Ammonium Metavanadate Fabricated by Selective Precipitation of Impurity Chemicals on Inorganic Flocculants

High purity ammonium metavanadate(NH_(4)VO_(3))is the most vital chemical to produce V2O5,VO2,VN alloy,VFe alloy and VOSO4,which have some prospective applications for high strength steel,smart window,infrared detector and imaging,large scale energy storage system.NH_(4)VO_(3)is usually produced by spontaneous crystallization from the aqueous solution due to its sharp dependence of solubility on the temperature.However,hazardous chemicals in industrial effluent,include phosphorate,silicate and arsenate,causing severe damage to the environment.In this work,these impurities are selectively precipitated onto inorganic flocculants,while the vanadate dissolved in an aqueous solution keeps almost undisturbed.Therefore,high purity NH_(4)VO_(3)is produced by the crystallization from the purified solution.By screening various flocculants and precipitating parameters,polyaluminum sulfate with an optimal amount of 50 g/L,is demonstrated to selectively remove phosphorate,silicate and arsenate,corresponding to the removing efficiency of 93.39%,97.11%and 88.31%,respectively.NH_(4)VO_(3)from the purified solution holds a purity of 99.21%,in comparison with 98.33%in the product from the crude solution.This purifying technology cannot only produce NH_(4)VO_(3)with high added value,but also reduce the environmental pollution of waste liquid.

Biological preparation and application of poly-ferric sulfate flocculant

A novel inorganic polymer flocculant,poly-ferric sulfate（BPFS） was prepared by oxidation of ferrous sulfate using domestic Thiobacillus ferrooxidans（T·f） under acid condition.The optimal conditions for the preparation were pH value of 1.5,（NH4）2SO4 dosage of 0.5 g/L,initial Fe2＋ concentration of 45g/L,inoculum 10%,rotating speed of 120 r/min,reaction time of 5-6 d and reaction temperature of 30 ℃.Under the optimal conditions,the BPFS product with pH value of 1.5-2.2,basicity of 17.5%-22.7% and total iron content of 43.87-45.24 g/L was obtained.The application of the BPFS to three wastewaters was carried out,and the removal efficiencies of COD,decolorization and Zn2＋ by BPFS can be reached 70%,90% and 99%,respectively.The result suggests that the BPFS is an excellent flocculant for water treatment.

Screening of One Microbial Flocculant for Treatment of Methyl Orange Wastewater and its Decolorization Effect

[Objective] To screen out a microbial flocculant with good decolorization effect on methyl orange wastewater,and study the effect of different cultural conditions on decolorization effect of methyl orange.[Method] Absorbance of methyl orange solution before and after decolorization was determined by spectrophotometer,and the decolorization rate was calculated to compare the effects of different cultural conditions on removal rate of methyl orange.[Result]An optimal actinomycete stain（F-1-2） was screened out,and the best cultural condition was as follows：with sucrose as carbon source and NaNO3 as nitrogen source,cultured in constant temperature oscillator at 150 r/min,30℃ for 72 h.Under the optimal condition,the removal rate against methyl orange could reach 68.4%.[Conclusion]Different culture conditions have great impact on decolorization effect of strain.

Isolation and Identification of Bioflocculant Producing Stain and Analysis on Its Flocculating Characteristics

[Objective] The aim was to indentify a bioflocculatnt producing strain W5 isolated from soil samples and analyze its flocculating characteristics. [Method] The universal primers of bacterial 16S rDNA were used for PCR amplification of its genome; effects of the medium pH,carbon and nitrogen sources on its flocculating activity were analyzed by using single factor method; and infrared spectroscopy was used for functional groups analysis. [Result] The results of homology comparison showed that strain W5 belonging to Gram-negative,long bacilli and had 98.34% of homology with Hymenobacter gelipurpurascens,. In addition,the optimum carbon source,nitrogen source,pH for fermentation condition were glucose,yeast extract and pH 7.04,respectively. Microbe flocculant produced by W5 strain （MBF-W5） was extracted and purified to obtain reddish and flocculent products. Fourier-transform infrared （FTIR） spectroscopy indicated that the major functional groups of MBF-W5 were hydroxyl,carboxyl and amino. [Conclusion] More than 85% of flocculating activity was achieved under the conditions of 150-500 μl bioflocculation dosage,5-65 ℃ temperature and pH 2-10.

