor profiles are retrieved from Atmospheric InfraRed Sounder （AIRS） radiance measurements by applying a physical iterative method using regression retrieval as the first guess. Based on the dependency of first-guess errors on the degree of atmospheric moistness, the a priori first-guess errors classified by total precipitable water （TPW） are applied in the AIRS physical retrieval procedure. Compared to the retrieval results from a fixed a priori error, boundary layer moisture retrievals appear to be improved via TPW classification of a priori first-guess errors. Six quality control （QC） tests, which check non-converged or bad retrievals, large residuals, high terrain and desert areas, and large temperature and moisture deviations from the first guess regression retrieval, are also applied in the AIRS physical retrievals. Significantly large errors are found for the retrievals rejected by these six QCs, and the retrieval errors are substantially reduced via QC over land, which suggest the usefulness and high impact of the QCs, especially over land. In conclusion, the use of dynamic a priori error information according to atmospheric moistness, and the use of appropriate QCs dealing with the geographical information and the deviation from the first-guess as well as the conventional inverse performance are suggested to improve temperature and moisture retrievals and their applications.

Nonlinear Attitude Tracking Control of a Spacecraft with Thrusters Based on Error Quaternions

The multi axis coupling attitude control of a spacecraft with thrusters for attitude tracking is investigated. The attitude kinematics and dynamics are both described by error quaternions. The four error quaternion dynamic equations are then transformed into four perturbed double integrators via linear transformations. An on off controller is designed based on the perturbed double integrators. The controller is determined by parabolic switching functions of the scalar error quaternion and the transfor...

Adaptive Zero Phase Error Feedforward Method for Robotic Force Control

In order to remove the time delay between the input and the output signals of a robot force control system,adaptive zero phase error feedforward(AZPEF)control method is presented and applied to PUMA 560 industrial robot,which has six degree of freedom(6-DOF).The whole adaptive force control algorithm is implemented on TMS320C30 micro-processor whose instruction cycle is 60ns.The results of the force control experiments prove that AZPEF force control makes robot have good robustness and quick response ability.

DESIGNING OF TWO NEW FUZZY CONTROLLERS WITH ERROR INTEGRAL AND THEIR APPLICATIONS IN FOLLOWING CONTROL OF WARSHIP-GUNS

Two new fuzzy controllers are designed, one's control rules are adjusted byerror integral, another are with feedforward of error integral. If only the control rules andparameters are selected felicitously, the static errors of the system will be eliminated. The testresults show that the controllers can assuredly improve static performances of the controlledsystem.

RESEARCH ON PREVIEW CONTROL TECHNIQUE BASED ON EXTENDED ERROR SYSTEM WITH DELAY

A valid preview control technique is presented for processing servo systemswith input delay based on extended error systems with input delay. The technique usesthe concept of error systems, establishes extended error systems with input delay and de-rives preview control laws based on minimization of evaluation function. Finally, simula-tion is done on linear direct current motor without brush. The results reveal that the tech-nique proposed herein is valid for improving performance of servo systems.

Study of a New Method of Tracking Control with Zero Steady-State Error on Very-Low Frequency

A servo control system is prone to low speed and unsteadiness during very-low-frequency follow-up. A design method of feedforward control based on intelligent controller is put foward. Simulation and test results show that the method has excellent control characteristics and strong robustness, which meets the servo control needs with very-low frequency.

可见光减反射膜薄层控制误差的分析与性能优化

为提升光学镜头的成像质量,消除杂散光的影响,以K9玻璃为基底设计可见光波段平均反射率小于0.1%的减反射膜。采用电子束离子辅助沉积的制备方式,针对薄层敏感度高、光谱变化大等问题,通过建立稳定控制膜层厚度的数学模型来减小膜厚误差,提高制备精度和成膜稳定性。对减反射膜进行环测实验,优化调整工艺参数,侧重提高减反射膜的硬度和耐水煮能力。实验结果表明,最终制备出的减反射膜在420~680 nm波段内的平均反射率约为0.044%,最高反射率为0.0712%,克服了以MgF2为外层的减反射膜机械性能和化学稳定性较差的问题,满足工程应用低损耗、稳定可靠、高强度、可重复性制备的要求。

CYLINDRICITY ERROR COMPENSATION IN DIAMOND TURNING VIA P－INTEGRATOR REPETITIVE CONTROL

ＣＹＬＩＮＤＲＩＣＩＴＹＥＲＲＯＲＣＯＭＰＥＮＳＡＴＩＯＮＩＮＤＩＡＭＯＮＤＴＵＲＮＩＮＧＶＩＡＰ－ＩＮＴＥＧＲＡＴＯＲＲＥＰＥＴＩＴＩＶＥＣＯＮＴＲＯＬＬｉＳｈｅｎｇｙｉ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｔｒｏｎｉｃｓａｎｄＩｎｓｔｒｕｍｅｎｔ...