Screening of a Novel Bioflocculant-producing Strain and Research on Its Flocculation

[Objective] This study aimed to screen a bacterial strain capable of producing bioflocculant. [Method] A bacterial strain T-11 capable of producing bioflocculant was isolated from activated sludge. Detailed tests on the morphological, physiological and biochemical characteristics were carried out and identification was performed to identify the strain. Finally, the bioflocculant was isolated and purified, and the flocculating activity and chemical characteristics were measured. [Result] It was identified as Serratia plumuthica based on its morphological, physiological and biochemical characteristics. This strain secreted flocculant best in a culture medium which included sucrose and NaNO3. The maximal cell growth was achieved within 10 h and the flocculating activity paralleled to it. It was found to be effective for flocculation of kaolin suspension, when added at a final concentration of 0.7 mg/L, over a range of pHs （2-7）, and temperature （approximately 30-80 ℃）. Chemical analysis indicated that the bioflocculant was an acidic polysaccharide consisting of glucose, glucuronic acid and galactose, talose and altrose. Infrared spectrum analysis also revealed typical characteristics of polysaccharides. [Conclusion] The biofloccu- lants produced by strain T-11 can greatly improve the ability of activated sludge to settle.

The flocculation efficiency of compound bioflocculant by flocculant-producing bacteria

The flucculation efficiency of compound bioflocculant produced by flocculant-producing bacteria was investigated in this study. Cheap cellulose was selected as the substrate for the production of a lower cost bioflocculant. The end product of cellulose decomposing bacteria was utilized as substrate for flocculant-producing bacteria. The optimum fermentation conditions were determined as follows： the initial fermentation and fermentation time was 5 d and 1 d respectively, the temperature was 30 ℃, the rotation speed was 120 r/min, the amount of CaCl2 solution （ 10% ） was 1.5 ml/L. The flocculation test indicated that the bioflocculant had high efficiency in the removal of the turbldity raw water from Songhua River.

Screening of flocculant-producing microorganisms and flocculating activity

A strain saccharomycete STSM-1 with high flocculanting activity was isolated from activated sludge with conventional methods. The high production rate and the low cost STSM-1 medium was obtained by selecting different kinds of media, carbon source, nitrogen source and inorganic salt ion. The best flocculant-producing conditions were found by changing medium initial pH, culture temperature and ventilation flow. The best flocculating effect was obtained by changing positive ion types, density and concentration of flocculant.

Isolation and Identification of a Flocculant Producing Strain TS-1

[Objective] The purpose was to select out and identify a flocculant producing strain which could produce high active flocculant.[Method] The strain producing high active flocculant was isolated out and purified through medium culture and the selected strain was identified through observing its culture characters and determining its physiological and biochemical property.[Result] Fourteen strains of bacteria with flocculant producing function were isolated from tested soil samples through isolation,purification and preliminary screening using dilution-spread plate method and plate streaking method.Five strains of flocculant producing bacteria showing higher flocculation activity were selected out after second screening and their flocculation rates were higher than 70%;the flocculation activity of one strain among them was still stable after multiple subculturings,its flocculation rate was always above 90% and it was marked as TS-1.TS-1 was encapsulated Gram-positive bacillus and there was no lipid in it,such as poly-β-hydroxybutyric acid.TS-1 was Bacillus amyloliquefaciens,so it was named Bacillus TS-1.[Conclusion] The strain selected out in this experiment could be used in the flocculation and biochemical treatment of wastewater from starch industry.

Screening of Bioflocculant-Producing Strains and Characteristics of Microbial Flocculation

A high effective bioflocculant-producing strain named LB1 was isolated and screened from the leachate by routine micro- method. The strain was identified as genus Pseudomonas according to the morphologic and physiological-biochemical characteristics of the strain. The biological characteristics of the microbial flocculants produced by LB1 were investigated. The results show that the optimal production period of microbial flocculant using LB1 is 96 h; and the products, found in the fermentation liquor, comprise the extracellular organic matter （EOM） of LB1 generated during LB1 growth and the secondary metabolites in the anaphase of LB1. Meanwhile, the mycelia can improve the performance of the microbial flocculants. Because heat has a greater influence on the active substance in the microbial flocculants than other factors, the activity of the flocculants decreases with increasing temperature and the time of heating. The flocculants can flocculate mud-containing and melanin-containing wastewater effectively with a flocculation ratio of 85.1% and 92.2%, respectively. The optimal heating temperature varies from 20 to 45 ℃. When flocculating the two wastewater, the flocculating activity of the flocculants is above 57.7% and 70.9%, respectively, in a wide pH range from 3 to 11.

Microbial flocculant and its application in environmental protection

The microbial flocculant is a kind of natural bio polymer and has promising future to be used in the fermentation industry and wastewater treatment. It has been studied in details in many countries, such as U.S.A, Japan. This paper reviewed the development on microbial flocculant basic studies and applications, including flocculant production microorganisms, chemical and components of microbial flocculants, flocculation mechanism of microbial flocculants, capability of microbial flocculants and influence factors, and culture conditions for flocculant production. The application cases of microbial flocculants were also discussed.

A cleaner two-step synthesis of high purity diallyldimethylammonium chloride monomers for flocculant preparation

In order to improve the flocculation efficiency of polydiallyldimethylammonium chloride（PDADMAC）, high molecular weight PDADMAC should be prepared from high purity diallyldimethylammonium chloride（DADMAC） monomers. In this paper, a cleaner method with microwave irradiation and alkali solidification was proposed for preparing high pure DADMAC by selective heating under low temperature, and the prepared high purity DADMAC is characterized using FTIR and atomic absorption spectrometry. The new method provides a solution to the key technical problem of PDADMAC synthesis. Comparing with the conventional methods, the results showed that the advantages of the novel synthesis include： （a） high purity DADMAC is improved from 57% to 71% ; （b） reaction time of tertiary amine preparation is shortened from 6 h to 7 min; （c） water instead of acetone was used as reaction medium; （d） toxic by-products, wastewater and waste gas are eliminated. Flocculant made from the synthesized high purity DADMAC monomers was proved more efficient in flocculation tests.

Characterization of a bioflocculant from a newly isolated Vagococcus sp. W31

Screening of microorganisms producing flocculating substances was carried out. A strain secreting a large amount of bioflocculant was isolated from wastewater samples collected from the Little Moon River in Beijing. Based on the morphological properties and 16S rDNA sequence analysis, the isolate (designated W31) was classified as Vagococcus sp. A bioflocculant (named MBFW31) produced by W31 was extracted from the culture broth by ethanol precipitation and purified by gel chroma-tography. MBFW31 was heat-stable and had strong flocculating activity in a wide range of pH with relatively low dosage re-quirement. MBFW31 was identified as a polysaccharide with molecular weight over 2×106. It contained neutral sugar and uronic acid as its major and minor components, respectively. Infrared spectra showed the presence of hydroxyl, carboxyl and methoxyl group in its molecules. The present results suggested that MBFW31 had potential application in wastewater treatment.

Preparation of Cationic Chitosan-Polyacrylamide Flocculant and Its Properties in Wastewater Treatment

Chitosan derived from crab shells, was used to prepare the graft polymer in aqueous solution with acrylamide （AM） and methacrylatoethyl trimethyl ammonium chloride （DMC） as raw materials and ceric ammonium nitrate （CAN） as initiator. The flocculation ability of the resulting polymer （PCAD） was studied in waste water treatment experiments. Its properties were determined on the basis of the transmittance of waste water after flocculation. The effects of ehitosan and DMC content on PCAD＇s flocculation ability were studied. Floeculation experiments were also undertaken under various pH conditions. According to the experimental data, the flocculation ability could be improved when chitosan content decreased in the raw material, but the monomer conversion would decrease obviously. When the ehitosan＇s content was more than 65%, AM and DMC groups were less on each chitosan molecule. So PCAD＇s flocculation ability was poor. Similarly, high content of DMC would result in low monomer conversion and high flocculation ability. PCAD molecules with more DMC group had more positive charges. It was favorable to flocculation. However, monomer conversion would decrease with the increase of DMC content. The suitable conditions were that chitosan and DMC contents were 65% and 15-20%, respectively. The experiment data showed that PCAD had good flocculation ability under weak acidic condition. Its ability would be weakened by strong acidic or alkaline condition. The flocculation efficiency was the best at pH of 5.5 when PCAD＇s dosage was 8mg-Lk Compared with cationic polymer （the copolymer of AM and DMC, PAD）, PCAD showed better flocculation ability under acid and neutral conditions, but worse ability under alkaline condition.

Optimum conditions to treat high-concentration microparticle slime water with bioflocculants

We studied how bioflocculants,produced by white-rot fungi,affect flocculation in slime water.Based on a test in an orthogonal design,flocculation conditions were optimized.The results show that flocculation activity is at its highest when the following conditions are met:slime water concentration 27.42 g/L;coagulant aid(CaCl_2) mass concentration 5.0 g/L;two-segment stirrings:the first at a stirring speed of 60 r/min for 180 s and the second 180 r/min for 60 s;a pH of 11 and a flocculant concentration of 15 mL/L.The flocculation activity can be up to 98.71%of bioflocculants at the time.Further experiments indicate that most of the flocculation active material is found outside the mycelium cells.This is the extracellular secretion produced by mycelium cells during the fermentation process.This flocculant has strong thermal stability.Many kinds of cations have a flocculation function to assist bioflocculants.This aid-flocculation effect of the divalent cation Ca^(2+) is obvious in the bioflocculant produced by the white-rot fungus.Therefore,this is of great value when applied to control engineering in the battle against water pollution.

Characteristics and Culture Conditions of a Bioflocculant Produced by Penicillium sp.

Objective To study the characteristics of a bioflocculant named MBF7 produced by Penicillum strain HHE-P7 and the effects of cultivation conditions on bioflocculant production. Methods The chemical group in the bioflocculant molecules was shown by Fourier transform infrared （FTIR） spectra, and the average molecular weight of MBF7 was estimated by gel permeation chromatography. The effects of medium components on bioflocculant production and flocculating activity were studied. Results Phospho-, amino-, hydroxyl, and carboxyl groups were the major fractions of MBF7, and the molecule weight was about 3.0 × 10^5 Da. In addition, the carbon and nitrogen sources favorable for the bioflocculant production were glucose and yeast extract respectively. When the initial pH of the medium was adjusted to 5.0, high flocculant efficiency could be achieved. Conclusion The bioflocculant MBF7 is a new macromolecule with high flocculating efficiency for Kaolin suspension, and could be produced under appropriate culture conditions.

Security evaluation of compounded microbial flocculant

A new kind of compounded microbial flocculant (CMBF) for water and wastewater treatment has been developed through biological technology. In order to discuss its biological security, four groups of experiments, rat acute toxicity test via mouth, salmonella assay in vitro, mouse micronucleus in vivo test and teratogenesis test were conducted to evaluate its general toxicity, genotoxicity and generative toxicity. The experimental results showed that this type of compounded microbial flocculant was a substantial non-toxic substance based on the fact that LD50 value was over 10 mg/kg. The results from salmonella in vivo test and mouse micronucleus in vivo test revealed that the compounded microbial flocculant is a genetically non-toxic substance. Furthermore, compounded microbial flocculant has little effect on the growth of all the rats, and any morphologic abnormal phenomenon hasn’t appeared.

Application of organic polymeric flocculants in centrifugal dewa-tering of oil refinery sludge

In order to evaluate the applicability of the organic polymeric flocculants(OPF) in the treatment of oil refinery sludge, experiments were conducted to show that OPF have better performance of flocculation than inorganic flocculants. Both the anionic and cationic OPF have satisfactory flocculation efficiency in oil sludge treatment, but the latter are more cost efficient. Among the over 20 types of flocculants tested, 2 OPF(CPAM 2 and HPAM 2) were selected as the treatment agents, based on their good treatment performances, oil resistance and economic feasibility. It was demonstrated in the industrial scale centrifugal dewatering experiments that the application of either CPAM 2 or HPAM 2 could achieve high treatment efficiency of the oil sludge dewatering and reduce the COD of centrifugal liquid to less than 1000 mg/L.

DMC-grafted cellulose as green-based flocculants for agglomerating fine kaolin particles

Novel cellulose based flocculants C-g-P(DMC) with various chain architectures are synthesized through a situ graft copolymerization. The cationic ammonium chloride group(DMC) is grafted onto cellulose by two separate inverse emulsion polymerization with γ-methacryloxypropyl trimethoxy silane(KH-570) and double bond addition reactions, which is a new and simple method to employ KH-570 as a bridge for the connection of cellulose matrix and DMC group. The effects of pH, flocculant dose, standing time on turbidity of kaolin suspensions and particle sizes have been studied systematically. In addition, the response surface methodology(RSM) study confirms that PAC and C-g-P(DMC)have synergy in turbidity removal with a higher removal efficiency of 98.32%. Moreover, C-g-P(DMC) 1 has higher removal efficiency with 96.5% at a low dosage of 0.6 mg L^(-1) and better floc properties than C-g-P(DMC) 2 and C-g-P(DMC) 3, suggesting that the length and quantity of cationic branch chains play a crucial role in Kaolin flocculation due to their dramatically enhanced bridging effects.

Experimental research on Phanerochaete chrysosporium as coal microbial flocculant

The flocculation effect of the Phanerochaete chrysosporium on the coal slurry were studied by orthogonal experimental method in this study.The results of research show that the P.chrysosporium has a good effect on flocculating coal slurry.The optimum combination of the experimental is the P.chrysosporium,which is cultured in 2 days,mixed with 2 mL coagulant and 2 mL broth.The flocculant is a broken liquid with pH value of 6.The hightest flocculation ratio is 93.5%.The result of FTIR shows that the biological extraction of P.chrysosporium contains a lot of acidic polysaccharides that has the effect on flocculation.Microbial flocculant molecules and particles of coal slurry could be flocculated by‘‘absorption bridge’’.

Application Research Status and Development Prospect of Microbial Flocculant

Microbial flocculant （MBF） is a kind of novel flocculant, which is widely used for the food industry, highly concentrated organic waste water treatment and the urban water supply technology. Due to its characteristics of superior flocculation effect, without secondary pollution to the environment and being easily degraded, MBF has been emerging as a hotspot of water treatment research in recent years. In this paper, the latest progress of the preparation of MBFs and the flocculating mechanism were presented. The practical application research of MBFs for water treatment was reviewed. Finally, suggestions and development prospect of research on MBFs were discussed.